• Journal of Korean Society for Quality Management
• /
• v.48 no.3
• /
• pp.453-462
• /
• 2020

Purpose::This study aims to analyze the management performance and production efficiency of medicinal crop farmers. Methods: We conducted an empirical survey of medicinal crop farmers and analyzed production efficiency using DEA method. Results: First, The crops that increased the number of farms during 2010 and 2018 were Angelica tenuissima and Salvia miltiorrhiza, which was attributed to higher income per hour than other crops. Second, As for the efficiency of Liriope platyphylla, the average was 0.376, and the coefficient of variation was the lowest, 0.566. Third, Salvia miltiorrhiza and Atractylodes japonica had the highest technical efficiency after Liriope platyphylla, but the variation coefficient was high and the efficiency was relatively high. Fourth, As a result of performing variance analysis to find out the difference of each crops on the value of medicinal crop efficiency, the technical efficiency, pure technical efficiency, and scale efficiency were all statistically significant. Conclusion: Based on the results above, following policy suggestions are offered. First, It is necessary to provide information on crops with high income compared to the input of labor, and to develop labor-saving cultivation technologies for each crop. Second, A stable labor supply system will be needed in rural areas. Third, Efforts should be made to close the technological gap between farmers through a lot of education and consulting for farmers who grow medicinal crops.

• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.33-60
• /
• 2011

The purpose of the article is to compare the impacts of energy efficiency and economic growth for energy demand through production frontier approach in OECD countries. We compared the traditional energy intensity with energy efficiencies of production frontier approach, slack efficiency on the frontier, and estimated elasticity of energy demand for GDP growth. First, the energy intensity has a low relationship with energy efficiency by radial approach, but has constant correlations with slack energy efficiency, slack-adjusted efficiency by non-radial approach, and energy efficiency by horizon approach. If we measure energy efficiency only with energy elasticity, it may make a mistake. Especially the energy efficiency by radial approach has a tendency to overestimate most OECD countries. Second, as many countries have excess energy consumption of 17.3% even on the points of the frontier, reduction of energy consumption is necessary in addition. Third, the average energy elasticity of OECD countries is 1.1 close to elasticity 1. There exists the difference of elasticity among countries and the energy demands are also high in countries with high elasticity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.677-684
• /
• 2003

Twenty eight multiparous lactating cows were utilized in an experiment to evaluate the response to an exogenous fibrolytic enzyme on their lactational performance during early lactation period (in terms of milk production, milk composition, feed intake, milking efficiency, body weight change) and the exact time of this response. Cows were randomized into two groups (14 each) with similar parities and were fed a concentrate ration of barley, ground corn, soybean meal, and wheat bran and roughage ration of alfalfa hay. One of the two groups was supplemented with the fibrolytic enzyme immediately after parturition up to 100 post partum. The experiment was of two phases with 50 days each. The enzyme, which has a cellulase/hemicellulase activity (derived from Trichoderma group), was added to the concentrate part of the ration in a dry powder form. Milk production, 3.5% fat corrected milk, energy corrected milk were higher (p<0.05) for cows fed treated diet. At the same time, No differences were observed in percentages of milk components, feed intake, body weight, body weight change, or rectal temperature for the whole experimental period or during any of the two phases. Efficiency of milk production was higher (p<0.05) for treatment group cows than for that of the control ones. However, efficiency was better during the second phase than during the first phase. Feeding enzyme treated diets to dairy cows improved lactational performance during early 100 day of the lactation period. However, the first 50 days of lactation looked to be the critical.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 1998.05a
• /
• pp.12-28
• /
• 1998

