• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1031-1040
• /
• 2024

Objective: This study aimed to evaluate the effect of feeding milk replacer (MR) with varying levels of lactose and the increased supply of total solids (from 750 to 960 g/d) on performance, blood metabolites, and health of Holstein male calves during the preweaning period. Methods: Forty newborn Holstein calves (10 per treatment) were blocked according to birth weight and date of birth and distributed in a randomized block design to different liquid diets: Whole milk powder (WMP) diluted to 125 g/L solids; MR with 48% lactose (48L), diluted to 125 g/L solids; MR with 53% lactose (53L), diluted to 125 g/L solids; 53L MR corrected to 160 g/L solids (16TS) by the inclusion of a solid corrector. Calves were individually housed in wood hutches, fed 6 L/d of the liquid diet, and had free water and starter concentrate access. The study lasted 56 days. Results: Liquid diet intake was higher for calves fed 16TS than for other treatments. Calves fed 16TS presented higher protein and fat intake, followed by those fed WMP and the 48L or 53L MRs. Lactose intake was higher for 16TS-fed calves, followed by 53L, 48L, and WMP-fed calves. Starter and total dry matter intake did not differ among liquid diets. The average daily gain was higher for 16TS than 48L-fed calves, with the other treatments being intermediary. The lowest feed efficiency was observed for calves fed 48L. No effects on health were observed, as well as on selected blood metabolites, except for albumin concentration, which was higher for calves fed 16TS and WMP. Conclusion: Higher total solids content (160 g/L) in MR increases nutrient intake and consequently improves the performance of dairy calves. Feeding MRs with levels of lactose up to 53% of the DM had no deleterious effect on the performance or health of the calves.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.3
• /
• pp.275-284
• /
• 2024

Worldwide, cardiovascular disease is the main cause of death, which accordingly increased by hyperlipidemia. Hyperlipidemia therapy can include lifestyle changes and medications to control cholesterol levels. Statins are the medications of the first choice for dealing with lipid abnormalities. Rosuvastatin founds to control high lipid levels by hindering liver production of cholesterol and to achieve the targeted levels of low-density lipoprotein cholesterol, another lipid lowering agents named ezetimibe may be used as an added therapy. Both rosuvastatin and ezetimibe have low bioavailability which will stand as barrier to decrease cholesterol levels, because of such depictions, formulations of this combined therapy in nanotechnology will be of a great assistance. Our study demonstrated preparations of nanoparticles of this combined therapy, showing their physical characterizations, and examined their behavior in laboratory conditions and vivo habitation. The mean particle size was uniform, polydispersity index and zeta potential of formulations were found to be in the ranges of (0.181-0.72) and (-13.4 to -6.24), respectively. Acceptable limits of entrapment efficiency were affirmed with appearance of spherical and uniform nanoparticles. In vitro testing showed a sustained release of drug exceeded 90% over 24 h. In vivo study revealed an enhanced dissolution and bioavailability from loaded nanoparticles, which was evidenced by calculated pharmacokinetic parameters using triton for hyperlipidemia induction. Stability studies were performed and assured that the formulations are kept the same up to one month. Therefore, nano formulations is a suitable transporter for combined therapy of rosuvastatin and ezetimibe with improvement in their dissolution and bioavailability.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.43-56
• /
• 2024

Purpose: The injection molding process, crucial for plastic shaping, encounters difficulties in sustaining product quality when replacing injection machines. Variations in machine types and outputs between different production lines or factories increase the risk of quality deterioration. In response, the study aims to develop a system that optimally adjusts conditions during the replacement of injection machines linked to molds. Methods: Utilizing a dataset of 12 injection process variables and 52 corresponding sensor variables, a predictive model is crafted using Decision Tree, Random Forest, and XGBoost. Model evaluation is conducted using an 80% training data and a 20% test data split. The dependent variable, classified into five characteristics based on temperature and pressure, guides the prediction model. Bayesian optimization, integrated into the selected model, determines optimal values for process variables during the replacement of injection machines. The iterative convergence of sensor prediction values to the optimum range is visually confirmed, aligning them with the target range. Experimental results validate the proposed approach. Results: Post-experiment analysis indicates the superiority of the XGBoost model across all five characteristics, achieving a combined high performance of 0.81 and a Mean Absolute Error (MAE) of 0.77. The study introduces a method for optimizing initial conditions in the injection process during machine replacement, utilizing Bayesian optimization. This streamlined approach reduces both time and costs, thereby enhancing process efficiency. Conclusion: This research contributes practical insights to the optimization literature, offering valuable guidance for industries seeking streamlined and cost-effective methods for machine replacement in injection molding.

