• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.812-820
• /
• 2002

An experiment was conducted on 190 progeny (winter -74; summer -59; rainy -57) of 12 Grey Giant rabbits (10 female +2 males), to assess the effect of different seasons in a year, on their reproductive, growth and productive performances along with feed efficiency, under sub-temperate Himalayan conditions. The daily meteorological attributes recorded during winter (October to March), summer (April to June) and rainy (July to September) seasons, and analysed were minimum and maximum temperature, relative humidity and rainfall. Various biological parameters recorded were doe weights at mating and kindling, litter size at birth, litter weight at birth, kit mortality, litter size at weaning, litter weight at weaning, weekly body weight up to 98 d and weaner mortality. Individual weight gains, dressing percentages, meat weights, liver weights, raw-pelt weights, processed pelt weights and processed pelt areas at slaughter on d 84 and 98, respectively were also recorded. The feed and fodder compositions and their nutritive values during different seasons were also analysed. Average ambient temperature during winter, summer and rainy seasons were $13.2{\pm}2.8$, $22.4{\pm}3.7$ and $24.8{\pm}2.3^{\circ}C$, respectively. The average relative humidity and total rainfall for winter, summer and rainy seasons were $68.9{\pm}1.5$% and $48{\pm}26.6$mm, $66.3{\pm}4.8$% and $125.6{\pm}56.8$ mm, and $77.3{\pm}1.3$% and $116.3{\pm}90.4$ mm, respectively. The weight of doe at mating and kindling, litter size at birth, litter weight at birth and litter size at weaning were comparatively higher whereas litter weight at weaning was significantly (p<0.05) higher during winter as compared to summer and rainy seasons. The kit mortality was significantly (p<0.05) higher during winter while the weaner mortality was significantly (p<0.05) higher during rainy season. At 84 d, the live weight per doe, slaughter weight, dressing percentage and liver weight were significantly (p<0.05) higher during winter than summer and rainy. Similarly, the gain in weight and meat weight at 84 and 98 d were significantly (p<0.05) higher during winter. The weight of raw pelt and processed pelt were recorded significantly (p<0.05) higher during winter while no difference in the area of processed pelts during different seasons could be observed. No difference in the biological performance could be observed between sexes in any of the seasons. Roughage analysis revealed comparatively higher crude protein percent and lower crude fibre percent during summer and rainy seasons than in winter. The roughage dry matter intake was comparatively higher during summer and rainy seasons vis-a-vis constant amount of concentrate supplied during all the three seasons. The digestibilities of dry matter was significantly (p<0.05) lower, whereas that of crude fiber, acid detergent fibre and cellulose were negative during winter. Interestingly, the feed:gain was exceedingly well during winter than in other seasons and it is concluded that it was the best season for production of rabbits under sub-temperate Himalayan conditions.

• Journal of the Korean association of regional geographers
• /
• v.5 no.1
• /
• pp.101-120
• /
• 1999

The purpose of this study is to analyze the impact of agricultural polices on the change of regional structure based on the specialization during the productivism period. Analysis are carried on through the comparison of distribution in 1950s and 1997. Since the 1950s, governmental policy has played a leading role in shaping the pattern of farming in Great Britain. The range of British measures have also been employed in an attempt to improve the efficiency of agriculture and raise farm income. Three fairly distinct phase can be identified in the developing relationship between government policies and British agriculture in the postwar period. In the 1st phase, The Agricultural Act of 1947 laid the foundations for agricultural productivism in Great Britain until membership of the EC. This was to be achieved through the system of price support and guaranteed prices and the means of a series of grants and subsidies. Guaranteed prices encouraged farmenrs to intensify production and specialize in either cereal farming or milk-beef enterprise. The former favoured eastern areas, whereas the latter favoured western areas. Various grants and subsidies were made available to farmers during this period, again as a way of increasing efficiency and farm incomes. Many policies, such as Calf Subsidy and the Ploughing Grant, Hill cow and Hill Sheep Schemes and the Hill Farming and Livestock Rearing Grant was provided. Some of these policies favoured western uplands, whilst the others was biased towards the Lake District. Concentration of farms occured especially in near the London Metropolitan Area and south part of Scotland. In the 2nd stage after the membership of EC, very high guaranteed price created a relatively risk-free environment, so farmers intensified production and levels of self-sufficiency for most agriculture risen considerably. As farmers were being paid high prices for as much as they could produce, the policy favoured areas of larger-scale farming in eastern Britain. As a result of increasing regional disparities in agriculture, the CAP became more geographically sensitive in 1975 with the setting up of the Less Favoured Areas(LFAs). But they are biased towards the larger farms, because such farms have more crops and/or livestock, but small farms with low incomes are in most need of support. Specialization of cereals such wheat and barely was occured, but these two cereal crops have experienced rather different trend since 1950s. Under the CAP, farmers have been paid higher guaranteed prices for wheat than for barely because of the relative shortage of wheat in the EC. And more barely were cultivated as feedstuffs for livestock by home-grown cereals. In the 1950s dairying was already declining in what was to become the arable areas of southern and eastern England. By the mid-1980s, the pastral core had maintained its dominance, but the pastoral periphery had easily surpassed arable England as the second most important dairying district. Pig farming had become increasingly concentrated in intensive units in the main cereal areas of eastern England. These results show that the measure of agricultural policy induced the concentration and specialization implicitly. Measures for increasing demand, reducing supply or raising farm incomes are favoured by large scale farming. And price support induced specialization of farming. And technology for specialization are diffused and induced geographical specialization. This is the process of change of regional structure through the specialization.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.715-721
• /
• 2007

