• Journal of Embryo Transfer
• /
• v.26 no.3
• /
• pp.147-152
• /
• 2011

This study was conducted to examine whether efficiency of oocyte production from superovulated prepubertal goats. Fifteen prepubertal and twenty adult goats, maintained in a pen under natural day length and fed hay ad libitum, were pretreated with progestagen implanted CIDR for 10 days. Superovulation treatment of the goats received twice daily intramuscular injection of a total of 70 mg FSH for 3 days from Day 8 of CIDR. All the gonadotrophin treated goats were injected with 10 mg $PGF_2{\alpha}$ on Day 8 and 400~600 IU hCG in the afternoon on Day 10. Oocytes were recovered by follicle aspiration or oviduct flushing at 35 to 40 h after hCG injection through mid-ventral incision. The in vivo matured oocytes was activated by ionomycin (5 min) and 6-DMAP (3.5~4 h). The activated oocytes were cultured in mSOF medium containing 0.8% BSA at 38.5$^{\circ}C$ in an atmosphere of 5% CO$_2$, 5% O$_2$, 90% N$_2$ for 7~8 days. There was no significant difference in the mean number of CL and in vivo matured and follicular oocytes recovered. But, quality of I + II grade follicular oocytes was lower (p<0.05) in the prepubertal goat (25.0%) than the adults (52.4%). The same results were also observed in the cleavage and blastocyst rate of activated oocytcs. The cleavage and blastocyst rate from prepubertal derived oocytes were lower (p<0.05) in the prepubertal goat (54.5%, 23.3%) than the adult goat (86.8%, 46.6%). Considering overall these results, we suggest that maturation of donor goats is a major factor affecting recovered oocytes quality and in vitro development of activated goat oocytes.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.104-109
• /
• 2010

Purpose: $[^{18}F]$Fallypride plays an effective radiotracer for the study of dopamine $D_2/D_3$ receptor occupancy, neuropsychiatric disorders and aging in humans. This tracer has the potential for clinical use, but automated labeling efficiency showed low radiochemical yields about 5~20% with relatively long labelling time of fluorine-18. In present study, we describe an improved automatic synthesis of [$^{18}F$]Fallypride using different base concentration for routine clinical use. Materials and Methods: Fully automated synthetic process of [$^{18}F$]Fallypride was perform using the TracerLab $FX_{FN}$ synthesizer under various labeling conditions and tosyl-fallypride was used as a precursor. [$^{18}F$]Fluoride was extracted with various concentration of $K_{2.2.2.}/K_2CO_3$ from $^{18}O$-enriched water trapped on the ion exchange cartridge. After azeotropic drying, the labeling reaction proceeded in $CH_3CN$ at $100^{\circ}C$ for 10 or 30 min. The reaction mixture was purified by reverse phase HPLC and collected organic solution was exchanged by tc-18 Sep-Pak for the clinically available solution. Results: The optimal labeling condition of [$^{18}F$]Fallypride in the automatic production was that 2 mg of tosyl-fallypride in acetonitrile (1 mL) was incubated at $100^{\circ}C$ for 10 min with $K_{2.2.2.}/K_2CO_3$ (11/0.8 mg). [$^{18}F$]Fallypride was obtained with high radiochemical yield about $66{\pm}1.4%$ (decay-corrected, n=28) within $51{\pm}1.2$ min including HPLC purification and solid-phase purification for the final formulation. Conclusion: [$^{18}F$]Fallypride was prepared with a significantly improved radiochemical yield with high specific activity and shorten synthetic time. In addition, this automated procedure provides the high reproducibility with no synthesis failures (n=28).