• Korean Journal of Poultry Science
• /
• v.40 no.1
• /
• pp.41-47
• /
• 2013

This work was carried out to investigate performance and carcass yield of large-type broiler females at different stocking densities. Chicks (n = 492; 1-day-old; female; Arbor Acre broiler) were reared for six weeks (starter, 0~1 wk; earlier, 1~3 wk; finisher, 3~6 wk) and randomly divided into 3 treatments (4 replications/treatment, 36, 41 or 46 birds/replication). Treatments were T1 (10.9 birds/$m^2$), T2 (12.4 birds/$m^2$) and T3 (13.9 birds/$m^2$) by the stocking densities. Research indexes were livability, body weight, body weight gain, feed intake, feed conversion ratio, production efficiency factor, carcass yield and primal cuts ratio (wing, leg, back, breast and neck). Livability (%) was 90% or more for all treatments, but there was no significant difference on weekly livability (%). Body weight of T3 treatment were the lowest at 3 wk and body weight gain, feed intake, and feed conversion ratio were the lowest at 2~3 wk (P<0.05). Production efficiency factors of T1, T2 and T3 were 331.0, 340.8 and 336.0, respectively, and there was no significant difference among treatments. Leg meat ratio of T2 treatment was higher compared to other treatments at the age of 4 wk (P<0.05). Carcass yield of T1 treatment was the highest as 76.2% at the age of 5 wk (P<0.05). However, there was no significant difference on carcass ratio and partial meat ratio among treatments at the age of 6 wk. This result may provide the standard data of different stocking densities for heavy female broilers.

• Journal of the Korean Geographical Society
• /
• v.38 no.3
• /
• pp.400-412
• /
• 2003

It is now widely recognized that new Information and Communication Technologies (ICTs) have been changing the way tv which firms conduct their businesses. Examples are the application of enterprise resources planning (ERP) and business process reengineering (BPR) to increase the efficiency of internal resources management, adoption of Business-to-Business e-commerce (B2B e-com) to integrate supply chain, and invention of new marketing channels such as Business-to-Customer (B2C) e-com. These new ways of conducting businesses are believed to help firms to reduce transaction costs and increase productivity. As a result, new ICTs have played an important role in recent growth of many small firms into multi-functional and multi-product corporations and in their spatial expansion towards internationalization as well. This paper takes Haier in China as a case to study the role of new ICTs in the growth of firms and reveal how the new technologies have facilitated the expansion of Haier into a transnational corporation (TNC) by examining the internationalization process of the firm in relation to its adoption of new ICTs in the period from 1990 to 2002. The study reveals that the adoption of new Ins has helped Haier to integrate its functional units located in dozens of places across the world, which is essential to the internationalization of a firm, and to link closely together its worldwide suppliers and customers to achieve just-in-time (JIT) production and delivery. As such, the authors of the paper argue that, without the facilitation of new ICTS, Haier could not have developed into a TNC in less than ten years.It is now widely recognized that new Information and Communication Technologies (ICTs) have been changing the way tv which firms conduct their businesses. Examples are the application of enterprise resources planning (ERP) and business process reengineering (BPR) to increase the efficiency of internal resources management, adoption of Business-to-Business e-commerce (B2B e-com) to integrate supply chain, and invention of new marketing channels such as Business-to-Customer (B2C) e-com. These new ways of conducting businesses are believed to help firms to reduce transaction costs and increase productivity. As a result, new ICTs have played an important role in recent growth of many small firms into multi-functional and multi-product corporations and in their spatial expansion towards internationalization as well. This paper takes Haier in China as a case to study the role of new ICTs in the growth of firms and reveal how the new technologies have facilitated the expansion of Haier into a transnational corporation (TNC) by examining the internationalization process of the firm in relation to its adoption of new ICTs in the period from 1990 to 2002. The study reveals that the adoption of new Ins has helped Haier to integrate its functional units located in dozens of places across the world, which is essential to the internationalization of a firm, and to link closely together its worldwide suppliers and customers to achieve just-in-time (JIT) production and delivery. As such, the authors of the paper argue that, without the facilitation of new ICTS, Haier could not have developed into a TNC in less than ten years.