Residual calcium concentration is high, in general, at the effluent of the fluoride removal process in the electronics industry manufacturing semiconductor and LCD. To increase the stability of the membrane process incorporated for reuse of wastewater, the residual calcium is required to be pre-removed. Hyperkinetic Vortex Crystallization(HVC) process was installed in the electronics industry manufecturing semi conductor as a pilot scale for accelerating calcification of calcium ion. Compared to the conventional soda ash method, the 31% higher calcium removal efficiency was achieved when HVC was applied at the same sodium carbonate dosage. In order to maintain the economic calcium removal target of 70% preset by manufacturer, the dosing concentration of the soda ash was 530 mg/L based on influent flowrate. The seed concentration in the reactor was one of the critical factors and should be maintained in the range of $800\sim1,200mg$ SS/L to maximize the calcium removal efficiency. The calcite production rate was 0.30 g SS/g $Na_2CO_3$ in the average. The economic HVC passing time of the mixture was in the range of $2\sim5$ times. Relatively, stable calcium concentration was maintained in the range of $30\sim72$ mg/L(average 49 mg/L) although the calcium concentration in the feed was severely fluctuated with $74\sim359$ mg/L(average 173 mg/L). The HVC process was characterized as environment-friendly technology reducing chemical dosage and chemical sludge production and minimizing maintenance cost.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.797-806
• /
• 2000

The objectives were to compare the biodegradable threshold concentrations of phenol with the different composition of the influent carbon source and examine the SMA (Specific Methanogenic Activity)and the possibility of simultaneous removal of high-strength organics and nitrogen compounds in UASB(Upflow Anaerobic Sludge Blanket) - PBR(Packed Bed Reactor) process. The results showed that UASB reactors were efficient to remove phenol and phenol + glucose from synthetic wastewater. At phenol conc, of 600 mg/L and SCOD conc. of 2100 mg/L in UASB reactor(with only phenol as substrate), the removal efficiencies of phenol and SCOD were over 99% and 93% respectively, under MLVSS of 20 g. The activity of microorganism was $0.112g\;phenol/g\;VSS{\cdot}d$, $0.351g\;SCOD/g\;VSS{\cdot}d$. The gas production rate was $0.115L/g\;VSS{\cdot}d$ and $CH_4$ content in gas was about 70%. At phenol conc. of 760 mg/L and SCOD conc. of 4300 mg/L in UASB reactor( with phenol + glucose as substrates), the removal efficiencies of phenol and of SCOD were over 99% and 90% respectively, under MLVSS of 20 g. The activity of microoganism was $0.135g\;phenol/g\;VSS{\cdot}d$, $0.696g\;SCOD/g\;VSS{\cdot}d$. The gas production rate was $0.257L/g\;VSS{\cdot}d$ and $CH_4$ content in gas was about 70%. Serum bottle test showed that the activity of granule was inhibited over 1600 mg/L phenol conc, and denitrification and methanogenesis simultaneously took place in UASB granules under co-substrates conditions. PBR reactor packed with cilium type media, was efficient in nitrification. In condition of $0.038kg\;NH_4-N/m^3-media{\cdot}d$. 10~12 mg/L phenol conc. and 200~500 mg/L SCOD conc., nitrification efficiency was over 90% and phenol removal efficiency was over 98%.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2020

Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.1059-1075
• /
• 2017

The objective of this study was to evaluate the freezing and thawing resistance of the existing drainage system for leakage treatment of underground concrete structures operating in cold regions. The freezing and thawing test was conducted on 4 types of drainage system specimens to evaluate the freezing and thawing resistance of the drainage system. The freezing and thawing resistance was evaluated on 4 types of Hotty-gel, as a waterproofing material, connection methods and on two methods to fix the drainage board with Hotty-gel on the surface of cement concrete specimen. One cycle of the freeze-thaw testing was 48 hours (24 hours of freezing and 24 hours of thawing), and the temperatures of freezing and thawing were at $-18^{\circ}C$ and $10^{\circ}C$, respectively. Among the 4 types of Hotty-gel connection methods, leakage occurred after 28 cycles (8 weeks) of freeze-thawing only in the Hotty-gel connection method with the 'V' groove applied to the corner of the drainage board. No leakage occurred in the 3 types of Hotty-gel connection methods. In two fixing methods, leakage occurred in the method of fixing the drainage board on the cement concrete specimen using the washer, screw and plastic wall plug. Leakage occurred at one point after 10 cycles (3 weeks) of freezing and thawing. After 28 cycles (8 weeks) of freezing and thawing, leakage point increased to 5 points. As time passed, the leak point was not increased, but the amount of leakage was increased at each leak point. The Hotty-gel connection method with cross-sectional diagonal shape was evaluated to be the highest in the production efficiency considering the production time and manufacturing method of the Hotty-gel connection shape. In the construction efficiency considering the construction time and construction method, the fixing method of air nailer, fixed nail and washer was superior to that of the washer, screw and plastic wall plug.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.395-400
• /
• 1983

