• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.339-347
• /
• 2001

Sperm-mediated DNA transfer has a potential to markedly simplify techniques for the generation of transgenic animals. The exogenous DNA transfer by intracytoplasmic sperm injection (ICSI) procedure has been recently introduced in the production of transgenic animals. In this study, the developmental competence and tile expression rates of transgene were investigated after injection of spermatozoon or sperm head with enhanced green fluorescent protein (EGFP) gene into the mature porcine oocytes. The porcine oocytes were injected with intact sperm, membrane-disrupted sperm or sperm head. After injection. embryos were cultured in NCSU23 medium up to the blastocyst stage, and the developmental competence and expression rates were studied. The developmental rate (67.0%) of sperm injection group was higher than that (59.7%) of sperm head injection group, and the rates of EGFP expression were also significantly different between sperm injection and sperm head injection groups (42.1 vs 20.0%) (F＜0.05). In the porcine oocytes injected with sperm treated with different methods of membrane disruption, the removal of sperm membrane did not alter the developmental competence of embryos. The rate of blastocysts at 7 days after injection with intact and membrane disrupted sperm were 15.0 and 14.2%, respectively. The EGFP expression rates, 38.4% in embryos injected with frozen-thawed sperm was higher than that, 22.4% of embryos injected with the Triton X-100 treated sperm. Prior to injection, sperm were cultured in different EGFP gene concentrations from 0.Ol to 1ng/u${mu}ell$. However, no significant difference in developmental rates of embryos among different concentrations of EGFP gene were observed. The highest expression rate of EGFP gene, 37.4% was obtained from the embryos injected with spermatozoa treated with 0.1 ng/${mu}ell$ EGFP gene. These results suggested that exogenous DNA could be attached to the membrane disrupted sperm, and that these sperm could be used as a vector carrying foreign DNA into embryos.

• Journal of the Korean Geographical Society
• /
• v.31 no.2
• /
• pp.160-197
• /
• 1996

The purpose of this study is to review research trends and issues of economic geography in Korea for the last fifty years by sub-fields of agricultural geography, industrial geography, commercial and service geography, and transportation geography. Research in Korean economic geography has progressed significantly in terms of the scope and the number of papers published during the last a half a century. Agricultural geography was a leading field of economic geography in Korea before mid-1970s. Since the mid-1970s, however, agricultural geography has turned over the leading role in economic geography to industrial geography. Classification and structure of agricultural region has been the most popular research theme in Korea, even though diverse topics has been dealt in the research of agricultulal geography in Korea during the last fifty years. In recent years, emphasis is given to study on the dynamics of agricultural region and regional differentiation of part-time farming. It is suggested that the future issues of research in agricultural geography in Korea are agricultural restructuring and changes in agricultural space under the WTO system, changes in rural area and agricultural region with the progress of informatization, changes in agricultural structures and rural society by the increase of part-time farming, governments agricultulal policy and its impacts, competitive advantages of Korean agricultulal products, and environmental impacts of agricultural restructuring. Research in industrial geography has remarkably progressed since the 1980s. Locational changes, regional industrial structure and formation of industrial region were the major topics of interest in the research of industrial geography in Korea before 1980. Since the early 1980s, in addition to the topics which were interested in before 1980, changes of industrial organization and industrial location, changes of production systems and industrial space development of high technology industries and science parks, industrial restructuring and regional economy, foreign direct investments, industrial linkages and industrial districts, and industrial policy and regional development have been the major research themes of industrial geography in Korea. Considerable number of papers has been published both in Korean journals and in foreign journals during this period. Considering global changes in the organization of industrial space, future research should be more focused on firms strategy for regaining competitive advantages, local and global perspectives of industry, industry and environmental changes, in addition to the topics which have been dealt in recent years. Research in commercial and service geography and transportation geography was negligible in Korea before the late 1970s. These two sub-fields in economic geography have begun to develop since 1980s. Periodic markets, structure of commercial area, and distribution of products were the major topics of interest in the 1980s in the commercial and service geography in Korea. In the 1990s, however reserch in producer services has been active with growth of producer services in Korean economy. It is suggested that regional changes with progress of informatization and technology, changes of international trade and regional changes, development of efficient distribution system, role of producer services in regional development, and network of producer services are the major issues to be studied in the future in the field of commercial and service geography in Korea. Commuting, distribution of products, and transportation networks have been the major topics of research in transportation geography in Korea. Diverse quantitative techniques have been applied in the most of the researches in transportation geography. It is required that future studies in transportation geography should also focus on societal and behavioral issues, policy issues regional impacts of new transportation facilities, an analysis of transportation system at the global or international level. Since the 1980s economic geography in Korea has considerably progressed with publication of papers and books. The progress can be regarded as successful in quantitative aspect, but not in quantitative aspects. For the development of Korean economic geography in both quantitative and qualitative aspects, it is necessary to promote international collaborative researches and interdisciplinary cooperations. Attention should also be given to the research on changes in competitive advantages and economic restructuring, changes of economic space with the development of high technology and the progress of informatization. economic development and culture. and foreign regional studies.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.