• Korean Journal of Poultry Science
• /
• v.15 no.3
• /
• pp.211-218
• /
• 1988

Data on egg number from time of first lay to 71 week of age were obtained from samples of single comb white leghorn breeder and brown layer breeder populations which were raised at manny breeding Co. These data were used to estimate the heritabilities of age at sexual maturity, early egg number, residual egg number and annual egg number. Also, the genetic correlation coefficients between these traits were estimated and selection efficiencies of each segment in early part record were estimated by use of the heritabilities and generic correlations. The estimated heritabilities and standard errors in two lines(W and B) were $0.30\pm0.07$ and $0.33\pm0.08$ at early records, $0.19\pm0.06$ and $0.18\pm$0.05 at residual records and $0.37\pm0.09$ and $0.49\pm0.10$ at time of first lay. Those at annual records were $0.24\pm0.06$ equally. The estimated correlation coefficients and standard errors between early record and annual record were $0.76\pm0.08$ and $0.77\pm0.07$. Those between early record and residual record were $0.46\pm0.15$ and $0.39\pm0.16$ respectively. At improving annual egg production per year, selection based on early part record(SM to 40 week of age) would be 69% more efficient than on annual record in line W and 80% more efficient than on annual record in line B. But, if it were considered that egg weight decreased due to sexual maturity and cost for data collection, use of selected segment from 35~40week of age in line W and from 31~40 week of age in line B would be desired in spite of a. small loss in relative selection efficiency. The generation interval would not be shortened.

• Journal of Applied Biological Chemistry
• /
• v.52 no.2
• /
• pp.77-83
• /
• 2009

This study was conducted to investigate the effect of the fermentation broth of fruits and vegetables and various kinds of lactobacillus containing in the broth on anti-microbial activity, anti-acidity, its organic acid concentrations and deorderization. In addition, the quality of eggs laid from the hens supplemented with the fermentation broth was determined. The fermentation broth contained over 8 kinds of lactobacillus and other microbes. Lactobacillus (L.) hilgardii, L. reuteri, L. nagelii, L. plantarum, and Zygosaccharomyces bisporus were survived especially in pH 2.0 among them. The concentrations of acetic acid and lactic acid in the broth were higher than minimum inhibitory concentration values (MIC) to Escherichia (E.) coli and Salmonella sp. Overall the broth contained sufficient organic acid to inhibit the growth of E. coli and Salmonella sp. In addition, L. nagelii and L. plantarum had the greatest anti-microbial activity against E. coli, Salmonella (S.) typhimurium, Staphylococcus aureus and S. gallinarium among lactobacillus in the broth. The broth had greater anti-microbial activity than individual lactobacillus. The fermentation broth had deodorization capacity of ammonia and hydrogen sulfate and the 50% of their concentrations were removed after 30 min treatment. Egg production rates, egg weight, and feed efficiency were increased in eggs laid from hens that supplemented with 0.1 % fermented broth compared to the control. The supplementation also increased the thickness and strength of egg shell to reduce broken eggs and decreased cholesterol levels in egg yolk. In conclusion, the fermentation broth of fruits and vegetables can be a natural alternative supplementation of feed in laying hens.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.252-252
• /
• 2017

Nowadays water shortage is becoming one of the biggest problems in the Korea. Many different methods are developed for conservation of water. Soil water management has become the most indispensable factor for augmenting the crop productivity especially on soybean (Glycine max L.) because of their high susceptibility to both water stress and water logging at various growth stages. The farmers have been using irrigation techniques through manual control which farmers irrigate lands at regular intervals. Automatic irrigation systems are convenient, especially for those who need to travel. If automatic irrigation systems are installed and programmed properly, they can even save you money and help in water conservation. Automatic irrigation systems can be programmed to provide automatic irrigation to the plants which helps in saving money and water and to discharge more precise amounts of water in a targeted area, which promotes water conservation. The objective of this study was to determine the possible effect of automatic irrigation systems based on soil moisture on soybean growth. This experiment was conducted on an upland field with sandy loam soils in Department of Southern Area Crop, NICS, RDA. The study had three different irrigation methods; sprinkle irrigation (SI), surface drip irrigation (SDI) and fountain irrigation (FI). SI was installed at spacing of $7{\times}7m$ and $1.8m^3/hr$ as square for per irrigation plot, a lateral pipe of SDI was laid down to 1.2 m row spacing with $2.3L\;h^{-1}$ discharge rate, the distance between laterals was 20 cm spacing between drippers and FI was laid down in 3m interval as square for per irrigation plot. Soybean (Daewon) cultivar was sown in the June $20^{th}$, 2016, planted in 2 rows of apart in 1.2 m wide rows and distance between hills was 20 cm. All agronomic practices were done as the recommended cultivation. This automatic irrigation system had valves to turn irrigation on/off easily by automated controller, solenoids and moisture sensor which were set the reference level as available soil moisture levels of 30% at 10cm depth. The efficiency of applied irrigation was obtained by dividing the total water stored in the effective root zone to the applied irrigation water. Results showed that seasonal applied irrigation water amounts were $60.4ton\;10a^{-1}$ (SI), $47.3ton\;10a^{-1}$ (SDI) and $92.6 ton\;10a^{-1}$ (FI), respectively. The most significant advantage of SDI system was that water was supplied near the root zone of plants drip by drip. This system saved a large quantity of water by 27.5% and 95.6% compared to SI, FI system. The average soybean yield was significantly affected by different irrigation methods. The soybean yield by different irrigation methods were $309.7kg\;10a^{-1}$ from SDI $282.2kg\;10a^{-1}$ from SI, $289.4kg\;10a^{-1}$ from FI, and $206.3kg\;10a^{-1}$ from control, respectively. SDI resulted in increase of soybean yield by 50.1%, 7.0% 9.8% compared to non-irrigation (control), FI and SI, respectively. Therefore, the automatic irrigation system supplied water only when the soil moisture in the soil went below the reference. Due to the direct transfer of water to the roots water conservation took place and also helped to maintain the moisture to soil ratio at the root zone constant. Thus the system is efficient and compatible to changing environment. The automatic irrigation system provides with several benefits and can operate with less manpower. In conclusion, improving automatic irrigation system can contribute greatly to reducing production costs of crops and making the industry more competitive and sustainable.