• Journal of Plant Biotechnology
• /
• v.42 no.2
• /
• pp.71-76
• /
• 2015

Developed countries have set seed industry as a new growth engine, which demands strong support from the government. Multinational seed companies such as Monsanto and DuPont have made huge financial investment to secure their major roles in the global market. To spur domestic seed industry performance, Korean government laid out the foundation for developing seed industry through policy promotion in the late 2000s. In this paper, I look at the current state of the domestic and international seed market to provide information for improving the efficiency of the propulsion of the Golden Seed Project (GSP) along with its vision. The increasing size of global giant companies has been regarded to monopolize the world seed industry wherein ten renowned companies occupy 73% of the overall global market. In effect, this causes a price hike due to limited seed choices. Domestic seed market has been stuck in a range due to a sustained low agricultural production resulting in decreased seed demand and market size. Though breeding technologies for rice and vegetables are world-class, the technologies for top global crops such as cabbage, paprika, and forage are insufficient therefore professionals in this field are not easily employed. Moreover, there is a lack in appropriate infrastructure set up in the universities which adds to ineffective training of professionals. Being a key-supporting industry for agriculture, seed industry should be granted with strong and sustainable investment support from the government. In view thereof, GSP, which started in 2012, ambitions to spur researches outlined by excellent professionals in universities and seed companies aimed to drive seed export volume and quality and attain domestic seed self-sufficiency through adoption of export- and import-substitution seed types (10 varieties each) development strategies. To develop Korea's seed industry excellent achievement of GSP's goals should be drawn successfully and to do this beside development of high quality seeds, support programs for promotion of seed exports are also needed.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.37-49
• /
• 2008

In general, most of the firms do not settle down in one place for their pursuit of profit. There are many reasons for the relocation of the firms; procurement of raw material, market area, transportation cost and housing cost. The aspect of national policy, firm relocation has been systemically promoted for the purpose of logistics system efficiency. Nowadays balanced regional development has been issue. Another aspect, many countries have struggled for the preoccupancy of new place because of its production cost saving and curtailment of expenditure. The aim of this article is qualitative and quantitative analysis of relocation influence factors of domestic goods firms in Korea. This article dynamically analyzed the relocation influence factors for domestic goods firms in Korea. For the analysis this article made use of complementary survey (2006) out of the 3rd national logistics survey (2005). The complementary survey conducted pre-business district, business period, relocation reason, etc. This article dynamically analyzed from the three aspects; observation of average residence time in one business district, relocation factors, influence of market area. Analysis shows that relocation of firm is very high rate and the reasons of relocation play compositeness role. The results of determinants of location, firms approach the established market area closely and the firm's relocation is influenced by market area.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Journal of Embryo Transfer
• /
• v.17 no.1
• /
• pp.79-85
• /
• 2002

The purpose of this study was to determine the effect of bST treatment on embryo recovery and pregnancy rate following embryo transfer. Donor cows were superovulated with Folltropin-V and PGF$_2$$\alpha$ combination method and then inseminated with frozen semen 3 times 12 hrs interval. Donor and recipient cows were assigned to control and bST group, of which was given a single injection of bST (500 mg, im) at insemination or estrus detection. Embryo collection of superovulated cows were flushed nonsurgical method at 7 to 8 days after artificial insemination. The percentare and Mean$\pm$S.E. of transferable embryo was not significantly different between control and bST treatment (72.8%/5.9$\pm$4.5 vs. 83.7%15.1 $\pm$ 1.6). The percentage and Mean$\pm$S.E. of transferable embryo in non-summer season was significantly higher than in summer (81.8%/5.4$\pm$2.1 vs. 68.7%14.774.6; P<0.05). The pregnancy rate after embryo transfer in bST treatment was significantly higher than in control (64.0 vs. 47.1%; P<0.05). There was no significant difference in pregnancy rate between summer and non-summer (51.6 vs. 61.5%; P>0.05). The results indicated that InST treatment in recipient cows could improve the efficiency of transferable embryo production and pregnancy rate after embryo transfer, and non-summer season may be better far superovulation treatment and embryo transfer.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.1-14
• /
• 1980

Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

• Resources Recycling
• /
• v.15 no.3 s.71
• /
• pp.38-45
• /
• 2006

The thermal filter press dewatering(TFPD) technology to improve the dewaterability through increasing the inner vapor pressure, lowering the filtration viscosity and forming the porosity easily within cake as applying the heat at the sludge layer was developed in this study. The hot water with temperature of $95^{\circ}C$ and pressure of $1.2kg_f/cm^2$ was supplied to the heating plate equipped between filter plates with plate size of $470{\times}470mm$ and material of polypropylene. Sludge was dewaterd by supplying pressure of $5kg_f/cm^2$ and then by squeezing pressure of $15kg_f/cm^2$. As a results of estimating the characteristics of thermal dewatering to consider the initial water content and organic content to be influenced by a period of water shortage and rainwater, the dewatered cake water content was about 35 wt% and dewatering velocity was $4DSkg/m^2{\cdot}hr$ under the rainwater period, and the dewatered cake water content was about 50 wt% and dewatering velocity was $1.5DSkg/m^2{\cdot}hr$ in the case of sludge of water shortage season. These results was superior to the mechanical dewatering performance with water content of 70wt% and dewatering velocity of $0.9DSkg/m^2{\cdot}hr$. On the base of the results of TFPD, energy consumpted to deal with DS(Dry Solid) of 1kg was estimated by 300 kJ. It was analyzed that the energy consumption of TFPD was decreased about one third with comparison to the dryer system. Dewatering velocity of this technology was faster than the one of mechanical dewatering equipment and it was easier to product low water content cake. Therefore, this technology was recognized that dewaterability was predominant because of the fast of dewatering velocity and production of low water content cake, and also this known as economical efficiency was excellent because of low energy consumption in comparison with dryer.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.109-124
• /
• 2014

