• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2011

This study was conducted to investigate the influence of different polyethylene film (P.E. film) for mulching on the changes in soil temperature and the production of good feathered apple nursery trees. M.9 rootstocks with stem diameter of 9.1~11.0 mm were planted in plots covered with different P.E. film (i.e., transparent P.E. film, black P.E. film, and bare soil as control). Three weeks after planting, the rootstocks were veneer grafted with 'Sinano Sweet' apple cultivar. In the middle of June, BA was sprayed to nursery for inducing feathering during the growing season. The soil temperature of the control was higher than air temperature by about $0.7^{\circ}C$ from mid April to early October, and that of P.E. film mulching was about $1{\sim}5^{\circ}C$ higher than that of the control. The soil temperature under transparent P.E. film was about $2{\sim}3^{\circ}C$ higher than that under black P.E. film. The diurnal range of soil temperature under the black P. E. film was lowest among all treatments. The P.E. film mulching induced better tree growth and feathering than bare soil. Percentage of good feathering apple nursery of black P.E. film was highest among all treatments because the soil temperature unuder black P.E. film in the early growing season was higher than that of the control and the number of days when the maximum soil temperature was over $35^{\circ}C$ in the summer was lower than that under the transparent P.E. film.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.189-195
• /
• 1999

This study was carried out to clarify several factors affecting embryogenesis from anther culture of nine cultivars in Brassica oleracea L. var. italica and to investigate the characteristics of plants derived from anther culture. Androgenesis from anther culture was elevated on the B5 medium supplemented with 0.1mg/L NAA, 0.1mg/L 2.4-D and 10% sucrose. Embryo production in liquid medium was five-fold higher than solid medium. High temperature treatment at 35$^{\circ}C$ for one day before transfer to culture room maintained at $25^{\circ}C$ had effective to induce embryogenesis of cultured anthers but extended treatment at 35$^{\circ}C$ decreased significantly the percent of embryogenesis. Frequency of embryogenesis from cultured anthers exhibited significant difference from 2.8% in 'Green Valiant' to 21% in 'Haisi' as affected by genotypes. Percent of spontaneously dihaploid among regenerated plants from anther culture was ranged from 62 to 74% as affected by the genotypes. Characteristic in relation to plant height, number of leaves and branches, and size of head from anther-derived plants showed differential variation in 'Rokguray' and 'Haisi'. Among these charaters obtained from two cultivars, five lines were selected for early maturity, long plant height and large head. Selected lines were used as breeding meterials for F$_1$ hybrid.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.423-431
• /
• 2012

The trends of Green growth and environmentally-friendliness came to be the key development indicator for sustaining global environment for the future. Korean government reflected these trends in the main flows of the national development index. Korean construction industry is concentrating investment on fields related to these trends such as technologies for carbon dioxide deduction, materials or products for environmentally-friendly building and alternative energy development, as well. However, efforts to follow these trends during the construction process as a step for production phrase are not being considered enough. In this study, we analysed current status and points to be improved of on-site environment management by surveying major project owners and representatives of the environmental affairs in the leading companies of those fields. Also, we suggested organizational structure and operation model as a solution for enhancing environmentally-friendliness for systematic approach to manage on-site environment in public construction sites. In addition to these solutions, further approaches such as shifting paradigm of project owners and contractors, securing workforce and practical budget for efficient management activities, developing environmental management manuals, setting standards for evaluation of activities are needed for the stable settlement of on-site environmental management.

• The Journal of Internal Korean Medicine
• /
• v.26 no.1
• /
• pp.93-106
• /
• 2005

Objectives : The aim of this study is to characterize the effect of Chungganhaeju-tang on $TGF-{\beta}l$-induced hepatic fibrosis. Materials and Methods : mRNA and protein expression levels of $TGF-{\beta}l$ in Chungganhaeju-tang treated HepG2 cells were compared to untreated cells using quantitative RT-PCR and ELISA assay, respectively. mRNA expression levels of the $TGF-{\beta}l$ signaling pathway genes $(T{\beta}R-I,\;T{\beta}R-II,\;Smad2,\;Smad3,\;Smad4,\;and\;PAI-1)$ and fibrosis-associated genes (CTGF, fibronectin, and collagen type $l{\alpha}$) were evaluated by quantitative RT-PCR. The effect of Chungganhaeju-tang on cell proliferation of T3891 human fibroblast was evaluated using $[^3H]Thymidine$ Incorporation Assay. Results : Inhibition of $TGF-{\beta}l$ mRNA expression and protein production was observed with treatment of Chungganhaeju-tang and seen to be dose and time dependent. Whereas $TGF-{\beta}l$-mediated induction of PAI-1 was suppressed with treatment of Chungganhaeju-tang, expression of the $TGF-{\beta}l$ signaling pathway genes such as $T{\beta}R-I$, $T{\beta}R-II$, Smad2, Smad3, and Smad4 was not affected. With treatment of Chungganhaeju-tang, inhibition of $TGF-{\beta}l$-induced cell proliferation of T3891 human fibroblast was observed, as well as abrogation of $TGF-{\beta}l$-mediated transcriptional up-regulation of CTGF, fibronectin, and collagen type $I{\alpha}$. Conclusion : This study strongly suggests that the liver cirrhosis-suppressive activity of Chungganhaeju-tang may be derived at least in part from its inhibitory effect on $TGF-{\beta}l$ functions, such as blockade of $TGF-{\beta}l$ stimulation of fibroblast cell proliferation and fibrosis-related gene expression as well as expression of $TGF-{\beta}l$ itself.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.303-307
• /
• 2013