The experiment was conducted to study the effect of protein level on weight gain, feed consumption and the efficiencies of feed, energy and protein when the broiler chick was fed the diet of different protein level with the iso-calorie content. The energy and protein level of the basal ration was 3200 kcal and 22.85% for starter period and 3265 Kcal and 18.58% for finisher period, respectively. In order to increase the protein level of the experimental diet, the basal diet was substituted by fish meal by the ratio of 3, 6, 9, and 12%. The male Abor Acre broiler chicks were employed for 8 weeks and the result obtained were as follows. 1. The weekly body weight gain was significantly greater for Diet C than for Diet A and E in the starter period and greater for Diet A than for Diet E in the finisher period (P<0.05). 2. In stater period the feed intake was not affected by the protein level but in finisher period the feed intake for Diet C, D, and E was significantly reduced compared with Diet A. 3. As for feed conversion ratio, Diet C of 1.43 was improved significantly compared with Diet A of 1.58(P<0.05). 4. As the protein level of diet increased, the energy efficiency ratio increased and however, the protein efficiency ratio decreased in starter and finisher period. In conclusion the best performance of broiler is thought to be realized when the protein and energy level was 23% and 3200 Kcal for starter period and 20% and 3250 Kcal for finisher period, respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2019

In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.3
• /
• pp.166-172
• /
• 2019

BACKGROUND: Increase in the ratio of small berries in blueberry production decreases the farmers' profits due to weakening market competitiveness and lowering harvest efficiency. One of the reasons for increased small berries is over fruit-load. For improving productivity and competitiveness of blueberry in Korea, hand-thinning can be applied to increase fruit quality before the developing adequate chemical thinning methods. This study was conducted to investigate the proper timing and methods for floral buds thinning in rabbiteye blueberry. METHODS AND RESULTS: Eight years old bushes of rabbiteye bluberries 'Brightwell' as a primary cultivar and 'Powderblue' as a pollinizer were used for this study. Fruit size distribution by leaf-to-fruit ratio was investigated by counting the number of leaves and fruits in canes of 127 'Brightwell' plants whose fruit set varied. Fifty percent of flowers/floral buds were removed in four different floral buds stages such as bud swell, late pink bud, full bloom, and petal fall, and the consumed time for thinning and fruit characteristics were recorded to investigate the effect and proper timing of floral buds thinning. Fruit weight and soluble solids content tended to increase in proportion to leaf-to-fruit ratio and the production of the number of fruits less than 13 mm in diameter decreased when leaf-to-fruit ratio was more than 2.5. Manual floral buds thinning by hands was fastest in full bloom stage and slowest in bud swelling stage. In all cultivars, fruit size was significantly smaller in non-thinning treatment than thinning, and there was, however, no significant difference in total fruit yield. The number of fruits less than 13 mm in diameter increased in both cultivars as floral buds thinning was delayed. Consumed time for picking 90% berries out of total berries per bush was shortest in full bloom stage thinning in 'Brightwell' and bud swelling, full bloom thinning in 'Powderblue'. These were 25 and 20 days faster than no thinning, respectively. CONCLUSION: Although the effect of floral buds thinning varied depending on the cultivars, our results confirmed that floral buds thinning was effective for the early intensive harvesting and the increase of the large fruit ratio and the harvesting productivity. Also, in order to increase thinning efficiency, it is recommended to remove the flower buds before the full bloom stage.

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.1
• /
• pp.109-130
• /
• 2022

The Vietnamese government has proposed contract farming through a new type of cooperative as an institutional innovation which aims to restructure the agricultural sector. However, policy changes often impact farmers, who bear the primary effects of the transition process. Understanding households' strategies for land use and livelihood is crucial for policymaking in the agricultural development field. This study was conducted in the rural Binh Dao commune in Central Vietnam. We analyzed household members' labor force changes and their livelihood behaviors after their participation in a contract farming scheme using qualitative analysis methods combined with geographic information system (GIS) support, based on secondary data and in-depth interviews of 190 farmers. Simultaneously, we created a digital map of the cooperative's production area to investigate changes in land use and production activities. The findings show that contract farming shaped the vertical coordination of the value chain from the farmers to the cooperative and agricultural product trading companies. Subsequently, it encouraged land use and labor efficiency due to mechanical support. In addition, it also increased productivity and protected farmers from market risks. However, despite its positive effects on agricultural productivity in this case, the contract farming scheme could not achieve the restructuring of the rural labor force toward non-agricultural sectors. Ironically, farmers in the Binh Dao commune tended to increase cultivable land during the agricultural restructuring program, rather than switching their labor forces to non-agricultural sectors. The lack of stable non-farming job opportunities in rural Vietnam results in challenges to the efficiency of agricultural restructuring programs. Consequently, farmers in the Binh Dao commune are still smallholder farmers, depending on the family labor force.