• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.979-984
• /
• 2017

Objective: An experiment was conducted to investigate the effect of dietary Ca concentrations in low non-phytate phosphorus (NPP) diets containing phytase on growth performance, bone mineralization, litter quality, and footpad dermatitis (FPD) incidence in growing broiler chickens. Methods: A total of 1,800 21-day-old Ross 308 growing broiler chickens were allotted to 1 of 6 dietary treatments with 6 replicated cages. Six diets were formulated to provide increasing Ca concentrations of 4.0, 5.0, 6.0, 7.0, 8.0, or 9.0 g/kg in diets. The concentrations of NPP in all diets were maintained at 3.0 g/kg, and phytase was supplemented to all diets at the level of 1,000 fytase units (FTU)/kg. At the end of the 14-d feeding trial, birds were euthanized for tibia sampling, and litter samples were collected from 3 areas in the cage. The FPD incidence was measured based on a 6-point scoring system. Results: Dietary Ca concentrations had no effect on growth performance of growing broiler chickens. However, a tendency (linear, p = 0.05) for decreased feed efficiency was observed as dietary Ca concentrations were increased. The concentrations of Ca and P in the tibia of broiler chickens increased (linear and quadratic, p<0.01) with increasing Ca concentrations in low NPP diets containing phytase. Litter pH, moisture, and N contents were not affected by increasing Ca concentrations in low NPP diets containing phytase. However, a tendency (quadratic, p = 0.10) for increased FPD incidence with increasing dietary Ca concentrations was observed. Conclusion: Dietary Ca concentrations from 4.0 to 9.0 g/kg in low NPP diets containing phytase have little effects on growth performance of growing broiler chickens. However, Ca and P concentrations in the tibia are decreased if dietary Ca concentrations are less than 5.0 g/kg. The FPD incidence for growing broiler chickens may be decreased if less than 9.0 g/kg of Ca is included in diets.

• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.1-9
• /
• 2020

In recent days, fuel cell has received attention from the world as an alternative power source to hydrocarbon used in automobile engines. With the industrial advances of fuel cell, There have been a lot of researches actively conducted to find a way of generating hydrogen. Among many hydrogen production methods, Solid Oxide Electrolysis Cell(SOEC) is not only a basic way but also environment-friendly method to produce hydrogen gas. Solid Oxide Electrolysis Cell has lower electrical energy demands and high thermal efficiency since it is possible to operate under high temperature and high pressure conditions. For these reasons, experimental researches as well as studies on numerical modeling for Solid Oxide Electrolysis Cell have been under way. However, studies on numerical modeling are relatively less enough than experimental accomplishments and have limited performance prediction, which mostly is considered as a result from inadequate effects of electrochemical properties by temperature and pressure. In this study, various experimental studies of commercial Membrane Electrode Assembly (MEA) composed of Ni-YSZ (40wt%, Ni-60 wt% YSZ)/8-YSZ (TOSOH, TZ8Y)/LSM (La_0.9Sr_0.1MnO₃) was utilized for improving effectiveness of SOEC model. After numerically analyzing effects of electrochemical properties according to operating temperature, causing the largest deviation between experiments and simulation are that Charge Transfer Coefficient (CTC), exchange current density, diffusion coefficient, electrical conductivity in SOEC. Analyzing temperature effect on parameter used in overpotential model is conducted for modeling of SOEC. cross-validation method is adopted for application of various MEA and evaluating feasibility of model. As a result, the study confirm that the numerical model of SOEC based on structured process of effectiveness evaluation makes performance prediction better.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.231-238
• /
• 2020

Strawberry (Fragaria × ananassa Duch.), a herbaceous perennial crop, is a popular fruit crop with high economical and nutritive values. This study was conducted to investigate the effect of the runner training angle (RTA) on the length of internodes and number of runners produced in strawberry 'Seolhyang' and 'Maehyang' in an attempt to achieve a higher production rate of runner plants and increase the propagation efficiency. Runners were trained for 30 days to grow at an angle of 0° (vertically upward), 45°, 90° (horizontal), 135°, or 180° (hanging down) from the upward vertical axis. The experiment was carried out in a glasshouse with 29/20℃ day/night temperatures, an average light intensity of 450 μmol·m^-2·s^-1 PPFD coming from the sun, and a natural photoperiod of 12 hours. For both 'Seolhyang' and 'Maehyang', the RTA affected number and length of runners, and number and fresh and dry weights of runner plants. Training at an angle of 135° or 180° shortened length of runners and internodes in 'Seolhyang'. These RTAs also produced runner plants with the lowest fresh and dry weights in both cultivars. The RTA did not affect the runner diameter, but affected the runner morphology in both cultivars. As compared to a RTA of 135°, a 180° RTA increased number of runner plants produced, making it the most proliferative RTA.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.698-705
• /
• 2017

