• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.379-387
• /
• 2017

Various sizes (0.2 ~ 1.2 mm) and developmental stages (referred to as Stage 1 ~ 3) of apical and lateral meristems were excised, together or separately, directly from dormant buds of apple 'Hongro'. They were mixed infected by Apple scar skin viroid (ASSVd), Apple chlorotic leaf spot virus (ACLSV), Apple stem pitting virus (ASPV) and Apple stem grooving virus (ASGV), which are major viruses attacking apples. A total of 31 callus lines (> 10 mm in diameter) were obtained by culturing the explants on Murashige and Skoog (MS) medium supplemented with 3% sucrose, 3.0 mg/L benzyladenine (BA) and 0.1 mg/L indole-3-butyric acid (IBA), and they were subjected to RT-PCR analysis for virus detection. A high rate of virus elimination (expressed as the percentage of calli that did not amplify during RT-PCR, i.e., RT-PCR negative calli per total number of calli obtained) was achieved for ACLSV (100%), ASSVd (93.7%), and ASPV (93.7%), whereas it was only 25.8% for ASGV. ASPV was detected in the presence of 2 ~ 3 bracts. Simultaneous virus elimination of ASSVd, ASPV, ACLSV, and ASGV occurred during the meristem culture, in which the early stages of the dormant buds (Stage 1) were used, because ASGV was mostly eliminated during that stage. The results of the present study will be valuable for the production of virus-free apple trees.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.49-57
• /
• 2003

Approx. 200.000 bpd vacuum residue oil is produced from oil refineries in Korea, and is supplied to use asphalt, high sulfur fuel oil and for upgrading at the residue hydro-desulfurization unit. Vacuum residue oil has high energy content, however its high sulfur content and high concentration of heavy metals represent improper low grade fuel. To meet growing demand for effective utilization of vacuum residue oil from refineries, recently some of the oil refinery industries in Korea, such as SK oil refinery and LG Caltex refinery, have already proceeded feasibility study to construct 435~500 MWe IGCC power plant and hydrogen production facilities. Recently, KIER (Korea Institute of Energy Research) are studying on the Vacuum Residue gasification process using an oxygen-blown entrained-flow gasifier. The experiment runs were evaluated under the reaction temperature: 1.100~l,25$0^{\circ}C$, reaction pressure: 1~6 kg/$\textrm{cm}^2$G, oxygen/V.R ratio: 0.8~0.9 and steam/V.R ratio: 0.4~0.5. Experimental results show the syngas composition (CO+H$_2$): 85~93%, syngas flow rate: 50~l10 Nm$^3$/hr, heating value: 2,300~3,000 k㎈/Nm$^3$, carbon conversion: 65~92, cold gas efficiency: 60~70%. Also equilibrium modeling was used to predict the vacuum residue gasification process and the predicted values were compared reasonably well with experimental data.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1496-1502
• /
• 2010

Two experiments were conducted to evaluate the effects of diet complexity and fermented soy protein on growth performance and amino acid digestibility. In Exp. 1, a total of 120 crossbred weanling pigs ($5.68{\pm}0.80\;kg$ BW) were randomly allocated into 4 treatments. Each treatment had 6 replicate pens comprising 5 pigs in each replicate. Experimental diets consisted of simple (soybean meal as protein source) and complex (soybean meal, rice protein concentrate, potato protein concentrate and fish meal as protein sources) diets; each diet contained 0 or 5% fermented soy protein (FSP), respectively. Dietary treatments included: i) simple diet; ii) simple diet with 5% FSP; iii) complex diet; iv) complex diet with 5% FSP. Pigs were provided each experimental diet for 20 d (phase 1) and then fed the same common diet for 10 d (phase 2). During days 0-10, pigs fed FSP diets had greater ADG than those fed non-FSP diets (p<0.05). G/F in FSP treatments was significantly higher than that in non-FSP treatments (p<0.05) from days 0 to 10. Throughout the overall period, G/F was greater in FSP treatments compared with non-FSP treatments (p<0.05). On d 10, N digestibility was higher in pigs fed FSP diets than in those fed non-FSP diets (p<0.05). Diet complexity did not affect growth performance and nutrient digestibility (p>0.05) in this experiment. In Exp 2, 12 ileal-cannulated, weanling barrows were housed in individual metabolism crates and randomly assigned to 1 of 4 treatments (same as Exp. 1) by using a $4{\times}4$ Latin square design. Among the essential amino acids, apparent ileal digestibility (AID) of Met and Val were increased in pigs fed FSP diets compared with those fed non-FSP diets (p<0.05). AID of Met, Phe and total essential amino acids were higher in pigs fed complex diets than in those fed simple diets (p<0.05). Among the non-essential amino acids, AID of Ala in FSP treatments was greater than that in non-FSP treatments (p<0.05). In addition, Asp, Cys, Glu, Pro, Ser and total non-essential amino acid digestibilities in pigs fed complex diets were higher compared with those fed simple diets (p<0.05). Interaction was observed in AID of Met, Asp and Pro. In conclusion, these results indicated that feeding of 5% FSP to nursery pigs improved feed efficiency and AID of amino acids, and diet complexity did not maximize the growth performance of pigs in the subsequent phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3802-3807
• /
• 2010

