• 품질경영학회지
• /
• 제48권3호
• /
• pp.453-462
• /
• 2020

Purpose::This study aims to analyze the management performance and production efficiency of medicinal crop farmers. Methods: We conducted an empirical survey of medicinal crop farmers and analyzed production efficiency using DEA method. Results: First, The crops that increased the number of farms during 2010 and 2018 were Angelica tenuissima and Salvia miltiorrhiza, which was attributed to higher income per hour than other crops. Second, As for the efficiency of Liriope platyphylla, the average was 0.376, and the coefficient of variation was the lowest, 0.566. Third, Salvia miltiorrhiza and Atractylodes japonica had the highest technical efficiency after Liriope platyphylla, but the variation coefficient was high and the efficiency was relatively high. Fourth, As a result of performing variance analysis to find out the difference of each crops on the value of medicinal crop efficiency, the technical efficiency, pure technical efficiency, and scale efficiency were all statistically significant. Conclusion: Based on the results above, following policy suggestions are offered. First, It is necessary to provide information on crops with high income compared to the input of labor, and to develop labor-saving cultivation technologies for each crop. Second, A stable labor supply system will be needed in rural areas. Third, Efforts should be made to close the technological gap between farmers through a lot of education and consulting for farmers who grow medicinal crops.

• 자원ㆍ환경경제연구
• /
• 제20권1호
• /
• pp.33-60
• /
• 2011

본 연구의 목적은 생산 프론티어 접근을 통하여 OECD 국가의 에너지효율과 경제성장이 에너지수요에 미치는 영향을 비교하는 것이다. 본 연구는 OECD 국가를 대상으로 전통적 에너지 원단위와 생산 프론티어 접근에 의한 에너지효율, 생산 프론티어 상의 효율점에서 에너지 과다 여유분의 존재, 생산의 기술구조 하에서 GDP 증가에 따른 에너지수요 탄력성을 살펴보았다. 첫째, 전통적 에너지 원단위는 방사선 에너지효율과는 상관성이 낮고 여유분 에너지효율, 비방사선 에너지효율과 에너지 최소화 방향의 수평선 에너지효율 등과는 일정한 상관성을 보인다. 에너지 원단위만으로 에너지효율 여부를 판단하는 것은 오류가 있을 수 있다. 특히 방사선 효율에 의한 에너지효율은 대부분의 국가의 에너지효율을 과대평가하는 경향이 있다. 둘째, OECD 국가들이 프론티어 상의 효율적인 생산점에서도 불필요하게 에너지를 소비하는 것이 연평균 17.3%이므로 에너지의 추가 저감이 필요하다. 셋째, OECD 국가의 경제성장에 대한 에너지 탄력성의 평균은 1.1로서 거의 단위 탄력성에 가깝다. 탄력성의 국가별 차이는 존재하고 탄력성이 높은 국가의 에너지수요는 높다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권5호
• /
• pp.677-684
• /
• 2003

Twenty eight multiparous lactating cows were utilized in an experiment to evaluate the response to an exogenous fibrolytic enzyme on their lactational performance during early lactation period (in terms of milk production, milk composition, feed intake, milking efficiency, body weight change) and the exact time of this response. Cows were randomized into two groups (14 each) with similar parities and were fed a concentrate ration of barley, ground corn, soybean meal, and wheat bran and roughage ration of alfalfa hay. One of the two groups was supplemented with the fibrolytic enzyme immediately after parturition up to 100 post partum. The experiment was of two phases with 50 days each. The enzyme, which has a cellulase/hemicellulase activity (derived from Trichoderma group), was added to the concentrate part of the ration in a dry powder form. Milk production, 3.5% fat corrected milk, energy corrected milk were higher (p<0.05) for cows fed treated diet. At the same time, No differences were observed in percentages of milk components, feed intake, body weight, body weight change, or rectal temperature for the whole experimental period or during any of the two phases. Efficiency of milk production was higher (p<0.05) for treatment group cows than for that of the control ones. However, efficiency was better during the second phase than during the first phase. Feeding enzyme treated diets to dairy cows improved lactational performance during early 100 day of the lactation period. However, the first 50 days of lactation looked to be the critical.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 1998년도 춘계학술대회 및 워크숍
• /
• pp.12-28
• /
• 1998

