• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.125-133
• /
• 2016

From the first application of a thermoelectric module to nowtoday, it has been more than half a century. The application of a thermoelectric module is becoming more and more widely accepted since, people's requirement rely more and more on the efficiency of thermoelectric modules and their reliability become higher and higher. So people pay more and more attention to the thermoelectric module. In Around the world, the more research for into improving the efficiency of thermoelectric modules is focused on the current materials. at present. However, the research of into available materials had has some limitations, and the research of materials had reached a bottleneckthere are limits to current applications. On the other hand, from the production process, if we assembled by materials withoutmodules without any damages and achieve the ideal state of a joint, we can make the a product to maximize performance and have a longer service life. SoTherefore, in this study we will prove the relationship between the any defects inside and the efficiency of a thermoelectric module to improve the quality management and performance of modern thermoelectric modules at present.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5117-5122
• /
• 2011

In this paper, thermal analysis simulation program by taking advantage of COMSOL Multiphysics, LED Module for the production of the most preferred package type, omitting the COH Type COB Type and board simulation of the thermal analysis is in progress. LED Module that passes through the Heat-sink of the simulation results, depending on the location of the COB Type Max. Approximately $78^{\circ}C$ ~ Min. Approximately $62^{\circ}C$, COH Type the Max. Approximately $88^{\circ}C$ ~ Min. Approximately $67^{\circ}C$ has been confirmed that the temperature stability. Compared with COB Type Max. AIthough temperature difference is about $10^{\circ}C$, Min. At a temperature of about $5^{\circ}C$ confirmed to be enough to reduce the gap, LED Point confirming the results of the temperature curves for COB Type Max. Approximately $100^{\circ}C$ ~ Min. Approximately $77^{\circ}C$, COH Type the Max. Approximately $100^{\circ}C$ ~ Min. Approximately $86^{\circ}C$ temperature stability was confirmed that, COB Type COH Type, compared to approximately $10^{\circ}C$ temperature was higher.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.55-60
• /
• 2019

Smart-phone in the recently released high-end applied to the camera module is equipped with the most features auto focusing camera module. Also, auto focusing camera module is divided into voice coil motor, encoder, and piezo according to type of motion mechanism. Auto focusing camera module is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. VCM actuator is made of magnet, yoke as a metal, and coil as a copper wire. Recently, the assembly as yoke and magnet is made by human resources. These process has a long process time and it is difficult to secure quality. Also, These process is not economical in cost, and productivity is reduced. Therefore, an automatic assembly as yoke and magnet is needed in the present process. In this paper, we have developed an automatic assembly device that can automatically assemble yoke and magnet, and performed verifying performance. Therefore, by using the developed automatic assembly device, it is possible to increase the productivity and reduce the production cost.

• IE interfaces
• /
• v.15 no.4
• /
• pp.325-337
• /
• 2002

In this study we consider the problem of production planning of TFT-LCD(Thin Film Transistor - Liquid Crystal Display) production factory. Due to the complexities of the TFT-LCD production processes, it is difficult to schedule the production planning, and the study about automated scheduler is insufficient. In addition, the existing production method is a Push-System to raise the operation rate with expensive equipment, that has the problem to satisfy the due-date. This study presents an algorithm having a concept of Pull-System that satisfies the due-date and considers specialties of TFT-LCD production process. We make MPS(Master Production Schedule) according to the sales order, and present algorithms for scheduling about In/Out plan considering factory capacity, line balancing, material requirement, and inventory level of all Array, Cell, and Module processes. These algorithms are integrated as an automated production system, and we implement them in the actual TFT-LCD factory circumstance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.13-14
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.31-32
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.155-156
• /
• 2010

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.1
• /
• pp.15-20
• /
• 2014

The manufacturing equipment on most shop floors consists of numerical control machines, and the condition of each piece of equipment is monitored and controlled by an internal sensor or programmable logic controller (PLC). To control and monitor production lines that consist of an equipment or production module, a separate control and monitoring system such as a manufacturing execution system should be introduced. However, there is no standardized system, and it is costly and difficult to build a system for small or medium-sized plants. In this paper, a PLC-based supervisory system for operation control of a group of production machines is proposed, and the developed PLC-based system is evaluated by applying it to a computer numerical control machine.

• IE interfaces
• /
• v.12 no.3
• /
• pp.424-436
• /
• 1999

Due to environmental change in market, delivery satisfaction to customers and reduction of lead time are critical in the make-to-order manufacturing system. A case of production scheduling process restructuring is studied for one company which employed ERP system. Based on the standard module ERP package provided, they modified and added several functions for their specific processes, and implemented it in production scheduling. The ratio of delivery satisfaction has been improved from 51.1% to 60.8%, and manufacturing lead time has been reduced from 43 days to 30 days in average during 10 months. Moreover, they achieved several side effects such as real time production scheduling and workload analysis, information sharing over all departments, and improving flexibility in receiving orders.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.561-571
• /
• 2012

In this study, which is the basis for industrial presses to target small and medium enterprises with production information system is designed. Production information in real time on-site digitizing and transmitting data to a standard PC is to base operations. Personnel management, safety management, production management is to increase the efficiency. Therefore, at low cost is to encourage computerization within the company. These embedded systems and wireless communication module has a database management program installed in order to raise productivity and competitiveness will improve.