• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.435-449
• /
• 2010

Soils in the sloping uplands in Korea are subject to intensive land use with high input of agrochemicals and are vulnerable to soil erosion. Development of the environmentally sound land management strategy is essential for a sustainable production system in the sloping upland. This report addresses the status of upland agriculture and the best management practices for the uplands toward the sustainable agriculture. More than 60% of Korean lands are forest and only 21% are cultivating paddy and upland. Uplands are about 7% of the total lands and about 62% of the uplands are in the slopes higher than 7%. Due to the site-specificity of the upland, many managerial and environmental problems are occurring, such as severe erosion, shallow surface soils with rocky fragments, and loadings of non-point source (NPS) contaminants into the watershed. Based on the field trials, most of the sloping uplands were classified as Suitability Class III-V and the major limiting factor was slope and rock fragments. Due to this, soils were over-applied with N fertilizer, even though N rate was the recommendation. This resulted in decreases in yield, degradation of soil quality and increases in N loading to the leachate. Various case studies drew management practices toward sustainable production systems. The suggested BMP on the managerial, vegetative, and structural options were to practice buffer strips along the edges of fields and streams, winter cover crop, contour and mulching farming, detention weir, diversion drains, grassed waterway, and slope arrangement. With these options, conservation effects such as reductions in raindrop impact, flow velocity, runoff and sediment loss, and rill and gully erosion were observed. The proper management practice is a key element of the conservation of the soil and water in the sloping upland.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.8-13
• /
• 2010

Seedling establishment, overwintering ability and dry matter production of Chinese milk vetch (Astragalus sinicus L. CMV) in natural reseeding practice were compared with the annual seedling in 2006~2007 and 2007~2008. In natural reseeding, CMV seeds were distributed up to 15 cm soil depth in autumn after rice harvest and the seeds generally emerged from soil at less than 5 cm depth while they all emerged from soil surface in the annual seeding. It took 7-8 d longer in seedling establishment of the natural reseeding practice than the annual seeding. Generally, the natural reseeding practice showed higher seedling stand than the annual seeding because of high seedling survival rate. The high seedling survival rate in natural reseeded plant was attributed to the longer root length than that of the annual-seeded plant. In annual seeding, most of the seeds emerged from the soil surface and the root can not easily penetrate the soil while, in natural reseeding technology, the seeds incorporated into the soil during land preparation emerged from the soil at 0 to 5 cm depths, thereby having longer root length. The long root length contributed to greater ability to survive even under low temperature and low soil moisture conditions during winter. The dry matter production in the natural reseeding practice was also higher than the annual seeding when the temperature is low and soil moisture is not sufficient. This result indicates that natural reseeding technology is more stable and beneficial in seedling establishment and dry matter production as compared with the annual seeding especially under unfavorable environmental condition for CMV growth. This practice could be encouraged in CMV-rice cropping system in the southern parts of Korea.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.253-257
• /
• 2001

This study reveals the sheet metal working with multi-forming type ultra precision process. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming ultra precision progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. This part I of papers related to the analysis of production part and strip process layout design through the metal forming simulation by DEFORM and IDEAS.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.185-189
• /
• 2001

In order to prevent the production defects the optimum design of product, jig and fixture putting in the field is very significant manufacturing method. Drilling Jig is the device according to industrial demand for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with jig and fixture for mass production is a specific division. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and jig & fixture structure, machining condition for tool making, tool materials, heat treatment of jig & fixture components, know-how and so on. In this study we designed and constructed a drilling jig of mass production and performed tryout under the Auto CAD, Auto Lisp database, that we made by database, and window environment. Especially this study is reveals with the analysis of part drawing, jig planning, jig design etc, and then the result of drill jig's making try out.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1298-1309
• /
• 1999