The technology of creating transgenic animals has a potential value in improving productivity and disease resistance of animals, gene therapy, drug pharming and production of model animals for certain diseases. Up to date, fairly low success rate of production of transgenic animals and a pronounced variability with respect to the expression of transgenes have been much observed. The mechanisms how to integrate the injected genes with a certain part of the genomes are unknown yet. Many techniques in gene transfer, beside microinjection, have been introduced and explored thus to improve the production efficiency of transgenic animals. In this article, the methods and efficiency of gene-transfer techniques, the detection and preselection of transgenes in embryos by PCR- and GFP-screenings and cloning of preselected transgenic embryos by nuclear transplantation are described and discussed. Some experimental results showed that the early screening and selection of integration of the injected gene with embryonic genome by polymerase chain reaction(PCR) and green fluorecence protein(GFP) were promising methods. Further, the application of nuclear transplantation technology to cloning and multiplication of the positively integrated genes in the cleaving embryos and embryonic cells will be beneficially used for the mass production of transgenic embryos and consequently improving the production efficiency in transgenic animals.

• 시스템엔지니어링학술지
• /
• 제20권spc1호
• /
• pp.30-44
• /
• 2024

The DMAIC methodology, which is most familiar to battery production system developers, is partially inadequate in its conformity to utilize battery production system tasks, so it is necessary to improve the function and structure of the methodology, but many battery production system developers use the DMAIC method based on experience, causing side effects such as confusion, delay in tasks, and insufficient performance during tasks. Accordingly, we intend to conduct an empirical study to improve the "efficiency improvement and conformity evaluation method" so that the DMAIC methodology can be used more reasonably and easily. Using the three-stage research model, we derive components that affect conformity through literature and questionnaire surveys in the first stage, use relational characteristics between components in the second stage to confirm the effect on conformity, and use the relational characteristics in the third stage to confirm the possibility of improving efficiency by applying them to the DMAIC methodology in actual cases. Finally, the "Conformity Assessment Index (CAI) equation" based on relational characteristics is established to enable effective conformity evaluation and continuous improvement.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.921-930
• /
• 2013

From an economic perspective, an enterprise's business activity depends on the efficient use of corporate resources for generating profits. However, on the enterprise side, it is difficult to measure and evaluate the effective use of each resource. This paper suggests an alternative for eliminating process inefficiencies in the consolidation of competitive power in auto parts manufacturing company A. Multitudinous process variables from company A's raw materials-to-shipment process are configured as input resources, and a Data Envelopment Analysis(DEA) is carried out to determine economical benefit of said resources' operation, as well as how products are manufactured. The DEA model offers a non-parametric approach to measuring relative efficiency using input and output factors. Furthermore, AHP is used for logically deciding the importance of each evaluation factor. In general, DEA models have been used for measuring efficiency of the service and public sectors. However, this study focused on measuring the efficiency of SMEs production lines.

• 한국수정란이식학회지
• /
• 제30권4호
• /
• pp.345-350
• /
• 2015

In the last 10 years, porcine somatic cell nuclear transfer to generate transgenic pig has been performed tremendous development with introduction and knockout of many genes. However, efficiency of porcine somatic cell nuclear transfer is still low and embryo transfer (ET) is one of important step for production efficiency. In porcine ET for production of transgenic cloned pig, we can consider many of points to increase production rates. In respect of seasonality and weather, porcine ET usually is not performed in summer and winter. Cloned transgenic embryos must be transferred into reproductive tracts of recipients where embryos are located after natural fertilization with similar estrous cycle. If cloned embryos with 2~4 cell stage are transferred, they must be transferred into oviducts in periovulatory stage. Number and deposition sites of transferred cloned embryos are important. And we must compare the methods of ET between surgical and non-surgical ones in respect of production efficiency. Sow recipients after natural estrus is most preferred recipients however its cost is must be considered. Here we will review many of current studies about porcine embryo transfer to increase production efficiency of transgenic pigs and strategies for further studies.

