• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.55-60
• /
• 2016

This study was developed through the secondary battery module charging/discharger possible utilization in the production process equipment circuit. The developed module is ensuring construction of efficient and productive charging and discharger through this research a limit on the yield and the price of existing single -channel charge and discharger circuit as a 5V 70A grade secondary battery Formation charge and discharger for up to 1 board 4 channels. In order to improve the sensing accuracy, through a robust differential amplifier circuit described using 16bit Analog-Digital Converter and noise was secured 16bit resolution sensing. The configuration also made demands for property Rise / Fall Time. Data Acquisition, discharge efficiency and also to fit the sink circuit temperature level for mass production.

• Journal of Fisheries and Marine Sciences Education
• /
• v.16 no.1
• /
• pp.124-141
• /
• 2004

This study focuses on the off-shore trawl fishery, specifically on its restructuring and new regulations governing its operation since the 1990s. This fishery has an important role in terms of fishing capacity and production amount and is dependent on close diplomatic relations with adjacent fishing countries. The off-shore trawl fishery has been shrinking since the 1990s. In addition to a decrease in stock and an increase in imports, there are vessel buyback programs and a decrease in fishing grounds related to a tri-lateral agreement among Korea, China and Japan which have sped up the shrinking of the fishery. In this processing, costs exceed the increase of revenue. Excess investments in fishing gear and salary for crews have lowered profits in this fishery. Considering the above, the off-shore otter trawl fishery should stop increases in production and restructure the fishery by coordinating fishing gear restrictions and fishing areas, and down-sizing management capacity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.77-83
• /
• 2007

This study was carried out to examine the optimum culture condition for the production of cellulose from Saprolegnia ferax and its physical characteristics. Conclusions obtained from the results of this study were as follows: In producing the cellulose from S. ferex, optimal pH and temperature were 7.0 and $26{\sim}30^{\circ}C$ with a maximum of $26^{\circ}C$, respectively. And, optimal culture period was 11days. WHC and OHC of biocellulose were 3.2(25.04 g/g) times and 3.5(25.75 g/g) times higher than those of commercial ${\alpha}-cellulose$(7.57, 7.25 g/g) respectively. The viscosity of biocellulose is lower than that of commercial ${\alpha}-cellulose$. And the effect of rpm on the viscosity of biocellulose was more than on the that of ${\alpha}-cellulose$.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.2
• /
• pp.39-54
• /
• 1994

I am going to survey major topics relating to the title by analyzing the following statistical data. 1 : Global trend of production and import of oil and relating materials 2 : Global trend of major oil production 3 : Capacity of Japanese factory for oil production 4 : Situation of mechanical expression based on raw materials 5 : Change of production amounts of Oil products 6 : Oil production of each items 7 : Imported amounts of oil products 8 : Vegetable oil meals, production, import and global trend 9 : Production of mayonnaise, dressing and edible processing oils 10 : Intake of nutrients, supply of lipids, and consumption of oils 11 : Global production of oleochemicals 12 : Sales amount of oleochemicals 13 : Capacities of fatty acid and fatty alcohol factories 14 : Oleochemical production in 1995 15 : Oleochemical procuction in asia 16 : Production of surfactants for industrial use 17 : Sales amount of detergents and washing materials 18 : Production of soap and synthetic detergent in Japan 19 : Consumption of soap. detergent, and synthetic detergent 20: Relation beween synthetic detergent production and popularization 21 : Biodegradability of soft detergent

• Journal of the military operations research society of Korea
• /
• v.11 no.2
• /
• pp.15-22
• /
• 1985

Planning for the expansion of production capacity is of vital importance in many applications within the private and public sectors. This paper considers a sequencing expansion problem in which capacity can be added only at discrete points in time. Given the demand forecast of each period, capacity and cost of each expansion project, we are to determine the sequence of expansion necessary to provide sufficient capacity to meet the demand in all periods at minimum cost. This problem is formulated as a pure integer programming and solved by branch and bound method using Lagrangian relaxation. At first, simple sequencing expansion problem is presented, and in the latter part, extension to include precedence between projects is suggested.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.279-290
• /
• 2004