In order to understand the carbon cycle in the Amundsen Sea of the Southern Ocean, the export fluxes of particulate organic carbon from the euphotic zone to deep water estimated using ${\psi}$/${\psi}$ disequilibrium method. Seawaters in 14 water columns were collected during February and March 2012, and analyzed for total and dissolved ${\psi}$, and particulate organic carbon. Total ${\psi}$ activities in the water column showed deficiency and excess relative to those of ${\psi}$ depending on the water depth. Deficiency of total ${\psi}$ in the euphotic zone showed mirror images both with chlorophyll-a and fluorescence, and was consistent with the loss of nitrate, which indicated the effect of biological activity. In addition, deficiency of total ${\psi}$ from deep water was associated with the increase of total dissolvable Fe/Mn concentration. Excess total ${\psi}$ activity presented below the euphotic zone might be related to particulate ${\psi}$ concentrated in this water depth. Mean export flux of ${\psi}$ estimated using the steady state model was $867{\pm}246dpmm^{-2}day^{-1}$. Mean export flux of particulate organic carbon, which were estimated by the product of total ${\psi}$ flux and ratio of POC/${\psi}$ ($7.08{\pm}4.27{\mu}molCdpm^{-1}$) in the sinking particles, was $5.9{\pm}3.9mmolCm^{-2}day^{-1}$. These fluxes were similar levels to those in the Weddell Sea during February and March 2008. Export ratios (ThE) relative to the primary production in the euphotic zone were in the range of 3-54% (av. 28%).

• Development and Reproduction
• /
• v.12 no.1
• /
• pp.87-95
• /
• 2008

Neural stem/precursor derived from pluripotent human embryonic stem cells (hESCs) has considerable therapeutic potential due to their ability to generate various neural cells which can be used in cell-replacement therapies for neurodegenerative diseases. However, production of neural cells from hESCs remains technically very difficult. Understanding neural-tube like rosette characteristic neural precursor cells from hESCs may provide useful information to increase the efficiency of hESC neural differentiation. Generally, neural rosettes were derived from differentiating hEBs in attached culture system, however this is time-consuming and complicated. Here, we examined if neural rosettes could be formed in suspension culture system by bypassing attachment requirement. First, we tested whether the size of hESC clumps affected the formation of human embryonic bodies (hEBs) and neural differentiation. We confirmed that hEBs derived from $500{\times}500\;{\mu}m$ square sized hESC clumps were effectively differentiated into neural lineage than those of the other sizes. To induce the rosette formation, regular size hEBs were derived by incubation of hESC clumps($500{\times}500\;{\mu}m$) in EB medium for 1 wk in a suspended condition on low attachment culture dish and further incubated for additional $1{\sim}2$ wks in neuroectodermal sphere(NES)-culture medium. We observed the neural tube-like rosette structure from hEBs after $7{\sim}10$ days of differentiation. Their identity as a neural precursor cells was assessed by measuring their expressions of neural precursor markers(Vimentin, Nestin, MSI1, MSI2, Prominin-1, Pax6, Sox1, N-cadherin, Otx2, and Tuj1) by RT-PCR and immunofluorescence staining. We also confirmed that neural rosettes could be terminally differentiated into mature neural cell types by additional incubation for $2{\sim}6$ wks with NES medium without growth factors. Neuronal(Tuj1, MAP2, GABA) and glial($S100{\beta}$ and GFAP) markers were highly expressed after $2{\sim}3$ and 4 wks of incubation, respectively. Expression of oligodendrocyte markers O1 and CNPase was significantly increased after $5{\sim}6$ wks of incubation. Our results demonstrate that rosette forming neural precursor cells could be successfully derived from suspension culture system and that will not only help us understand the neural differentiation process of hESCs but also simplify the derivation process of neural precursors from hESCs.