• Architectural research
• /
• 제18권2호
• /
• pp.59-64
• /
• 2016

Since the massive power outages that hit across the nation in September 2011, a growing imbalance between energy supply and demand has led to a severe backup power shortage. To overcome the energy crisis which is annually repeated, a policy change for deriving energy supply from renewable energy sources and a demand reduction strategy has become essential. Buildings account for 18% of total energy consumption and have great potential for energy efficiency improvements; it is an area considered to be a highly effective target for reducing energy demand by improving buildings' energy efficiency. In this regard, retrofitting buildings to promoting environmental conservation and energy reduction through the reuse of existing buildings can be very effective and essential for reducing maintenance costs and increasing economic output through energy savings. In this study, we compared the energy reduction efficiency of national power energy consumption by unit production volume based on thermal power generation, renewable energy power generation, and initial and operating costs for a building retrofit. The unit production was found to be 13,181GWh/trillion won for bituminous coal-fired power generation, and 5,395GWh/trillion won for LNG power generation, implying that LNG power generation seemed to be disadvantageous in terms of unit production compared to bituminous coal-fired power generation, which was attributable to a difference in unit production price. The unit production from green retrofitting increased to 38,121GWh/trillion won due to the reduced energy consumption and benefits of greenhouse gas reduction costs. Renewable energy producing no greenhouse gas emissions during power generation and showed the highest unit production of 75,638GWh/trillion won, about 5.74 times more effective than bituminous coal-fired power generation.

• 농업과학연구
• /
• 제33권2호
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• 기술혁신연구
• /
• 제17권2호
• /
• pp.131-158
• /
• 2009

각 의사결정단위(decision making unit: DMU)의 효율성을 추정하는 기법의 하나인 '확률적 프론티어 분석'(Stochastic Frontier Analysis)을 사용하여 국내 공공 연구기관에 소속된 기술이전조직의 기술이전 관련 활동들의 성과에 영향을 미치는 요인들의 효과를 분석하였다. 확률 프론티어 분석에서 독립변수들은 효율적 생산기술('생산 프론티어')에 직접 영향을 미치거나 생산 프론티어와 관측치의 거리로 표현되는 DMU의 효율성에 영향을 미치는 것으로 가정된다. 해외의 선행 연구에서는 인력, 연구개발비 등의 투입변수들은 생산 프론티어에 영향을 미치고, 그 밖의 환경 또는 조직 관련 변수들은 효율성에 영향을 미치는 것으로 가정되었다. 본 연구에서는 환경 및 조직변수들이 선행 연구의 영향 경로와 다른 방식으로 성과에 영향을 미치는지 여부를 밝히기 위해 여러 형태의 모형을 추정하였다. 본 연구에서 도출된 주요 결과는 다음과 같다. 첫째, 투입 요소 가운데 연구개발비가 성과의 증가에 가장 확실한 영향을 미치는 것으로 나타났다. 둘째, 기관유형, 기관의 소재 지역 등의 환경변수들이 성과에 영향을 미치는 것으로 나타났나. 셋째, 기술이전과 관련된 보상시스템 등의 일부 조직변수들이 성과에 영향을 미치는 것으로 나타났다. 넷째, 환경변수와 조직변수들은 DMU의 효율성에 영향을 주기 보다는 생산 프론티어에 직접 영향을 미치는 것으로 나타났다. 다섯째, 일부 모형에서는 거의 모든 DMU의 효율성이 1에 가까운 것으로 나타났는데 이는 효율성을 기준으로 공공 연구기관의 기술이전 활동성과를 평가하는 것은 효과적이지 못하다는 것을 시사한다. 본 연구의 결과는 추가적인 자료를 통해 보완되어야 한다. 또한 더욱 일반적인 생산함수 형태를 고려할 필요가 있으며 산출 거리함수 등의 개념을 이용하여 복수산출물의 경우까지 분석 범위를 확장할 필요가 있다.