The technology of creating transgenic animals has a potential value in improving productivity and disease resistance of animals, gene therapy, drug pharming and production of model animals for certain diseases. Up to date, fairly low success rate of production of transgenic animals and a pronounced variability with respect to the expression of transgenes have been much observed. The mechanisms how to integrate the injected genes with a certain part of the genomes are unknown yet. Many techniques in gene transfer, beside microinjection, have been introduced and explored thus to improve the production efficiency of transgenic animals. In this article, the methods and efficiency of gene-transfer techniques, the detection and preselection of transgenes in embryos by PCR- and GFP-screenings and cloning of preselected transgenic embryos by nuclear transplantation are described and discussed. Some experimental results showed that the early screening and selection of integration of the injected gene with embryonic genome by polymerase chain reaction(PCR) and green fluorecence protein(GFP) were promising methods. Further, the application of nuclear transplantation technology to cloning and multiplication of the positively integrated genes in the cleaving embryos and embryonic cells will be beneficially used for the mass production of transgenic embryos and consequently improving the production efficiency in transgenic animals.

• Journal of the Korean Society of Systems Engineering
• /
• v.20 no.spc1
• /
• pp.30-44
• /
• 2024

The DMAIC methodology, which is most familiar to battery production system developers, is partially inadequate in its conformity to utilize battery production system tasks, so it is necessary to improve the function and structure of the methodology, but many battery production system developers use the DMAIC method based on experience, causing side effects such as confusion, delay in tasks, and insufficient performance during tasks. Accordingly, we intend to conduct an empirical study to improve the "efficiency improvement and conformity evaluation method" so that the DMAIC methodology can be used more reasonably and easily. Using the three-stage research model, we derive components that affect conformity through literature and questionnaire surveys in the first stage, use relational characteristics between components in the second stage to confirm the effect on conformity, and use the relational characteristics in the third stage to confirm the possibility of improving efficiency by applying them to the DMAIC methodology in actual cases. Finally, the "Conformity Assessment Index (CAI) equation" based on relational characteristics is established to enable effective conformity evaluation and continuous improvement.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.6
• /
• pp.921-930
• /
• 2013

From an economic perspective, an enterprise's business activity depends on the efficient use of corporate resources for generating profits. However, on the enterprise side, it is difficult to measure and evaluate the effective use of each resource. This paper suggests an alternative for eliminating process inefficiencies in the consolidation of competitive power in auto parts manufacturing company A. Multitudinous process variables from company A's raw materials-to-shipment process are configured as input resources, and a Data Envelopment Analysis(DEA) is carried out to determine economical benefit of said resources' operation, as well as how products are manufactured. The DEA model offers a non-parametric approach to measuring relative efficiency using input and output factors. Furthermore, AHP is used for logically deciding the importance of each evaluation factor. In general, DEA models have been used for measuring efficiency of the service and public sectors. However, this study focused on measuring the efficiency of SMEs production lines.

• Journal of Embryo Transfer
• /
• v.30 no.4
• /
• pp.345-350
• /
• 2015

In the last 10 years, porcine somatic cell nuclear transfer to generate transgenic pig has been performed tremendous development with introduction and knockout of many genes. However, efficiency of porcine somatic cell nuclear transfer is still low and embryo transfer (ET) is one of important step for production efficiency. In porcine ET for production of transgenic cloned pig, we can consider many of points to increase production rates. In respect of seasonality and weather, porcine ET usually is not performed in summer and winter. Cloned transgenic embryos must be transferred into reproductive tracts of recipients where embryos are located after natural fertilization with similar estrous cycle. If cloned embryos with 2~4 cell stage are transferred, they must be transferred into oviducts in periovulatory stage. Number and deposition sites of transferred cloned embryos are important. And we must compare the methods of ET between surgical and non-surgical ones in respect of production efficiency. Sow recipients after natural estrus is most preferred recipients however its cost is must be considered. Here we will review many of current studies about porcine embryo transfer to increase production efficiency of transgenic pigs and strategies for further studies.