Sludge quantity has increased at "A"water treatment plant due to deterioration of raw water quality and GAC installation. Increased sludge resulted in overloading on sludge handling facilities. The object of this study is to survey sludge quantity and capacity of sludge handling facilities at "A"water treatment plant. Measured quantity of sedimentation sludge considerably exceeded the design capacity of sludge holding basin. Sludge holding basin was properly designed, but low concentration of sludge discharged from sedimentation basin caused production of large volume of the sludge. Timer operated control system for sludge withdrawal unit and leakage through a control valve were suspected to cause the low concentration. Augmentation of the control system by a turbidity meter and addition of a new control valve successfully reduced the sludge volume enough to satisfy the design capacity of sludge holding basin. Unlike sedimentation sludge, measured quantity of washwater was considerably less than the design capacity of washwater basin because it was over-designed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.2
• /
• pp.104-110
• /
• 2006

When a new facility such as automobile assembly line is designed, computer simulation is often used to estimate its actual throughput level. If it falls short of the target throughput level, then the design must be modified to increase the throughput capacity. For complex facilities having parallel processes and network of material flows, the modification procedure is not trivial. Even if the capacity of a particular bottleneck process is increased, the target throughput may not be achieved because the bottleneck may move to another process. Furthermore, each process has a different set of options with different cost to increase the capacity. In this study, we present a systematic procedure of determining the cost-effective set of options which achieves the target throughput.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.117-127
• /
• 1999

Modern production control systems based on MRPⅡ (Manufacturing Resource planning) didn't solved about the capacity and lead time problems. In the past, It solved that problems under deterministic. Therefore, the problem about determination of correct lead time and finite capacity are studied continuously by researchers. Now, we need to a integrated method that is from low level to high level instead of top-down in MRP. In this research uses the MRP-C(Capacitated Material Requirement Planning) concept that is more efficient then MRP system for capacity and flexible lead time , and shows the MRP-C algorithm and the prototype.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.609-616
• /
• 2014

Even though many computational methods (recursive formulae) for blocking probabilities in finite-capacity M/D/1 queues have already been produced, these are forms of transforms or are limited to single-node queues. Using a distinctly different approach from the usual queueing theory, this study introduces explicit (transform-free) formulae for a blocking probability, a stationary probability, and mean sojourn time under either production or communication blocking policy. Additionally, the smallest buffer capacity subject to a given blocking probability can be determined numerically from these formulae. With proper selection of the overall offered load ${\rho}$, the approach described herein can be applicable to more general queues from a computational point of view if the explicit expressions of random vector $D_n$ are available.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.583-591
• /
• 2011

'Formosa' plums were picked at three maturity stages according to skin redness, treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP at $10^{\circ}C$ for 24 h and then stored for 21 days at $10^{\circ}C$. Ethylene production, respiration rate, firmness, color, TSS, TA, and ethanol concentration were determined. Total phenolic content, total flavonoid content, and antioxidant capacity were determined periodically by separating the flesh from the peel. Ethylene production and respiration rate were strongly inhibited in all stages of the 1-MCP-treated fruit, while ethylene production dramatically increased in all stages of non-treated fruit until 11 days after harvest, after which it decreased until the end of the experiment. The respiration rate of the stored fruit increased for 11 days in stages 1 and 2 and for 7 days in stage 3 and decreased after. 1-MCP-treated fruit in all stages showed delay in fruit quality changes such as firmness, TA, skin color, and ethanol concentration, but non-treated fruit did not. Total phenolic contents, total flavonoid contents and antioxidant capacity of 'Formosa' plums were not affected by 1-MCP treatment or maturity stage. However, those values were higher in the peel than in the flesh.