• Journal of agricultural medicine and community health
• /
• v.23 no.2
• /
• pp.275-285
• /
• 1998

Antibody responses(IgG) to Paragonimus westermani. Clonorchis sinensis, Cysticercus cellulosae, Sparganum Anisakis simplex, Toxocara canis and Trichinella spiralis were studied. The ELISA technique was performed to determine the prevalence of above helminthic diseases. 975 cases obtained from Yanbian of China during October, 1995 to July, 1997 were examined with a positive antibody titer of 5.74% in clonorchiasis, 4.92% in paragonimiasis, 1.54% in cysticercosis. 8.51% in sparganosis, 1.85% in anisakiosis, 12.51% in toxocariasis, and 7.08% in trichinosis respectively. And 23.87% in showed positive antibody titer at least one of the seven helminths. The differences of the age and sex in the positive sera were analysed by the Chi-squared test and the level of significance accepted was p<0.05. The significant differences in positive antibody production were P.W.(p<0.01). C.S.(p<0.01), A.S.(p<0.05). T.C.(p<0.001), and T.S.(p<0.01) respectively in age groups. sparganosis(p<0.05) in sex groups. Other parasites showed that there were no significant differences among age groups and sex groups(males and females). Higher positive antibody rate of C.S. and P.W. occured in the 50-59 years old and those of T.C. and T.S. happened in the 20-29 years old. Patients of internal disease showed more positive antibody titer, that is to say, there was significant difference between positive rate of internal diseases and that of control (p<0.01. p<0.05) in 6 helminths except cysticercosis. The result showed that some cross reactions existed among nematodes, and the developed techniques(EITB) should be done for a correct diagnosis. Also the prevalence of some important helminths may be evaluated from the result and it would be a basic data for controlling parasitic diseases in Yanbian.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.50-60
• /
• 2010

For the last half a century, the personal computer and software industries have been prosperous due to the incessant evolution of computer systems. In the 21st century, the embedded system market has greatly increased as the market shifted to the mobile gadget field. While a lot of multimedia gadgets such as mobile phone, navigation system, PMP, etc. are pouring into the market, most industrial control systems still rely on 8-bit micro-controllers and simple application software techniques. Unfortunately, the technological barrier which requires additional investment and higher quality manpower to overcome, and the business risks which come from the uncertainty of the market growth and the competitiveness of the resulting products have prevented the companies in the industry from taking advantage of such fancy technologies. However, high performance, low-power and low-cost hardware and software platforms will enable their high-technology products to be developed and recognized by potential clients in the future. This paper presents such a platform for industrial embedded systems. The platform was designed based on Telechips TCC8300 multimedia processor which embedded a variety of parallel hardware for the implementation of multimedia functions. And open-source Embedded Linux, TinyX and GTK+ are used for implementation of GUI to minimize technology costs. In order to estimate the expected performance and power consumption, the performance improvement and the power consumption due to each of enabled hardware sub-systems including YUV2RGB frame converter are measured. An analytic model was devised to check the feasibility of a new application and trade off its performance and power consumption. The validity of the model has been confirmed by implementing a real target system. The cost can be further mitigated by using the hardware parts which are being used for mass production products mostly in the cell-phone market.

