• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.70-78
• /
• 1997

3Y-TZP/SUS316 Functionally Graded Material (FGM) was fabricated by slip casting method. Alumina mold was used to overcome problems of gypsum mold in slip casting process, and the optimal dispersion con-ditions of 3Y-TZP/SUS316 binary slurries was determined using electrokinetic sonic amplitude and a viscometer, and observing sedimentation behavior. The properties of the specimens casted by gypsum mold and alumina mold were compared in terms of changes in shrinkage rate, drying and sintering conditions, and microstructure. It was found that the specimens obtaine from the alumina mold showed a clean surface, easier thickness control of each layer, and higher productivity. Especially, no degradation was observed in the SUS316 prepared using alumina mold. Thus it is desirable to use porous alumina mold rather than gyp-sum mold for the slip casting of 3Y-TZP/SUS316-FGM.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.129-136
• /
• 2011

Simulated Moving Bed(SMB) process consists of multiple chromatographic columns, which are usually partitioned into four zones. Such a process characteristic allows a continuous binary separations those are impracticable in conventional batch chromatographic processes. Compared with batch chromatography, SMB has advantages of continuity, high purity and productivity. Various researches have been reported for the integration of reaction and recovery during process operation on the purpose of economics and effectiveness. Simulated Moving Bed Reactor(SMBR) is introduced to combine SMB as a continuous separation process and reactor. Several cases of SMBR have been reported for diverse reactions with catalytic, enzymatic and chemical reaction on ion exchange resin as main streams. With an early type of fixed bed using catalyst, SMBR has been developed as SMB using fluidized enzyme, SMB with immobilized enzyme and SMB with discrete reaction region. For simple modeling and optimization of SMBR, a method considering convection only is possible. A complex method considering axial dispersion and mass transfer resistance is needed to explain the real behavior of solutes in SMBR. By combining reaction and separation, SMBR has benefits of lower installation cost by minimizing equipment use, higher purity and yield by avoiding the equilibrium restriction in case of reversible reaction.

• Korean Journal of Ecology and Environment
• /
• v.33 no.3 s.91
• /
• pp.282-294
• /
• 2000

The reproductive ecology and the early life history of Macropodus chinensis were investigated in aquarium. Mature male made the bubble nest and spawned with wrapping the female and reverse posture. The parental male protected the offspring until the larvae depart the bubble nest. Egg productivity and egg hatching rate were the highest at water temperature in $28^{\circ}C$ and $26^{\circ}C$ respectivity than any other artificial temperature. The eggs were buoyant, globular and 0.95${\sim}$1.05 mm in diameter. Cleavage was progressed at intervals of 15 minutes. Eggs hatched in 42${\sim}$44hours after fertilization and the newly hatched larvae were 3.0${\sim}$3.2 mm in total length. The lawae were 4.5${\sim}$5.4 mm in 4${\sim}$5 days after hatching and fed on the food with dispersion from the nest. In 40${\sim}$45 days after hatching, all fin rays completely developed, and juveniles reached 18.2${\sim}$23.5 mm in total length. In 90${\sim}$110 days after hatching, body from of young fishes were similar to adult with 37.4${\sim}$48.2 mm and represented secondary sexual characters longer than 45.0 mm in total length, and about 120 days, fishes began spawning(water temperature for ontogenesis: $26.0{\pm} 1^{\circ}C$).

• Journal of Information Management
• /
• v.37 no.2
• /
• pp.1-20
• /
• 2006

It has lately been recognized that the sharing and exchanging of the research results information is the critical factor to improve the research productivity. So many institutions are planning or developing the information systems which provide the research information services for researcher. But it has very difficulty in integrating the research resources information due to the dispersion and heterogeneity in data sources, and semantic and structural difference in describing data. We propose the semantic web based methodology and conceptual framework for raising the interoperability of metadata about research results information, which will support the integration of the distributed research data for information services in the end. We first introduce the ontology which is developed based on Standard Metadata of Research Results Information published by STISC. Then to show the applicability in real-world environment, we express the metadata of research information in RDF/RDFS according to ontology. Finally we proposed the conceptual architecture of research information service system which shows the main components, the functional requirements, and the principal and design direction at implementing the system.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.12-18
• /
• 2022

Korea depends on the import of raw materials such as iron ore and coal for the steel industry. These raw materials have a major impact on the cost, productivity, and quality competitiveness in the global steel industry. To secure the competitiveness of steel companies, it is necessary to reduce the country's dependence on raw materials. This can be achieved using byproducts with a high Fe content, which are primarily generated by the steel industry. These byproducts are available in the form of a very fine powder, which can disperse as dust when used directly in plant processes. Dust dispersion has a negative impact on the environment and can lead to the loss of raw materials. To enable the use of a wide range of Fe-containing byproducts, it is necessary to pretreat them in the form of larger aggregates such as pellets and briquettes. There are several methods to achieve such aggregates. There are two ways to produce briquettes: using a hot briquette, which supplies additional heat to produce briquettes, or using a cold briquette, which does not use heat. A method for producing cold briquettes using Fe-containing byproducts was investigated in this study. The yield ratio and briquette strength were examined under various manufacturing conditions.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.596-604
• /
• 1996

This study was carried out to offer the successive method of cultivation and increase the productivity of mushroom yield with good quality through the elevation of rate of spawn development for Lentinus edodes. Studied about the analysis of current management of actural cultivation, a base of these, researched and presented for the upward method of productivity through an experiment of the high rate of spawn development and cultivation, putting first cultural environment. The results obtained were as follows ; 1. As the result of the analysis of current management in actural cultivation, many cultivators had a tendency to neglect managements of cultivation. These were reason for the deficiency of labour, funds and the lack of knowledge of cultivation, etc. 2. Water contents in bed logs according to the date of inoculation was shown as the decreasing order of 28.63%(3/12), 25.20%(3/25) and 23.19%(4/10). For the purpose of the maintenance of the water contents, the full-development of mycelium in bed logs and the dispersion of labour, the date of inoculation should be started in the early March. 3. The difference of the rate of spawn development among species was not shown, 100%(Mori 465). 98.98%(Mori 3046) on the spawn in high temperature and 98.97%(Mori 290) on the spawn in low temperature. The relative rate of spawn development was 97.70%(Mori 465), 82.45%(Mori 3046) on the spawn in high temperature and 88.87%(Mori 290) on the spawn in low temperature, it showed the difference. The spawn should be selected carefully in the future, as the spawn of cultivater's preference showed the difference for the development of mycelium. 4. The rate of spawn development following the date of inoculation was 100.0%(3/12), 98.98%(3/25) and 96.79%(4/10) on the spawn in high temperature and 99.09%(3/12), 98.97%(3/25) and 97.89% (4/10) in low temperature, it showed little difference. And the relative rate of spawn development was 97.70%(3/12), 82.45%(3/25) and 81.42%(4/10) on the spawn in high temperature and 93.27%(3/12), 89.67%(3/25) and 88.87%(4/10) that in low temperature, As the result of the relative rate, the time of inoculation of spawn should begin in the early March. 5. The height of stock logs on temporary placing should be less than 60cm at most on the surface, because of the low rate of water contents.