• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2546-2548
• /
• 2001

The contributing proportion of the increase of port productivity is more increasing concerning not only the port industry, but also all the informations of container crane which is the representative equipment by the rapid increase of the volume of freight of port. The basic of rapid service is the improvement of the productivity, the information of operation as to the productivity of crane for the quick handling within yard and especially the informations of breakdown and to handle breakdown as soon as possible has a great effect on the increase of productivity.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2759-2760
• /
• 2003

The contributing proportion of the increase of port productivity is more increasing concerning not only the port industry, but also all the informations of container crane which is the representative equipment by the rapid increase of the volume of freight of port. The basic of rapid service is the improvement of the productivity, the information of operation as to the productivity of crane for the quick handling within yard and especially the informations of breakdown and to handle breakdown as soon as possible has a great effect on the increase of productivity.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.8-9
• /
• 2019

The rebar work is a labor intensive construction work with a high labor cost ratio. It is difficult to manage the productivity, construction time, and safety of rebar work. The problem of productivity decreased in rebar construction is due to a lack of workers according to the aged workers. Partial prefabrication rebar can be an alternative solution to productivity decreased in rebar work. The characteristic of partial prefabrication method is that time consuming component such as stirrup of beam assemble in factory and others assemble in site. Therefore, in this study, the time required for each rebar assembly method is measured and analyzed to confirm the possibility of productivity improvement.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.353-357
• /
• 2004

The construction competition is more deepened with the enterprise possibility increase which it follows in the regulation relaxation back against the construction market penetration which carries and the instability of market is added an extra weight and it solves the aspect where also the profitability which is caused by with low price bidding decreases. Against a productivity with the overcome plan it is researched plentifully and the far for a productivity improvement, there is so far to construction, the productivity being used with only include meaning, is to a practical affairs and the application ver)r as the level which is feeble is a possibility of doing. It is like that and the research develops the producing district possibility of new steel-frame work and in the actuality which sees the production volume of steel-frame work and a construction accomplishment process effectively and to be right numerical figures it does it plans it controls and manages the place ultimate objective which it puts.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.593-596
• /
• 2006

Productivity is the most important factor directly link to success and failure of a work in construction industry. To evaluate this productivity, simulation technique is verified as a fine inspection tool through various experiment reports. On this project, we have proved the part of improvement on productivity using this simulation technique, applied to this field sites. We have used CYCLONE, which is the most appropriate simulation technique on this project. As a result of Simulation analysis, it has been confirmed that the productivity was enhanced due to the advancement of equipment, hence the reduction of air is being effected.

• Journal of Environmental Health Sciences
• /
• v.3 no.1
• /
• pp.27-44
• /
• 1976

This study was carried out to evaluate the harmful factors in working environments and to investigate the labor productivity after improvement of environments, surveying 93 industrial establishments of 10 industries located in Youngdeungpo industrial area in Seoul. The results obtained were as follows: 1) The highest noise level of 125dB(A) was indicated at the rolling process of transport equipment manufacturing industry. 2) The best illumination level was shown in precise machinery industry and the worst was indicated in rubber products, metallic products and transport equipment manufacturing industries. 3) Thermal conditions were above threshold limit value (TLV) at more than two processes of all industries except printing industry. 4) The highest dust concentration was determined in textile and wearing manufacturing industry. 5) Organic solvents were detected at 52 processes in 93 industrial establishments and 33 processes of them showed higher than TLV. The results about harmful chemicals were as follows: a) sulfur dioxide ($SO_2$)was determined higher than TLV on welding process of metallic product manufacturing industry and heat treatment process of transport equipment manufacturing industry. b) Carbon monoxide (CO) concentration was 700ppm at heat treatment process of transport equipment manufacturing industry, indicating 14 times of TLV. c) vinylchloride concentration in the air of PVC raw material mixing process and PVC preparation process of chemical product manufacturing industry was determined higher than TLV. d) Hydrochloride (HCl) concentration in the air of wire expanding process of transport equipment manufacturing industry was determined higher than TLV. 7) Higher values of lead concentration than TLV were determined at lead welding metallic product manufacturing industry and type planting process of process of printing industry, $1.8mg/m^3$ and $0.3mg/m^3$ respectively. 9) 22, 968 of 52, 855 workers (i.e. 43.5%) in 93 industries were exposed to various harmful agents. 10) It was found that the improvement of illumination in electric apparatus manufacturing industry (from 20~40 lux to 420 lux) resulted in an increase in productivity of 6.5% per capita and a decrease in faulty products of 19%. 11) Improvement of environments using local exhaust ventilation system resulted in a decrease of harmful substances lower than TLV and an increase in productivity of 11.4%. 12) Improvement of shovelling tools based on ergonomics resulted in a reduction in energy expenditure of 25.3% and an increase in productivity of 32.2% per capita.