Environmental impact of a mobile phone charger containing recycled plastic was quantified using LCA and the environmental benefits from the use of recycled and virgin plastic were compared. The assessment considers potential environmental impacts across the whole life cycle of the charger including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages and quantified six environmental impact categories; Abiotic depletion; Acidification; Eutrophication; Global warming; Ozone layer depletion; and Photochemical oxidants creation. The study showed that the environmental impacts of the use stage accounted for 94.4% and 70% in the resource depletion and global warming impact categories, respectively, and the environmental impacts of the pre - manufacturing stage accounted for more than 98% in the other impact categories. The main cause of the environmental impacts in the use stage was electricity consumed by the charger. The main cause in the pre-manufacturing stage was PBA (Printed Board Assembly) and external case manufacturing. In order to quantify the environmental benefits of recycled PC (Polycarbonate) in the exterior case, the environmental impacts of 1 kg production of recycled PC and virgin PC were evaluated. The environmental impact on the abiotic depletion of the recycled PC is estimated to be 30% compared to the virgin PC, and the impacts on the other impact categories of the recycled PC were less than 5% of the virgin plastic. Sensitivity analysis was performed for 12 items including site data and assumptions made. The sensitivity of each item was less than 10%. The results of this study confirm that designing compact and light PBA, improving charging efficiency, and use of recycled plastic are important design factors to reduce the environmental impact of a charger.

• Korean journal of communication and information
• /
• v.33
• /
• pp.169-191
• /
• 2006

Changing our monopoly broadcasting advertising system into free competition system may give rise to serious troubles that intensify commercialism of broadcasting and reduce diversity of public opinion. In the boundaries of public interest out of danger, korean broadcasting system should adopt a system that partially adopts the principle of free market. Broadcasting advertising sale system affect the whole broadcasting system because it functions as an effective capital-resource provider. Thus, it affects the broadcasting policies' righteousness and efficiency. Due to the non-elastic nature of the total advertising market, broadcasting advertising's size affects other media's capital allocation process. Therefore, broadcasting advertising sales system not only affects broadcast's social duty and public interest, but also affects the whole media industry. First, provide fair and open-competitive measures to support broadcast sales policy so that the market-based system can be run smoothly. Second, block any un-due influence from advertisers by separating production/programming and advertising sales. Third, sustain public broadcast system, not based on the advertising sales but based on the subscription fee. Fourth, social intervention of the advertising market. Fifth, provide policies that can set up multiple media channels/outlets and public opinion. By providing the minimum capital resources to the public broadcasting system, the broadcasting system can act on its public-interest duty and support the people's right-to-know rights.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.885-890
• /
• 2017

For the construction of the microbial monitoring method, anti-Salmonella polyclonal antibodies (pAbs) were produced from a rabbit and purified by saturated ammonium sulfate precipitation and protein A affinity column. The reactivity of anti-Salmonella pAbs was compared to that of commercial ones by using an indirect ELISA. The specificity of anti-Salmonella pAbs was investigated using 20 Salmonella serotypes and 20 non-Salmonella strains. A capturing ability of anti-Salmonella pAbs was investigated by exposing antibody-immobilized gold biosensor to different concentration of Salmonella mixture. Anti-Salmonella pAbs were successfully produced and purified with an antibody concentration of 2.0 mg/mL The reactivity of purified anti-Salmonella pAbs was greater than that of commercial one at all tested concentrations. All Salmonella serotypes, except S. Diarizonae, showed excellent binding efficiency with purified anti-Salmonella pAbs. Moreover, the purified anti-Salmonella pAbs showed excellent specificity against all non-Salmonella strains. The anti-Salmonella pAbs immobilized on the gold biosensor demonstrated the successful capturing capability against Salmonella with a dose-response manner. Therefore, the anti-Salmonella pAbs exhibited sufficient reactivity, specificity, as well as capturing capability against Salmonella to be considered as a bio-recognition element.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.6
• /
• pp.1056-1062
• /
• 2008

To evaluate the effect of irradiation on restructured pork jerky containing paprika and Japanese apricot extracts, the quality of protein was determined in vitro based on the formation of trypsin indigestible substrate inhibitor (TIS) and the computed protein efficiency ratio (C-PER) as determined based on the protein digestibility and amino acid analysis. In addition, we compared the effects of electron beam irradiation to those of gamma irradiation. Approximately 3% of the moisture content of pork jerky was reduced in response to irradiation with 3kGy administered using an electron beam however, no additional reduction was observed in samples that were subjected to higher doses of irradiation. In addition, there were no notable differences in the crude protein and fat content of pork jerky samples that were subjected to irradiation, regardless of dose. Furthermore, the total amino acids profiles did not change in response to electron beam irradiation. However, the in vitro protein digestibility increased by 7% in response to 3kGy of electron beam irradiation and 5kGy of gamma irradiation, but no significant changes in digestibility were not observed in response to treatment with higher doses. TIS quantified as trypsin inhibitors were formed in response to irradiation using the electron beam (3kGy) and gamma rays (5kGy), although there was a slight reduction in the production of TIS inhibitors in samples irradiated with higher doses. Moreover, only samples irradiated with 10kGy (electron beam and gamma ray) showed higher TBA values than those of the control samples. Finally, the C-PERs $(2.50{\sim}2.60)$ were greater in all of the irradiated pork jerky samples than in the control samples (2.22). Taken together, these results suggest that electron beam irradiation and the incorporation of extracts (paprika and Japanese apricot) may be useful methods of improving the nutritional quality of pork jerky.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.543-553
• /
• 2008

