• Journal of the korean society of oceanography
• /
• v.39 no.3
• /
• pp.186-196
• /
• 2004

Since seagrasses are highly productive and provide a source of organic carbon for a wide variety of marine organisms in coastal and estuarine ecosystem, accurate assessment of seagrass production is critical to understand the functions and values of seagrasses in these ecosystems. Zieman's leaf marking technique has been mostly used to estimate seagrass leaf production rates. However, inherent problems on the traditional leaf marking technique have been discussed by the several researchers, and these problems can cause underestimation of seagrass production. To develop an accurate and reliable assessing method for seagrass production, production rates of eelgrass, Zostera marina in three bay systems on the south coast of the Korean peninsula were estimated using the conventional leaf marking technique and the plastochrone method. The plastochrone method has been recently suggested as an effective method for reliable assessments of seagrass production. In the present study, leaf production rates estimated by the plastochrone method were significantly higher than the rates derived from the traditional leaf marking technique. Annual eelgrass leaf production assessed using the leaf marking technique was about 65 to 89% of the estimated production using the plastochrone method. The differences in annual productions between assessment techniques imply that the conventional leaf marking technique significantly underestimated eelgrass leaf production. Total eelgrass productions estimated using the plastochrone method in the present study sites were about 600 to 806 g DW $m^{-2} y^{-l}$, and below-ground production accounted for about 20 to 23% of the total production. The plastochrone method was suggested to be an effective and accurate assessing method for eelgrass production.

• Journal of Korean Society of Rural Planning
• /
• v.6 no.2 s.12
• /
• pp.59-72
• /
• 2000

This study examines the rural village planning in North Korea after the Liberation of Korea in 1945. For conducting this study, the creation of rural villages in North Korea were investigated according to the following periods: from the Liberation of Korea to the outbreak of the Korean War, from the end of the Korean War to the 1950's, 1960's, 1970's and 1980's. In this study, major rural villages were also examined and common characteristics of rural village-making in North Korea were analyzed. The following are the findings from this study. In rural village planning, historic revolutionary sites and buildings, where revolutionary achievements of Kim, Ill-Sung and Kim, Jung-Ill were reached, are well preserved and actively created. (2) Rural villages are intended to be a place for ideological education, productive activities and cultural refreshment. (2) In rural village-making, inclined planes are utilized, in consideration of climatic and topographic conditions. (4) The construction of residential areas with modern private houses is considered to be important in the making of socialistic and communist rural communities in North Korea. (5) For economic reasons, existing villages, buildings and facilities are preserved and local building materials are broadly used.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1114-1121
• /
• 2022

Construction laborers and crews play a critical role in achieving a safe and productive construction site. Many past research studies used top-down approaches/perspectives for studying the impact of laborers' performance on overall construction site outputs with limited flexibility in accounting for laborers' various characteristics. However, the recent reap in computational advances allowed applications of bottom-up architectures, which can potentially incorporate heterogeneous characteristics of laborers' individual behavioral and decision-making features effectively. Accordingly, agent-based modeling (ABM), as a tool to leverage a bottom-up methodological approach, has been widely adopted by recent research. Existing literature investigated the influence of changes in laborers' behaviors and interactions on either construction sites' safety performance or productivity performance individually, leaving the tradeoff between safety and productivity in this context relatively unexplored. Accordingly, this study aims to develop an agent-based framework to study the tradeoff between project safety and productivity performances resulting from changes in laborers' behaviors after attending safety trainings. Our findings via simulations indicate that proper safety trainings can improve safety performance without negatively impacting productivity performance.

• Journal of Korean Public Health Nursing
• /
• v.13 no.2
• /
• pp.131-142
• /
• 1999

