• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.184-191
• /
• 2010

In the environment of 450mm wafers production known as the next-generation semiconductor production process, one of the most significant features is the full automation over the whole manufacturing processes involved. The full automation system for 450mm wafer production will minimize the human workers' involvement in the manufacturing process as much as possible. In addition, since the importance of an individual wafer processing increases noticeably, it is necessary to develop more robust scheduling systems in the whole manufacturing process than so ever. The scheduling systems for the next-generation semiconductor production processes also should be capable of monitoring individual wafers and collecting useful data on them in real time. Based on the information gathered from these processes, the system should finally have a real-time scheduling functions controlling whole the semiconductor manufacturing processes. In this study, preliminary investigations on the requirements and needed functions for constructing the real time scheduling system and transforming manufacturing environments for 300mm wafers to those of 400mm are conducted and through which the next generation semiconductor processes for efficient scheduling in a clustered production system architecture of the scheduler is proposed. Our scheduling architecture is composed of the modules for real-time scheduling, the clustered production type supporting, the optimal scheduling and so on. The specifications of modules to define the major required functions, capabilities, and the relationship between them are presented.

• The International Journal of Costume Culture
• /
• v.4 no.2
• /
• pp.124-137
• /
• 2001

The digitalization of the fashion industry refers to 'the reception of the digital environment by the industry.'Re paper presented 3 conceptual categories of 'technological environment','information environment'and 'business environment'concerning the scope of digitalization, including from the introduction and use of new technical media to new ways of thinking following the paradigm changes. And it demonstratively analyzed digitalization factors and digitalization level of fashion businesses related to the factors by 7 fashion categories. The analytic result and its suggestions are as follows. First, the five digitalization factor of the fashion industry are defined : manufacturing Process automation, computer systemization, information networking, e-business, and small batch production. Second the digitalization degree of fashion firms decreases in the order of information networking, small batch Production, manufacturing Process automation, computer systemization, and e-business, with information networking on the top and e-business, recent focal point of interest, at the bottom. Third, as for the digitalization of each clothing category, men's formal dress and unisex display the highest level of the general digitalization.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.512-515
• /
• 2006

This paper proposes the solution of compatibility problem between heterogeneous by converting automatically CAD data into proper data for the PCB board production process by using IC item information. This paper has a purpose of maximizing work efficiency with NC Programming automation and contributing to maximize productivity by NC program conversion of different Mounters and Mounter Data & Line Balance optimization.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.388-390
• /
• 2003

Recent trend of sensor-less control of induction motor applied for commuter trains in Japan is introduced. Although many inverter-fed Induction motor driven trains have been produced so far, most of them were slip frequency based conventional V/f control system using shaft encoder. There arises a new trend to apply speed sensor-less vector control., for this inverter-fed induction motor drive system. The purpose of sensor-less control is to save, cost and improve system reliability. Several sensor-less systems now under testing on the actual railway company. This paper describes the survey of the fundamental structure and feature of representative sensor-less systems mentioned above.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.351-359
• /
• 2020

The algae biomass is considered as one of the potential sources of ocean renewable energy because it can be easily mass-produced with abundant sunshine in the vast ocean space. However, the practical use of the biomass has been hindered by the lack of efficient and cost-effective harvesting and maintenance system so far. The algae biomass aquaculture systems are installed in far offshore locations in much larger scales compared to the conventional aquaculture systems so that the automatic seaweed planting and harvesting system needs to operate in heavy sea conditions in far offshore location. In this research, we develop a concept design of a mega-scaled aquaculture system and an automatic seaweed planting and harvesting system, which can operate in heavy seas and mass-produce the algae biomass.

• Mycobiology
• /
• v.30 no.4
• /
• pp.228-232
• /
• 2002

This study focused on the production of high quality compost for the growth of aero-thermophilic fungi, which has a promoting effect on the growth rate and production of oyster mushrooms. The automated solid-state bioreactor system was designed on the basis of a Three-Phase-One system, which controls the serial steps of prewetting, pasteurization and fermentation processes. High numbers of thermophilic fungi and bacteria were recovered from the mushroom composts prepared by this solid-state bioreactor. The rates of composting process were depended on physical as well as chemical factors. Among these factors, the parameters of moisture content and temperature were found to be particularly important. In our automated system, constant levels of moisture content, temperature and ventilation via mixing were provided by a centralized control apparatus including PLC, water tank and water jacket systems. These features induced higher microbiological activity of aero-thermophiles.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1246-1249
• /
• 1990

Japanese manufacturers have seen the market swing from a sellers' market to a buyers' market by dint of changes in the economic environment. Therefore, they have found the need to establish a production system in which products can be manufactured at the speed at which they are being sold and which achieve a competitive advantage. FA activity in Japan today has begun to change from local automation to totally integrated automation. This paper introduces a bottom to top based JIT-FA system and describes how to approach and introduce a CIM supported by human based systems. A fully automated CIM system is not only flexible but also rigid. However we can realize a flexible production line system by partially introducing human based systems including a decision support system.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.998-1001
• /
• 2003

Recent trend of sensor-less control of induction motor applied for commuter trains in Japan is introduced. Although many inverter-fed induction motor driven trains have been produced so far, most of them were slip frequency based conventional V/f control system using shaft encoder. There arises a new trend to apply speed sensor-less vector control., for this inverter-fed induction motor drive system. The purpose of sensor-less control is to save, cost and improve system reliability. Several sensor-less systems now under testing on the actual railway company. This paper describes the survey of the fundamental structure and feature of representative sensor-less systems mentioned above.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.467-472
• /
• 2012

Shaving shear-welding is a solid-state welding process, which utilizes plastic deformation of surplus material. The solid-state nature of this process contributes to high integrity and strength of the weld. The objective of this study was to investigate the effects of process variables on the material flow patterns and identify the process condition for obtaining the best weld. FEM simulations were carried out along with experimental characterizations. The results showed the importance of the cutter angles and the overlap lengths, and helped attain the optimum shaving shear-welding die and the best process condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.543-548
• /
• 1994

This is the paper on the development of assemnly automation and visual inspection system for smart card reader connector. The automation consists of 3 main process injection, assembly and inspection. During the injection, the main pin of a reel. transferred under uniform tension, is cut with an injection interval and positioned precisely to an injection mold by roll feeder after injection. The main base is stacked to a magazine for main pin's exact positionning to a mold . For last effective production, The turn table and pick & place are driver with gears and came by a single monter. We developed the small parts handling technigue for stable supply of micro ist pin and 2nd pin and could determine the orientation and position of those pins. For reliable inspection, We used the vision system which examins the guality of arranged pins with a CCD camera. The connector models which can be manufactured with this system are 8 pin and 10 pin type. The user can select the connector model for production and adjust the torerable error range during the inspection of arranged pins.