Shipbuilding is a kind of ETO(Engineering To Order) industry which designs and produces a product in accordance to various requirement of customers, rules and regulations. Recently, the number of ordered ships has been increased by up to two or three times in each domestic shipyards. Most shipyards have been adopted 3D ship CAD, ERP(Enterprise Resource Planning) and APS(Advanced Planning System) to get an efficient product development and manufacturing system. However, not only the effective operation of 3D ship CAD, ERP and APS but also the production efficiency can be achieved only if product information management which can manages the product data is implemented in an integrated environment. Present study has suggested a systematic approach to implement a PLM system to manage the product data in early design shipbuilding. Also, a prototype of PLM is implemented to manage the product data in a basic ship-design. In the prototype system, a product structure and architecture of PLM is considered.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.297-302
• /
• 1995

The experiment is conducted to reduce the labor and production cost with the labor save of harvest if cultivating the potatoes using the machine and the results are as follows. On labor saving effect in transparent vinyl mulching, digging working hours per 10a in the case of using tractor are 60 min., fixing + turning time is 5 min. and 30sec., the time of harvest is 65 min and 30sec., digging working hours using cultivator are 99 min. and fixing +turning time is 5 min. and 30sec., but the time of hand harvesting is 990 min. and in digging labor saving effect, tractor shows 94% in the harvesting period and harvest by cultivator 90%. On non mulching cases, the harvest by tractor takes 49 min. and 30 sec. and that by cultivator does 87 min. and 30 sec., and digging labor saving effect shows 94% in the tractor harvest and 90% in the cultivator harvest. Therefore, on the operation efficiency per hour, in the case of tractor with digger vinyl mulching and non mulching show, $0.091\sim0.121ha$ and in the case of cultivator with digger both show $0.057\sim0.069ha$, so in the mechanized harvest of potatoes, the harvest by tractor with digger is the best. On the cost and labor save for harvesting the potatoes with labor saving effect, tractor shows 19 hours and 20 min./10a in vinyl mulching and 19 hours. and 54 min./10a in non mulching, so it shows the short hours for harvesting. And labor saving effect shows $42\sim45%$ in comparison with 35 hours and 21 min. $\sim35$ hours and 23 min.($123,113\sim130,613$ won) of the hand harvest, so the cost was reduced to $71,250\sim72,225$ won. On the cultivator with diggers, vinyl mulching takes 19 hours and 55 min. and non mulching 19 hours and 38 min., so the labor saving effect and cost were reduced to $14\sim44%$ ($72,675\sim73,313$ won) in comparison with the hand harvest.

• Clean Technology
• /
• v.12 no.4
• /
• pp.250-258
• /
• 2006

CFC compounds such as CFC-113 and 1,1,1-TCE, etc. have been used in various industries due to their excellent chemical stability, thermodynamic characteristics, non-inflammability and anti-corrosiveness. However, in oder to protect the earth environment, "the Montreal Protocol on substances that deplete the ozone layer" was adopted in 1989 for prevention of production and utilization of these CFC compounds and alternative cleaning agent have been required in the industry. The objective of this study is to develop non-aqueous cleaning agents that do not require major change of cleaning system, have excellent cleaning efficiency, are favorable to the environment, are harmless to the human body, and are not generated corrosive materials. In this work, non-aqueous cleaning agents have been formulated with glycol ether series and paraffinic hydrocarbon series with siloxane, and their physical properties and cleaning efficiencies were analyzed and compared with those of regulated materials. As a result of physical properties measurement of the formulated cleaning agents, it is expected that they may have good penetration ability into contaminated materials due to their properties with low density and low surface tension. Measurement of flash point and vapor pressure of the cleaning agents will be helpful for evaluation of their safety and working environment. The experimental results of cleaning flux, solder and grease by the formulated cleaning agents show that their cleaning abilities of soils were good and that there were no residues on the substance after cleaning. Therefore, alternative cleaning agents which have equivalent cleaning ability to regulating materials, good penetration ability and low hazard to human body, have been developed in this work.