The nutritional value of protein varies between feedstuffs. It is possible to feed animals using crystalline amino acids as a sole nitrogen source, but in practice only some limiting amino acids are added to the diet. In order to use feedstuffs efficiently, it is important to determine exact amino acid requirements. Reported values differ widely because the requirements are affected by various factors. In this report, therefore, the factors affecting amino acid requirements are reviewed as follows: 1) availability of dietary amino acids, conversion factors of nitrogen to protein, interaction of amino acids, and strain, sex and age of animals; 2) amino acid requirements for maximum performance and maintenance, usefulness of non-essential amino acids; 3) plasma amino acid concentration as a parameter to determine amino acid requirements; and 4) nitrogen excretion to reduce environmental pollution. These factors should be considered, it is to improve the dietary efficiency, which is to reduce excess nitrogen excretion for environmental pollution.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.104-108
• /
• 2000

Drilling Jig is the device according to industrial demand for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with jig and fixture for mass production is a specific division. In order to prevent the production defects the optimum design of product, fig and fixture putting in the field is very significant manufacturing method. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and its phenomena, jig & fixture structure, machining condition for tool making tool materials, heat treatment of jig & fixture components, know-how and so on. In this study we designed and constructed a drilling jig of mass production and performed tryout under the Auto CAD, database, and window environment. Especially Part1 of this study is reveals with the analysis of part drawing, jig planning, jig design etc.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.33-37
• /
• 2000

Milling fixture is one kind of machining device according to the industrial demands for multi manufacturing products on the growing at alarming rate. In the field of design and making for machine tool working, welding, assembling with fixture for mass production is a specific division. In order to prevent the production defects, occurring, the optimum design of product, fixture putting in the field is very significant manufacturing method. They require analysis of many kinds of important factors, theory and practice of machine tool operating process and its situations, fixture and its structure, machining condition for tool making tool materials, heat treatment of fixture components, know-how and so on. In this study we designed and constructed a milling fixture of mass production and performed tryout under the AUTO CAD, database, I-DEAS and WINDOW environment. Especially part 1 of this study is reveals with the analysis of part drawing, fixture planning, fixture design etc.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.3
• /
• pp.455-462
• /
• 2003

Biotechnological research and development are moving at a very fast rate. The subject has assumed greatest importance in recent years in the development of agriculture and human health. The science of biotechnology has endowed us with new tools and tremendous power to create novel genes and genotypes of plants, animals and fish. The application of biotechnology in the fisheries sector is a relatively recent practice. Nevertheless, it is a promising area to enhance fish production. The increased application of biotechnological tools can certainly revolutionise our fish farming besides its role in biodiversity conservation. The paper briefly reports the current progress and thrust areas in the use of synthetic hormones in fish breeding, production of monosex, uniparental and polyploid individuals, molecular biology and transgenesis, biotechnology in aquaculture nutrition and health management, gene banking and the marine natural products.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.1
• /
• pp.123-135
• /
• 1990

An extensive survey is carried out on the applications of AI (Artificial Intelligence) and ES (Expert System) in mathematical programming and simulation, which are the most frequently used tools in production planning. A scheduling field is also reviewed. The scheduling problem is one of the most attractive area for AI and ES researchers, since any practical algorithmic solution methods are not available. The current practice and difficulty of applying AI and ES to production planning are discussed and future research directions are identified.

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.203-216
• /
• 1999

Recent public concern about air pollution caused by swine production facilities has forced to develop the methods to reduce and control the swine odors. Swine odors were affected the life of pig farm neighborhoods, swine productivity, pig health, diseases, and human right, safety, sanity as negatively. The first approaches of control of swine odors are the change or improve of the classical management systems, which are manure treatment method, manure storage facility, phase feeding, sex-divided feeding, feeder type, liquid-slurry feeding, environment control of swine building and dust control of indoor swine facility. The methods to control odor emission from manure have to include the diet modification as nutritional basis. In recent, research emphasis has focused on manipulating the swine diet to increase the nutrient utilization of the diet to reduce excretion products and reduction of odors. There are lots of feed additives and pit additives introduced as practical basis for reducing odor emissions. The ozone treatment method is candidate as the good system for reducing swine odor. But this system is still too expensive to practice in present.