• International Area Studies Review
• /
• v.14 no.2
• /
• pp.43-60
• /
• 2010

This paper measures R&D efficiency and productivity changes of 24 nations including Korea, Japan and China by the non-parametric Malmquist productivity index. The principle findings of this study are as follows. First, R&D efficiency scores of Korea and Japan are 0.837 and 0.834 respectively. Meanwhile China shows 0.420, the worst performance among the selected countries. Second, Korea marked annual productivity increase of 25%, highest among the selected countries', for 2000-2005. R&D productivity in Japan and China, however, decreased 1.9% and 0.9% respectively. Third, annual rates of technology change and technical efficiency change in Japan are 0.6% and -2.5%. Therefore decrease of productivity in Japan is mainly due to technical inefficiency. In case of China, improvement of technical efficiency is the main contributor to productivity growth but technical progress has edged downward in the sample period. In Korea, with annual rate of technology change and technical efficiency change being 5.2% and 18.2% respectively, both efficiency improvement and technical progress has pulled the R&D productivity growth.

• International Area Studies Review
• /
• v.22 no.1
• /
• pp.41-60
• /
• 2018

It is widely known that the increased productivity lead to a decrease in energy consumption. The policy for reducing energy consumption is also focusing on the improvement of firm's productivity. However, the issue of productivity dilemma phenomenon is recently raised in various fields. It is phenomenon that the increased productivity rather lead to a increased in energy consumption through a rise in output. This paper analyzed the presence of productivity dilemma in korean firm using Tang et al(2015)'s theoretical model. To closely analyze, I performed the analysis using 715 firms during 2011-2015 and estimated the model using system GMM to minimize the endogeneity. The results show that total effect of productivity had a significantly negative coefficient. It is implies that the increased productivity doesn't increase energy consumption. In other word, this paper could not identified productivity dilemma and so did in overseas investment firm and national firm cases.

• Journal of Information Technology Services
• /
• v.10 no.2
• /
• pp.61-74
• /
• 2011

SMEs(Small and Medium-sized Enterprises) have implemented the various IT-based Production Information Systems(PIS) to cope with the highly competitive environment as well as to improve their competitiveness and productivity. For the efficient development of PIS In SMEs, standardizing the system development process is required. Methodology for the development of PIS is especially important for the systematic and efficient implementation to communicate among the SI companies, SMEs, and a supervision agency. TIPA(Korea Technology and Information Promotion Agency for SMEs) has developed PSDM(Production System Development Methodology), and supplies it to the SI companies. The research goal of this paper is to explore the productivity improvement by adopting the PSDM with the cases of SI companies applied PSDM. The results show that such benefits as risk management, productivity improvement, easy system implementation and maintenance are perceived by PSDM Users. This research could be the first case study reveal the effectiveness of PSDM. For further research, the survey could be carried out with more samples.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.113-119
• /
• 2000

This study is to investigate the effects of cold forming method with steel sheet of SCP3C to improve continuous productivity. Experiments were carried out in various working conditions, such as the number of stamping and the punch temperature. The effects of the punch temperature and the number of stamping on drawability of steel sheet of SCP3C as well as clearance and draw-in in tile number of stamping were examined and discussed. The cooled the punch and the die and the blankholder heated by stamping were achieved at continuous productivity and quality improvement. The optimum forming condition for drawing trunk floor panel of SCP3C is shown as the punch is cooled by coolant of $-5^{\circ}C$ and at the same time both the die and the blankholder are heated by stamping and frictional heat,