• Architectural research
• /
• v.18 no.2
• /
• pp.59-64
• /
• 2016

Since the massive power outages that hit across the nation in September 2011, a growing imbalance between energy supply and demand has led to a severe backup power shortage. To overcome the energy crisis which is annually repeated, a policy change for deriving energy supply from renewable energy sources and a demand reduction strategy has become essential. Buildings account for 18% of total energy consumption and have great potential for energy efficiency improvements; it is an area considered to be a highly effective target for reducing energy demand by improving buildings' energy efficiency. In this regard, retrofitting buildings to promoting environmental conservation and energy reduction through the reuse of existing buildings can be very effective and essential for reducing maintenance costs and increasing economic output through energy savings. In this study, we compared the energy reduction efficiency of national power energy consumption by unit production volume based on thermal power generation, renewable energy power generation, and initial and operating costs for a building retrofit. The unit production was found to be 13,181GWh/trillion won for bituminous coal-fired power generation, and 5,395GWh/trillion won for LNG power generation, implying that LNG power generation seemed to be disadvantageous in terms of unit production compared to bituminous coal-fired power generation, which was attributable to a difference in unit production price. The unit production from green retrofitting increased to 38,121GWh/trillion won due to the reduced energy consumption and benefits of greenhouse gas reduction costs. Renewable energy producing no greenhouse gas emissions during power generation and showed the highest unit production of 75,638GWh/trillion won, about 5.74 times more effective than bituminous coal-fired power generation.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.179-193
• /
• 2006

Technical efficiency of semiforcing watermelon growers is 0.8248 on average, and distributed between 0.6744 and 0.9268. The result showed that semiforcing watermelon growers had by 18% of technical inefficiency and could be assumed that increasing technical efficiency could induce watermelon production more increase. Consequently, if growers' technical efficiency were improved while other environments were constant, watermelon production could be increased. Following the results from the inefficiency effect model, all assumption coefficient such as growers age etc, are significant at 10% level. Estimate of dispersion parameter ${\gamma}$ is 0.89, which confirms those differences between practical output and frontier output were derived from the technical efficiencies among growers. Differences of production system between high and low level growers in production efficiency were showed at side altitude, ventilation and heat-retaining in section of facilities and automation, soil test and calcium application in section of environment management, transplant preparation and duration of pollination in section of crop management and shipment place, sorting degree and management record analysis in section of business management respectively. As a result of analyzing consulting data by using standard diagnosis table of watermelon cultivation under structure which cultivated on semi-forced watermelon growers, gap between high and low level growers was 7.0 points in facility automation section, 7.1 points in environment section, 8.8 points in crop management section and 13.6 points in business management section, respectively, which were the biggest one among them. In case of excluding information-related items from the evaluation index of business management section, changes of business achievement are to occur. Therefore, it is recommended for us to review the standard diagnostic table of watermelon cultivation under structure by dividing evaluation index of management section into management and information.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.131-158
• /
• 2009

We examine the effects of environmental or organizational factors on the performance of TLOs(technology transfer offices) in the PRIs(Public research institutes) using SFA(Stochastic Frontier Analysis), a technique for estimating the efficiency of DMUs(decision making units). In SFA, independent variables are assumed to determine the efficient production technique(production frontier) or affect the efficiency of DMUs. Previous researchs show that input variables such as number of personnel, R&D expenditure affect the production frontier while environmental or organizational variables affect the efficiency. We tried to estimate various types of models to find out whether environmental or organizational variables affect output variables differently from the previous research. Main empirical findings are as follows. First, R&D expenditure tends to increase all output variables considered. Second, environmental factors such as type of institutions and location of institutions affect the level of outputs. Third, organizational factors such as reward system for technology transfer also appear to affect the output variables. Fourth, environmental or organizational variables affect the production frontier directly rather than affect the efficiency of DMUs. Lastly, the efficiency of each DMU appear to be 1 or near to 1. Since almost all DMUs are equally efficient, it may not be effective to evaluate technology transfer activities of PRIs by efficiency criteria. We believe that this research should be complemented by additional data. More general types of production function need to be considered, and new techniques with concepts like output distance functions need to be developed to analyse multiple outputs simultaneously.