• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.137-153
• /
• 2007

Failure mode and effects analysis (FMEA) is a preventive technique in reliability management field. The successful implementation of FMEA technique can avoid or reduce the probability of system failure and achieve good product quality. The FMEA technique had applied in vest scopes which include aerospace, automatic, electronic, mechanic and service industry. The marking process is one of the back ends testing process that is the final process in semiconductor process. The marking process failure can cause bad final product quality and return although is not a primary process. So, how to improve the quality of marking process is one of important production job for semiconductor testing factory. This research firstly implements FMEA technique in laser marking process improvement on semiconductor testing factory and finds out which subsystem has priority failure risk. Secondly, a CCD position solution for priority failure risk subsystem is provided and evaluated. According analysis result, FMEA and CCD position implementation solution for laser marking process improvement can increase yield rate and reduce production cost. Implementation method of this research can provide semiconductor testing factory for reference in laser marking process improvement.

• IE interfaces
• /
• v.5 no.2
• /
• pp.29-37
• /
• 1992

An approach to Just-In-Time for small job-shop-type manufacturers is presented. This is aimed at those who understand the pull production system, however, cannot afford either swift changeover in workcenters or frequent delivery to customers. First, as a production planning technique, a lot-sizing model entitled Multilevel Least Total Cost Model(MLTCM) is developed; The production order quantities of each components be those requiremensts of the end item production lot. The contribution of MLTCM is shown via simulation. Then, a framework of the Kanban operations is designed; A Production Control Kanban is introduced as a communication tool with Production Kanban in a job-shop.

• Journal of the Korea Society for Simulation
• /
• v.11 no.4
• /
• pp.69-80
• /
• 2002

This study deals with the productivity improvement on a flow production system with the consideration of line-balancing. In a flow production system, similar product models are produced on a same assembly line, the predefined process order and the limitation of total worker number. The system can be increased the work-in -process(WIP) inventory and the worker's idle time. In this study, the worker assignment model is developed to assign evenly workload of process to each product model in such a manner that each process has the different number of worker. This worker assignment model is the mathematical model that determines worker number in each process such that the idle time of processes is reduced and the utilization of worker is improved. We use a simulation technique to simulate the production line proposed by the mathematical model and apply real production line. With the result of simulation, this study analyzes the propriety of production line and proposes the alternatives of new production line

• Journal of Embryo Transfer
• /
• v.8 no.1
• /
• pp.37-44
• /
• 1993

Nuclear transplantation techinque has been found to be the most potential and efficient method for producing a large number of genetically identical animals from a single embryo. The technical development of nuclear transplantation in mammals and its application to the production of cloned animals were reviewed. For the efficient and successful production of cloned embryos by nuclear transplantation, selection and micromanipulation of recipient eggs or embryos as capacious recipient cytoplasm, and benefitial preparation of multiple totipotent embryonic cells as donor nuclei, and also fusion technique are very critical. Recent works approaching to these critical points were introduced and discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.115-121
• /
• 1995

The objective of this study is to develope an effectiveness measurement technique for U-shaped JIT production line by computer simulation. A small and medium sized automobile brake master cylinder manufacturing plant is studied for productivity improvement The production line is analysed and improved by applying Low Cost Automation, special jigs and fixtures, and facilities layout changes. An experimental simulation model is built using SIMAN(SIMulation ANalysis) simulation software for the production system analysis.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.106-110
• /
• 1998

Some successful scheduling systems are based on simulation technique. However, they are relatively expensive. A cost-effective solution is to apply general-purpose simulation software to the scheduling system. This paper is concerned with developing a simulation model for MPS(Master Production Schedule) evaluation system. The target system of the model is PC production system. AIM (Analyzer for Improving Manufacturing system), a well-known manufacturing oriented simulation software, is used for modeling tool. Eventually, the model can be included into an MPS evaluation system as simulation module and a scheduler can use the system to verify the MPS in advance.

• Korean Management Science Review
• /
• v.1
• /
• pp.35-45
• /
• 1984

This paper deals with the case study of the establishment of decision supporting system in shipbuilding industory. Facts or information of shipbuilding, sales, finance, production strategic planning in shipbuilding industry are considered. General transportation model for shipyard production schedule is formulated, and shipbuilding demand forecasting scheme is also introduced. This paper shows the several methods of DSS in shipbuilding industry. But production schedule strategic planning system by OR technique is emphasized. For the realization of DSS in shipbuilding industry, another efforts (data gathering and programming etc.) should be given on the basis of these methods.

• BMB Reports
• /
• v.41 no.5
• /
• pp.353-357
• /
• 2008

LRR family proteins play important roles in a variety of physiological processes. To facilitate their production and crystallization, we have invented a novel method termed "Hybrid LRR Technique". Using this technique, the first crystal structures of three TLR family proteins could be determined. In this review, design principles and application of the technique to protein crystallization will be summarized. For crystallization of TLRs, hagfish VLR receptors were chosen as the fusion partners and the TLR and the VLR fragments were fused at the conserved LxxLxLxxN motif to minimize local structural incompatibility. TLR-VLR hybridization did not disturb structures and functions of the target TLR proteins. The Hybrid LRR Technique is a general technique that can be applied to structural studies of other LRR proteins. It may also have broader application in biochemical and medical application of LRR proteins by modifying them without compromising their structural integrity.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.117.4-117
• /
• 2001

This paper introduces the movement creation and control technique of an avatar, whose replacement of the user is increasing due to the rapid development of the internet and hardware that generalizes the VR. A 3D avatar´s movement is usually created through the key-framing technique or motion-capture equipment. This paper introduce the production of the avatar´s movement by constructing a articulated avatar whose speed and movement are automatically created by the neural oscillatory network and avatar´s joint is controlled by the use of kinematics and motion editor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.3
• /
• pp.313-316
• /
• 2000

Three Holstein steers, fitted with ruminal and duodenal cannulas, were used in a replicated $3{\times}3$ Latin square design to determine the digestibility of dietary nitrogen in total digestive tract by three methods, 1) mobile nylon bag (MNB); 2) total fecal collection (TFC); and 3) washed fecal sample after freezing and thawing through a sieve with a pore size of $45{\mu}m$ (WFS). A basal diet of oaten hay-barley was supplemented with one of the following protein sources; soybean meal, fish meal or blood meal. Steers were fed at a level of 2% of body weight. The experimental diets were contained approximately 1.85% nitrogen. There were no differences (p>0.05) among the diets on DM, NDF and nitrogen disappearances, and the diet results were pooled to assess the methods. Total tract disappearances of dry matter and neutral detergent fiber were 61.6, 71.1 and 78.9 and 25.3, 63.2 and 64.6 for MNB, TFC and WFS methods, respectively. The lower digestibility of DM and NDF in the MNB method could be a result of low ruminal incubation time. The TFC method had the lower (p<0.05) determination of nitrogen disappearance in the total digestive tract than the MNB and WFS methods. On the other hand, nitrogen disappearance in the total digestive tract determined by the WFS technique was comparable to that in MNB technique, as there was no significant difference (p>0.05) between the methods. It is shown that the disappearance of dietary nitrogen in the total digestive tract could be estimated in the intact animals by using washed fecal sample prior to freezing and thawing.