The purpose of this study is to grasp the relationship between the amount of physical activities at work perceived by workers and their health promotion behaviors. To achieve such a purpose. this survey was conducted on 476 Workers who work for 3 food product work-sites located in Keong-in area by means of questionnaire from June 15 to July 14 . 1998. Collected data were statistically analyzed by SPSS/WlN. The significant results were obtained as follows. 1. The average scores of the amount of physical activities at work and health promotion behavior were 3.18 and 2.84 respectively; the former was slightly higher than moderate score 2.5 and the latter was almost the same as it. It can be interpreted that workers perceive their physical activities at work are heavier than their daily activities, which seems to make their health promotion behaviors still inactivated. 2. The amount of physical activities at work, it was were greater revealed that the more activities workers do after work. the more they walk and the more exercises they do. It implies that the voluntary practice of good health habit at leisure can be greatly contributed to the activation of more productive activity at work. 3. The amount of health promotion behaviors was larger as workers do more physical activities at work and have lower PIBW(Percent Ideal Body Weight). It means that the voluntary practice of good health habit is closely related to the degree of obesity and their positive attitude toward their work. Average PIBW was 106.71; most of the workers are distributed within the standard range in their weight. So we can presume that most of them are not seriously conscious of weight maintenance in their daily lives. Therefore it is desirable that health promotion program for workers should be developed toward connecting their physical activities at work with those in their daily lives much more. Physical activities, health promotion behaviors

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.68-71
• /
• 2004

Hsinchu Science Park, one of the most productive electronic sites in the world, is located at Hsinchu County. Hsinchu County Government is entitled for daily management to pursue the objectives of making every county citizen prosperous. Several web-based management information systems have been developed for county management and were widely implemented. However, forest management is one of several tasks which need development of web-based geographic information systems. The objectives of this paper are to develop GIS for forest management at Hsinchu County in order to solve problems encountered in the rapid changing circumstance. The objectives of forest management at Hsinchu County have been changed a little bit in the last decade. Now, it mainly focuses on public and private forest, tree planting, wind break forest management, and plane forest planting. The major ingredients of GIS for forest management are user-friendly, task-oriented, and direct linking to the existing GIS at Hsinchu County. AreIMS and ArcGIS were used for web-based GIS. Field operations of forest management depend on PDA and GPS such that ArcPAD is implemented both on personal computers and PDA. Computer programming is required for database management and development of application modules in forest management. Color digital orthophoto maps at scale of 1:5000 provide very useful background information. Forest management at Hsinchu County now is operated in an efficient way that GIS, remote sensing, GPS and PDA are working smoothly.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.79-79
• /
• 2017

Grain Sorghum varieties grown in Korea have low productivity and are constrained by the fact that farmers' choice of improved varieties is limited. Hybrid cultivars have been demonstrated to be more productive and food security than pure line varieties. However, There's no available hybrid cultivars and never planted before in Korea. This study was, therefore, conducted to determine combining ability of Korean landrace varieties and cultivar, the level of heterosis of experimental hybrids depending on environments. Two cytoplasmic male-sterile lines were crossed with six male-fertile lines in accordance with North Carolina II mating scheme to generate 12 experimental hybrids. The hybrids were evaluated in replicated row-column alpha designs at two sites in Texas and South Korea under on-season production conditions. For each trait, general combining ability (GCA) and specific combining ability (SCA) effects were estimated using the line-tester method of analysis. Results indicated significant differences among genotypes for both grain yield potential and secondary traits. Hybrids were predominant for grain yield, and displayed up to 127% heterosis of A03017 ${\times}$ Sodamchal in Korea. Positive GCA for yield was observed for Donganme, Hwanggeumchal and Jungmo4002 in Korea. Among them Jungmo4002 and Donganme had highly positive for yield (227.90 and 84.90 kg ha-1), while it showed negative GCA for yield in College station (-40.90, -189.60 kg ha-1). ATx630 ${\times}$ Sodamchal had the greatest SCA for yield (468.10 kg/ha) in College station but at South Korea its SCA effect was -302.40 kg/ha. A similar trend was observed, followed by A03017 ${\times}$ Donganme (SCA effect = 215 kg ha-1 at College station vs. -44.20 kg ha-1 at South Korea). At South Korea the greatest positive SCA effect for grain was observed in ATx630 ${\times}$ Jungmo4002 as 322.20 kg/ha. Both GCA and SCA effects significantly interacted with site effects demonstrating the need for region adaptation of potential cultivars and test for developing Korea suitable cultivar.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.31-40
• /
• 2018