In most sports, a key evaluator of athletic performance is sprinting speed. There are two trainable factors associated with speed including mechanical efficiency and force production. The squat exercise is one of the beneficial exercises implemented to enhance lower extremity power for sprinters. However, there has been little research on the optimal exercise intensity for sprinting performance. This study was to investigate whether performing different squat exercises prior to a 40m sprint would improve running speed. Ten male high school sprinters performed six 40m sprints following the different squat intensities (30%, 50%, 70%, and 90% of 1RM). A one-way ANOVA with repeated measures revealed that 40m sprint times had significantly improved after 50% ($5.27{\pm}0.13$, p<0.0001) and 70% ($5.26{\pm}0.15$, p<0.0001) of 1RM squat exercises compared to sprint times not following a squat % ($5.33{\pm}0.16$). Performing squat exercises with intensities of 50% and 70% of 1RM may improve 40m sprint times. Therefore, it is suggested that coaches and sprinters could include a medium intensity squat exercise (70%) in the warm-up procedure in order to improve sprint performance.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.17-22
• /
• 2011

This study was designed to determine the effect of electric field strength, duration and fusion buffer in fusion parameters on the rate of membrane fusion between the somatic cell and cytoplast for Korean cattle (HanWoo) somatic cell nuclear transfer (SCNT) procedure. Following electrofusion, effect of 5 or $10\;{\mu}M$ $Ca^{2+}$-ionophore of activation treatment on subsequent development was also evaluated. Cell fusion rates were significantly increased from 23.1% at 20 V/mm to 59.7% at 26 V/mm and 52.9% at 27 V/mm (p<0.05). Due to higher cytoplasmic membrane rupture or cellular lysis, overall efficiency was decreased when the strength was increased to 30 V/mm (18.5%) and 40 V/mm (6.3%) and the fusion rate was also decreased when the strength was at 25 V/mm or below. The optimal duration of electric stimulation was significantly higher in $25\;{\mu}s$ than 20 and $30\;{\mu}s$ (18.5% versus 9.3% and 6.3%, respectively, p<0.05). Two nonelectrolyte fusion buffers, Zimmermann's (0.28 M sucrose) and 0.28 M mannitol solution for cell fusion, were used for donor cell and ooplast fusion and the fusion rate was significantly higher in Zimmermann's cell fusion buffer than in 0.28 M mannitol (91.1% versus 48.4%, respectively, p<0.05). The cleavage and blastocyst formation rates of SCNT bovine embryos activated by $5\;{\mu}M$ $Ca^{2+}$-ionophore was significantly higher than the rates of the embryos activated with $10\;{\mu}M$ of $Ca^{2+}$-ionophore (70.0% versus 42.9% and 22.5% versus 14.3%, respectively; p<0.05). This result is the reverse to that of parthenotes which shows significantly higher cleavage and blastocyst rates in $10\;{\mu}M$ $Ca^{2+}$-ionophore than $5\;{\mu}M$ counterpart (65.6% versus 40.3% and 19.5% versus 9.7%, respectively; p<0.05). In conclusion, SCNT couplet fusion by single pulse of 26 V/mm for $25\;{\mu}s$ in Zimmermann's fusion buffer followed by artificial activation with $5\;{\mu}M$ $Ca^{2+}$-ionophore are suggested as optimal fusion and activation methods in Korean cattle SCNT protocol.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.124-129
• /
• 1994