• Journal of Life Science
• /
• v.27 no.12
• /
• pp.1445-1451
• /
• 2017

Mitochondria play a central role in energy generation by using electron transport coupled with oxidative phosphorylation. They also participate in other important cellular functions including metabolism, apoptosis, signaling, and reactive oxygen species production. Therefore, mitochondrial dysfunction is known to contribute to a variety of human diseases. Furthermore, there are various inherited diseases of energy metabolism due to mitochondrial DNA (mtDNA) mutations. Unfortunately, therapeutic options for these inherited mtDNA diseases are extremely limited. In this regard, mitochondrial replacement techniques are taking on increased importance in developing a clinical approach to inherited mtDNA diseases. In this study, green fluorescence protein (GFP)-tagged mitochondria were isolated by differential centrifugation from a mammalian cell line. Using microinjection technique, the isolated GFP-tagged mitochondria were then transferred to bovine oocytes that were triggered for early development. During the early developmental period from bovine oocytes to blastocysts, the transferred mitochondria were observed using fluorescent microscopy. The microinjected mitochondria were dispersed rapidly into the cytoplasm of oocytes and were passed down to subsequent cells of 2-cell, 4-cell, 8-cell, morula, and blastocyst stages. Together, these results demonstrate a successful in vitro transfer of isolated mitochondria to oocytes and provide a model for mitochondrial replacement implicated in inherited mtDNA diseases and animal cloning.

• Applied Microscopy
• /
• v.37 no.1
• /
• pp.23-33
• /
• 2007

The lacrimal gland are compound tubule-acinar glands. The main lacrimal function is the production of the aqueous layer, the thickest and major constituent of the precorneal tear film. The lacrimal gland also has an important function in the defense system of the ocular surface, forming a part of the conjunctival-associated hymphoid tissue. The ultrastructural characteristics of the lacrimal gland of the rabbit were described. The lacrimal tissues of rabbits were processed through the conventional techniques for transmission electron microscopy. The secretory portions consisted of three cell types: 1. Serous cells with electron dense secretory granules. 2. Seromucous cells containing variable moderately electron dense secretory granules with flocculent material. 3. Mucous rolls containing mucous secretory granules. The serous cells were situated at the basal portion of acini, and they contained electron dense granules of variable densities and sizes. The seromucous cells contained a few protein secretory granules and more mucous secretory granules. The mucous cells contained even fewer protein secretory granules and exclusively mucous secretory granules. The epithelium of the intralobular ducts showed secretory granules, junctional complexes, and large basolateral intercellular spaces with lateral folds. These study might be helpful in determining inter-relationships, similarities and differences among the orbital glands of various physiological or pathological conditions.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.21-27
• /
• 2015

The Phoenix-shaped Glass Ewer, which is No. 193 National Treasure, was seriously damaged by a unique form of green glass pieces when excavated among a number of burial accessories of Hwangnamdaechong known to have been formed in the 5th century. While it has long been exhibited at the National Museum of Korea since its treatment for conservation treatment at conservation science laboratory in 1984, the existing adhesive materials seriously deteriorated for the 30 years, and the condition was quite unstable. The epoxy resin used as a restorative materials turned yellowing due to the light and heat so much that it was no longer able to exhibit it in a stable and effective manner. As a result, a re-treatment for conservation was conducted lately. This study focuses on the three pieces of Gold wires used to carefully wrap up the handle of the Phoenix-shaped Glass Ewer broken into three pieces, which has not been studied so far. As for the analysis method for Gold wires, SEM-EDS and Stereo Microscope were used for nondestructive analysis. First of all, the result of the SEM-EDS analysis shows that the composition was Au 91.9 wt.%-Au 92.8 w.t% and Ag 5.9 wt.%-Ag 6.5 wt.%, which indicates that it was an alloy made of Au and Ag. The production technique of Gold wires was also observed by means of optical microscopes. In general, Gold wires were manufactured by a drawing process in which a lump of gold was beaten or pulled out of a hole or by a process of twisting a gold plate. However, Gold wires separated from the handle of the Phoenix-shaped Glass Ewer did not involve any trace of twisting on the surface. Rather, fine vertical stripes were observed with the sections filled up. Hence, it is thought that this Ewer went through a drawing process and then was mended. As a result, no certain relation with the golden mending material used for the Phoenix-shaped Glass Ewer was verified. The findings above indicate that most of the existing researches on Gold wires recognized them, not as separate remains, but merely as a component of other golden remains. Thus, there has been little systematic study on the manufacturing techniques of Gold wires. The future study on Gold wires may verify the correlation between the Gold wires used to fix the handle of the Phoenix-shaped Glass Ewer, which is examined in this study, with that of golden remains in the Silla era.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.985-996
• /
• 2007