Since the Millennium Ecosystem Assessment Report was published in 2005, the conflict between development and the preservation of the ecological environment has turned to paying attention to value assessments in rational decision-making. In recent years, the concept of ecosystem services has been recognized as a viable one for making significant decisions. However, a trade-off between increase and decrease occurs between the ecosystem services sub-categories (cultural service, regulating service, supporting service, and provisioning service), for which research centering on target sites is needed. To this end, the present study aims to investigate the trade-off relationship between service categories to search for reasonable decision-making strategies. As the research method, a survey was conducted using the translated version of SoIVES(Social Value for Ecosystem Services) 3.0 questionnaire of the United States Geological Survey. The research findings demonstrate the economic value, based on the derived monetary value of each service category, the economic value of the target site was compared among landscape aesthetic value 8,050,000 won, recreation value 6,750,000 won, biodiversity value 4,610,000 won, healing value 3,970,000 won, life-sustaining value 2,090,000 won, and productive value 220,000 won. And then the primarily recognized value criteria of the Tancheon ecosystem services illustrate landscape aesthetic and recreation value. Besides, this study illustrates visualized trade-off relationships based on user perception, and the derived relations illustrate the trade-off relationship between the cultural service, regulating service, supporting service, and provisioning service, as well as relationships between the components of the sub-categories.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.3
• /
• pp.186-192
• /
• 2004

Purpose: Human tooth proteins are highly heterogeneous, comprising diverse proteins derived from a number of genes. The attempts to identify protein for activity of tooth matrix proteins have been defied by several factors. First, the amount of proteins within teeth is very small relative to many extracellular matrix proteins of other tissues. Second, the bioassay system is tedious and needed for long time. Therefore we tried to find easy techniques, which increase the product rate, and an assay of small proteins, with which amino acid sequence is possible without additional procedures. Materials and Methods: Total protein were extracted from 300 g enamel removed teeth and 600 g teeth with 4 mol/L guanidine HCl and purified by gel chromatography. Aliquot of proteins was implanted into muscle pouches in Sprague-Dawley rats for bioassay. By SDS-PAGE and membrane blotting, molecular weight of each protein was estimated and a partial amino acid sequence was obtained. Each fraction blotted on the membrane was cut out and inserted in rat ectopic model. Results: In dissociative method, total tooth proteins were obtained 1mg/ml from enamel removed teeth and 3.5 mg/ml from teeth. In SDS-PAGE, four clear bands at the sites corresponding to 66, 40, 20 and 18 kD. Especially The 66 kD band was clearly exhibited. Amino acid sequencing from tooth could be possible using PVDF membrane blotting technique. In amino acid sequencing, 66 kD protein was identified as albumin. Conclusion: Compared with conventional method for extraction of teeth protein and bioassay of proteins, the methods in this study were easy, time-saving and more productive technique. The matured tooth proteins omitting additional procedure of mechanical removal of enamel were simply analyzed using blotted PVDF membrane. This method seems to make a contribution as a technique for bioassay and amino acid sequencing of protein.

• Journal of Korean Society of Rural Planning
• /
• v.2 no.2
• /
• pp.57-66
• /
• 1996

The purpose of this study is to suggest the rural village model which is able to be applied to the rural village (re)development. The rural village model consists of five sector models land use model, residential unit model, public facilities allocation model, productive space arrangement model, road & green system model. The village model as a spatial structure needs modification/revision through the its application to various sites. The following are suggestions developed in the process of preparing a model for the Korean rural village. First, some indices presented in the land use model need to be further studied as the planning indices before implementing the rural village projects. Second, it is recomended that the image of a rural village needs to be created by developing the residential unit(6 households) as a planning development unit, And various residential unit models need to be suggested. Third, it is desirable to develop the double circulation system and green edge(1 m), and to introduce pedestrian road as much as possible for the amenity of the residential environment, Fourth, being located within walking distance from the existing village, new-introduced site should be developed as a interlinked and opened structure. The rural village model is useful in preparing the spatial structure for the village (re)development, and in finding the best design solution responsive to the conditions of a project site.

• Journal of agriculture & life science
• /
• v.53 no.6
• /
• pp.35-44
• /
• 2019

The objectives of this study were to identify engineering problems in the design and installation of cable logging operation that affects productivity through case study of actual logging sites, and to analyze associated productivity loss and increased cost. As a result of the study, when the geographic conditions and engineering safety of the site are not sufficiently considered, deflection of the cable line can not be secured. Hourly productivity of the operation decreased to 65% and the logging cost increased by more than two times compared to the productive yarding operation, which lowered overall efficiency of the operation. Thus, it is required to spread filed technologies that minimize unnecessary production cost incurred due to the in-efficient logging operations as well as secure work safety and efficiency to expand cable logging operation throughout the country.