• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.196-199
• /
• 2008

In this study, gas hydrate production has been followed using swapping method to investigate the effect of injection rate of flue gas and soaking period in unconsolidated artificial sand sample. The results shows that recovery factor of methane gas decreases with increasing the injection rate of flue gas. This indicates that the velocity of flue gas in porous media may act as kinds of inhibitor for production of hydrate. Also recovery factor increases with increasing the soaking time.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.304-305
• /
• 2018

Development of waterproof methods and materials resulted in the huge changes in waterproof construction materials. In consequence, the construction-standard-production-rate underwent overall revision in 2018. Especially, from the development of the specification standard and construction methods, the waterproof construction which had lower applicability in the existing construction production rate was revised. The construction methods which did not have applicability were removed. In addition, as there was a material difference based on parts, the constructionstandard-production-rate was revised by distinguishing vertical part and floor. Furthermore, by suggesting more clear work extent, the practicability in creating the standard for calculation of the estimated price in the construction field will increase.

• Plant Resources
• /
• 제8권2호
• /
• pp.167-170
• /
• 2005

This study was conducted to determine feasibility of production system of Perilla frutescens leaf-stem by fertilizing of Sta-Green in pots. Germination rate of Perilla frutescens seeds collected in 2002 was $7\%$, also germination rate of seeds collected in 2003 was $62\%$, while germination rate of seeds collected in 2004 was above $93\%$. Seed germination rate of Perilla frutescens collected in 2004 were higher than seed gathering in 2002. Especially, plant growth and yield of Perilla frutescens grown in pot(The pots was filled with soil mixtures of Sta-Green and Peat Moss mixed with 40:60 ratio.) was the highest. These results indicate that leaf and stem production of Perilla frutescens can be improved by fertilizing of Sta-Green in pots.

• Journal of Microbiology and Biotechnology
• /
• 제7권6호
• /
• pp.438-440
• /
• 1997

A continuous fermentation system employing immobilized cells of Zymomonas mobilis and Saccharomyces cerevisiae was studied for the mass production of ethanol. Ethanol production by cells immobilized with Ca-alginate was better than those by cells immobilized with K-carrageenan. Maximum ethanol production employing a continuous system by cells immobilized with Ca-alginate was 77.5 $g.l^{-1}h^{-1}$ at a dilution rate of 1.85 $h^{-1}$ with 82% conversion rate for Z. mobilis while that was 40.2 $g.l^{-1}h^{-1}$ at a dilution rate of 0.92 $h^{-1}$ with 85% conversion rate for S. cerevisiae. These results suggest that Ca-alginate is a better cell immobilization matrix than K-carrageenan and that immobilized cells of Z. mobilis are more efficient than S. cerevisiae for ethanol production.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2184-2186
• /
• 2005

Neutron production is very important to apply fusion energy through SCBF(Spherically Convergent Beam Fusion) device and its rate is Proportional to the square of the ion current$({\propto}I^2)$. Also the ion current has a close relation with the potential well structure in grid cathode. In this paper, the ion current is calculated for the increasement of neutron production rate in a variety of grid cathode geometry. The atomic and molecular collision are taken into account by Monte Carlo Method and Potential is calculated by Finite Element Method. Main processes of the discharge is the ionization of $D_2$ by fast $D_2^+$ ion. As the number of a cathode ring is small and gap distance decreases, the ion current increases and neutron production rate will increase.