The purpose of this study is to analyze the symbolism of traditional Korean patterns which reflect an emotional cultural background of Korean people, to apply modernized and developed patterns to Textile Design for fashion cultural products, and to explore productive direction of developing designs of fashion cultural products. The process of developing Textile Design of fashion cultural products which applied symbolism of traditional Korean patterns was conducted as follows. Firstly, based on '05 S/S-'07 S/S fashion trends, a design concept wat decided(man-urban ethnic style, woman-romantic ethnic style). Secondly, motive was abstracted from selected traditional patterns to develop into modem patterns. Thirdly, items were selected according to symbolic meaning of traditional Korean patterns. Man's items included shirts, necktie, and handkerchief which were highly preferred by Korean and foreign visitors. Finally, developed textile designs were diagrammed by item using textile CAD and an illustrator 10 and presented as images. The following results were obtained. First, textile designs for fashion cultural products, in which apply traditional patterns may reflect the understanding of traditional aesthetic beauty and philosophical approach by applying symbolic significance inherent in patterns as well as the aesthetics of the patterns. Second, traditional patterns have been recognized as old fashioned to consumers because they have been often used for traditional handicrafts or folk products. If their unique shapes are changed or simplified, emphasizing images, and trend styles and colors are used, they will be recreated as a modem design. Third, textile designs using traditional patterns may provide various images and visual effects according to techniques and production methods. Then, the method will be applied to many items. Finally, since traditional patterns in fashion cultural products can be used as our unique design elements, they can be utilized as the source of design inspiration for the development of value-added products.

• Development and Reproduction
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2009

Implantation itself is governed by an array of endocrine, paracrine and autocrine modulators, of embryonic and maternal origin. Window of implantation is the unique temporal and spatial expression of factors allows the embryo to implant via signaling, appositioning, attachment, and invasion in a specific time frame of $2{\sim}4$ days. When the embryo has arrived in the uterine cavity, a preprogrammed sequence of events occurs, which involves the production and secretion of a multitude of biochemical factors such as cytokines, growth factors, and adhesion molecules by the endometrium and the embryo, thus leading to the formation of a receptive endometrium. Cytokines such as LIF, CSF-1, and IL-1 have all been shown to play important roles in the cascade of events that leads to implantation. Integrin, L-selectin ligands, glycodelin, mucin-1, HB-EGF and pinopodes are involved in appositioning and attachment. The embryo also produces cytokines and growth factors (ILs, VEGF) and receptors for endometrial signals such as LIF, CSF-1, IGF and HB-EGF. The immune system and angiogenesis play an important role. The usefulness of these factors to assess endometrial receptivity and to estimate the prognosis for pregnancy in natural and artificial cycles remains to be proven. Integrins, pinopodes, glycodelin and LIF (from biopsies) are promising candidates; from uterine flushings, glycodelin and LIF are also candidates. The ideal serum marker is not available, but VEGF, glycodelin and CSF have some clinical implications. Further evaluation that includes larger groups of infertile women and fertile controls are needed to elucidate whether their presence in plasma, flushing fluid, or endometrial samples can be used as some kind of a screening tool to assess endometrial function and prognosis for pregnancy before and after artificial reproductive therapy. A better understanding of their function in human implantation may lead to therapeutic intervention, thereby improving the success rate in reproduction treatment. New molecular techniques are becoming available for measuring both embryonic and endometrial changes prior to and during implantation. The use of predictive sets of markers may prove to be more reliable than a single marker. Ultimately, the aim is to use these tools to increase implantation in artificial cycles and consequently improve live-birth rates.