• Journal of Embryo Transfer
• /
• v.19 no.3
• /
• pp.245-255
• /
• 2004

In recent years, an increasing number of studies on pig in vitro maturation(IVM) and in vitro fertilization(IVF) have been separated. the wide range of new technologies, including that in applied molecular genetics, has increased this interest. the production of viable porcine embryos in vitro is a prerequisites for the successful production of transgenic pigs to date. The efficiency of IVM/IVF techniques in the porcine is lower than that obtained in other species such as cattle and mouse. The several problems are generally thought to be the cause of poor results: the low rate of MPN formation derived from inadequate IVM of oocytes, the high incidence of polyspermy after IVF and cell blocking at 4 cell during embryos culture. For there reasons overcoming, many studies have been conducted to improve in vitro embryo-genic competence of oocytes. In the last several years, many maturation culture media have been evaluated and various exogenous factors such as hormones and grows factors have been tested to improve the efficiency of porcine in vitro system. In the study several antioxidants have been examined to improve in vitro fertilization and development of porcine oocytes. In this study, several antioxidants were examined to determine the effects on the development of oocytes to the cleavage, morula and blastocyst stage when added at the maturation(IVM) or in vitro fertilization(IVF) or in vitro culture(IVC) of porcine embryos. Porcine oocytes were matured, fertilized and embryos were cultured in defind conditioned medium in vitro with or without supplementation with the antioxidents of cysteine, catalase and glutathione. 1. Significant improvement of blastocyst rate (27.2％ versus 15.4％, p<0.05) were achieved when catalase(500U/$m\ell$) were added to TCM-199 medium and morula rate(72.0％ versus 53.9％, p<0.05) were significantly higher when glutathione(1.0mM/$m\ell$) were added to TCM-199 medium than those of control. 2. In mTBM medium for oocytes fertilization, the addition of cysteine, catalase and glutathione had no positive effect on embryonic development. glutathione had no positive effect on embryonic development. In conclusion, this study shows that addition of catalase, gluththione during IVM improved the rate of porcine embryo development.

• Korean Journal of Weed Science
• /
• v.30 no.4
• /
• pp.330-339
• /
• 2010

In order to suggest correct direction of researches on Miscanthus spp. which are promising bioenergy crop, authors had reviewed and summarized various literature about botanical taxonomy, morphology and present condition of breeding, cultivation and utilization of miscanthus. Among the genus of Miscanthus which are known 17 species, the most important species are M. sinensis and M. sacchariflorus which origin are East Asia including Korea, and M. x giganteus which is inter-specific hybrid of tetraploid M. sacchariflorus and diploid M. sinensis. Miscanthus is superior to other energy crops in resistance to poor environments including cold, saline and damp soil, nitrogen utilization efficiency, budget of input energy and carbon which are required for producing biomass and output which are stored in biomass. The major species for production of energy and industrial products including construction material in Europe, USA and Canada is M. x giganteus which was introduced from Japan in 1930s. In present, many breeding programs are conducted to supplement demerits of present varieties and to develop "Miscanes" which is hybrid of miscanthus and sugar cane. In Korea, the researches on breeding and cultivation of miscanthus were initiated in 2007 by collecting germplasms, and developed "Goedae-Uksae 1" which is high biomass yield and "mass propagation method of miscanthus" which can improve propagation efficiency in 2009. In order to develop "Korean miscanthus industry" in future, the superior varieties available not only domestic but also foreign market should be developed by new breeding method including molecular markers. Researches on production process of cellulosic bio-ethanol including pre-treatment and saccharification of miscanthus biomass also should be strengthen.