• 수산경영론집
• /
• 제36권3호
• /
• pp.1-24
• /
• 2005

Korean fishery wage system has been evolved with the different titles. However, Since the law of fishing crew was enacted in 1984, the fishery wage system has been established as a rate system, which is a legal term. The present rate system in practice shows various contents and modalities, depending on fisheries and regions, but the fisheries of large trawl cooperative employ a rate system of fixed plus rate wage. However, such change did not transform basically the properties of pure rate scheme. As well known, fishing vessel owners face an awful lot of difficulty in managing and controlling effectively the production process because fishing activities are carried out in the seas remote from the land. Thus, it tend to be inevitable for vessel owners to employ a rate system to induce fishermen's positive motivation for promoting productivity and saving operating costs. However, the rate system has worked out as a driving force, which induce an increase in production more strongly under the expansion of vessel numbers and power and the keener competition of fishing activities. Even though the control mechanism of fishing instruments are well established, fishermen become naturally to have an incentive to increase their fishing effort for maximizing production since they are able to raise their shares by maximizing the quantity harvested. Thus, as far as the rate system exists, fisheries administration may have much difficulty in realizing its fishery management goals only through vessel reduction and fishing gear regulations. Also, under the rate system fishery management authority may be in face of a serious dilemma between the spontaneous rate system and vessel reduction policy. If the realistic aspect of the rate system is recognized and resource restoration and profit promotion are main policy goals, it is necessary to develop effective ways to control vessel owners' and fishermen's production-maximizing motives at an appropriate level. From this point of view, it seems reasonable to introduce TAC system by species or by fisheries into the existing fishery system. The research results suggest that if the fisheries administration could understand clearly the spontaneous fisheries wage system, it would know the norm of TAC and the basic reasons for illegal fishing activities and thus it would be able to develop and implement more realistic resource management policies.

• 한국수산과학회지
• /
• 제38권6호
• /
• pp.353-358
• /
• 2005

The present study investigated the feces production rate and fecal nitrogen production ratio of abalone, Haliotis discus hannai fed seaweed, Undaria pinnatifida. The abalone, with shell lengths of 3 cm, 5 cm, and 7 cm, were tested at temperatures of $12^{\circ}C$, $16^{\circ}C$, and $20^{\circ}C$ in a semi-recirculating aquaculture system. Under the given experimental conditions, the weight specific feces production rate (FPw) of the abalone increased with the decrease of shell length and the increase of temperature. The relationship of the FPw was. $FPw=-3.092+206.573/T - 1916.8/T^2+0.141L -0.037L^2(r^2=0.9412)$. In addition the abalone produced 17.8-22.5% of fecal material against ingested seaweed, Undaria pinnatifida, and $18.4-22.4\%$ of nitrogen ingested total nitrogen.

• KSBB Journal
• /
• 제13권6호
• /
• pp.675-680
• /
• 1998

In both 7L and 20L fermentor experiments the level of dissolved oxygen (D.O) strongly affected growth and PHBV production of Azotobacter vinelandii UWD. A higher D.O. increased carbon substrate consumption rate and cell growth rate with a similar residual biomass production. However, a lower D.O. was a much better condition for PHBV production. In a 20L fermentor experiments controlled at 5% D.O. cell growth rate was about twice faster(0.555 hr-1 and 0.260 hr-1 at the acid and the glucose phase, respectively) with an equal amount(4.5 g/L) of residual biomass production. However, PHBV content in the cell(62.3 wt%) increased 17.3 times at 1% D.O.

• 한국건설관리학회논문집
• /
• 제5권5호
• /
• pp.93-100
• /
• 2004

For accurate construction contract time estimation, few parameters are more significant than crew production rates and factors affecting the rates. However, statistical analysis techniques for finding such factors are not always simple mainly because there are many factors and the interaction between factors is not well quantitatively understood. This paper presents methodology of identifying factors driving crew production rates. The methodology is further demonstrated with representative data collected by the author from 13 on-going highway constructions. Three factors were identified as statistically significant drivers of Cap crew production rate: 'Cap Size (m3/ea)'; 'Cap Length (m)'; and 'Cap Shape (Rectangle vs. Inverted 'T')'. It was also found that the production rates are best explained by a multiple regression model with two of the drivers; 'Cap Size' and 'Cap Shape'.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.38-44
• /
• 2005

Many mid-sized companies in Korean automotive industry have attempted to solve the lack of human power, to control the quality of components, to improve the production rate, and to innovate the manufacturing line. The goals of this study are to analyze the production rate of an automotive component manufacturing line using simulation software, to construct a Flexible Automation Subassembly (FAS) system and to suggest an optimized layout design using FAS line. In this research, the simulation model for manufacturing line was developed and used the realistic data of a medium sized company in Korean automotive industry. To complete this research, a simulation software 'ARENA' was used. This research analyzed the work distribution strategy and cycle time element for production flow and proposed an optimized layout to resolve line balancing problem which would bring the improved production rate.