In order to investigate the possibility of fine-size cocoon production by the use of imidazole compound, Trifumin, the cocoon and cocoon filament qualities, dietary efficiency and fibroin component were examined. cocoon size, cocoon weight and cocoon shell weight of trimolter were smaller than those of tetramolter. Cocoon shell weight of trimolter was 58% and 26% of that of tetramolter in the 3rd instar treated larvae and in the 4th instar treated larvae, respectively. Amount of cocoon shell produced per 1g dry matter ingested was 94% and 85% of that of tetramolter in the 3rd instar treated larvae and in the 4th instar larvae, respectively. The effects of Trifumin on the reeling tests were different according to the stage of the treatment. When Trifumin was treated at the 3rd instar larvae, reelability of cocoon filament, amount of cocoon filament, size of cocoon filament, reelability percentage and raw silk percentage of cocoon were 100%, 60%, 60%, 97% and 90%, respectively. When Trifumin was treated at the 4th imstar larvae, most of reelability tests were inferior to those of the 3rd instar treated larvae, but reelavility percentage was increased 13%. The Trifumin treatment did not affect the electrophoretic patterns of cocoon fibroin.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.26-30
• /
• 2008

This study was carried out to develop artificial culture method of Grifola frondosa in polypropylene bag. To find out the favorable substrate formulation of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55 : 25 : 12 : 8) mixing ratio of oak sawdust, oak chip, dried bean-curd refuse and wheat bran showed the shortest time to complete the crop cycle and the highest yield (weight of fresh mushrooms harvested at maturity). Those physicochemical conditions were pH 4.3, 2.4% crude fat contents, 54.1% total carbon, 1.42% total nitrogen, 38.1 C/N ratio, 75.5% porosity and $0.21\;g/cm^3$ bulk density. Among the physicochemical factors, pH, crude fat and total nitrogen may affect mushroom yield. Therefore, development of favorable substrate would be benefit to increase production efficiency of G. frondosa, mushrooms and be commercial potential.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.159-167
• /
• 1997

To cope with the mass-production and supply of plug seedling, the supply of transplanters is necessary. In the study, a transplanting test was carried out to find the optimum working condition in the mechanizd transplantation and to acquire the basic data for the improvement of transplanters by the research and analysis of working capacity of the local manual transplanters. The size of hopper affected transplanting stand and rate. Re-irrigation was required for the transplanted seedlings because they wilt 1 day after the transplanting if soil compaction is incomplete. Consequently, back-forth-left-right compaction method was good for soil covering and compaction. It may be thought to increase the amount of irrigation water at the time of transplanting by double-irrigation mechanism, but it needs to increase the larger water tank which makes the operation uneasy. So, assuming the working model by 1 or 2 operators with the machine size as small as possible, it seemed that eliminating of automatic irrigation method was desirable in view of efficiency. Though semiautomatic transplanter needs some structural improvements, it seemed still suitable for transplanting of plug seedlings such as 45-day red pepper seedlings in 128-hole tray and 25-day Chinese cabbage seedling in 128-hole tray. If traveling speed of the transplanter is limited to less than 14 m/min, with the transplanting depth of 2~3cm and transplanting space of 30cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.648-654
• /
• 2018

Currently, the Defense Agency for Technology and Quality (DTaQ), which is responsible for the quality assurance of military supplies, divides munitions into four categories, in order to conduct its governmental quality assurance activities, including product examination, process review and system audit. However, these 4 categories may differ depending on the related organizations' (e.g. Defense Acquisition Program Administration, munitions manufacturing) military requirements. Therefore, in this study, appropriate classification criteria for munitions are suggested for the sake of the efficient procurement, production and quality assurance of military supplies. We investigated the item classification system of the Public Procurement Service, which is a similar organization to the DTaQ. We also compared the appropriate classification criteria with those of related organizations and identified the current status of munitions classification data according to the current standard. In addition, application samples are presented using the proposed quality assurance classification criteria. Finally, the classification criteria of military supplies proposed in this paper will contribute to improving the efficiency of government quality assurance activities.