The cultivation of Poria cocos on tree-stumps and logs, was first described at the beginning of the 13th century. Poria cocos has been used for medicinal purposes to treat physical and mental recuperation, promote diuresis, forgetfulness and physical weakening. The artificial cultivation techniques of P. cocos was reported in China in 1957. are reported. The basic study on morphological characteristics and artificial cultivation method of Poria cocos with pine tree log buried under ground were initiated by Rural Development Administration. To widen the utilization of harvested sclerotia of Poria cocos as new food stuffs, powder of the sclerotia were used for producing new soft drinks and supplemented to wheat flour to make functional bread. Last 30 years, the supply of P. cocos in Korea through cultivation could not meet the domestic demand, Korea collected P. cocos in the mountainous areas and also import the sclerotia from China. Since the domestic demand of the sclerotia in China increased, the price of imported sclerotia of P. cocos also increased. Recently, high-quality and high-yielding cultivation methods were developed in Gyeongbuk Agricultural Research and Extension Services (GARES). The new cultivation methods of P. cocos developed by GARES was to change traditional cultivation method from under ground to above ground cultivation house, and shortened cultivation period by half, and improved the quality of the sclerotia. Therefore, it is suggested that advanced new technology for production of sclerotia of P. cocos from under ground and above ground must be developed for fullfil the domestic demand of the sclerotia.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.81-88
• /
• 1996

Cereals were used as solid-substrate for the cultivation of Ganoderma lucidum. The hydration time with cold water appeared to be 10, 11 and 12 hours for Malt, Danyeob and Black soybeans respectively, and the water content was enough for mycelial growth in this condition. The hydration times required for sorghum, job's tears, barley, brown rice and wheat were 2.5, 4, 5, 10 and 12 hours respectively, but the final water content was much less than optimum water content (65%). Hot water reduced the hydration time of soybeans, and the water content reached to 65% within $120{\sim}150$mins. This condition showed the optimum for the mycelial growth. For the other cereals, it took about $17{\sim}120$ mins to reach the optimum water content (65%). From this result, hot water was better than cold water for the hydration of cereals. We attempted to develop a practically applicable process by combining the soaking and sterilization. This process was successful with soybean and about 1.1 times of water based on the weight of soybean appeared to be suitable. In all varieties of cereal, the water content of 65% appeared to be the best for the growth of the fungi and production of glucosamine related to the amount of mycelium. The mycelial growth rate in accordance with kinds of solid-state materials was in the order of barley > wheat > job's tears > sorghum > brown rice > soybean. The glucosamine content for determing the mycelial growth in solid material was in the order of wheat> barley > brown rice > job's tears > sorghum > soybean.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.393-404
• /
• 2020

We observed changes in the properties of the glaze layer according to the content of iron oxide and inferred the composition, content, and environment of the materials used in the past during the production process of black ware. First, experiments were conducted using different ratios of iron oxide, feldspar, calcite, and ash at different temperatures and firing environments; the characteristics of glaze were classified into five groups in the oxidation environment. Different properties were identified in the reducing environment above 1200℃. The crystal identified in the experiment was similar to the glaze characteristics in the excavated black ware. The crystal phase appeared in four groups: band shape, circular, arborescent phase, and needle crystal, depending on the change in the content of iron oxide. However, the difference in crystals did not appear significantly at high temperatures. In addition, crystals of glaze were divided into two groups depending on the component ratio. The presence or absence of feldspar is thought to affect crystallinity and amorphous iron oxide and the changes in the glaze layer changed substantially depending on the amount of iron oxide. In particular, it was confirmed that the aspects of iron oxide in the oxidation and reduction environments were different and, therefore, crystallization due to the firing environment also affected the optical characteristics.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.249-255
• /
• 2017

BACKGROUND: Globally, mulberry (Morus sp.) is exploited for feeding leaf to silkworms in order to obtain silk fiber or for animal feedstock production. Also, mulberry fruit is known to a by-product that was produced from mulberry tree after harvesting leaves for silkworm rearing, as a yield and consumption of mulberry fruit was increased, it has been fixing to a newincome crop. Mulberry leaves and fruits are used for the health benefits of human beings. Mulberry contains various bioactive components, such as alkaloids and flavonoids. Mulberry flavonoids are an important part of the diet because of their effects on human nutrition. The flavonoids in mulberry leaf and fruit of 'Suhyang'(Morus alba L.) were determined. METHODS AND RESULTS: Flavonoids for mulberry leaf and fruit of 'Suhyang' were analysed using ultrahigh performance liquid chromatography coupled with diode array detection and quadrupole time-of-flight mass spectrometry (UPLC-DAD-QTOF/MS)technique. An UPLC-DAD-QTOF/MS system was used, and identification of mulberry leaves constituents was carried out on the basis of the complementary information obtained from LC spectra, MS ions, and MS/MS fragments. The mulberry leaf (16 flavonoids) and fruit (9 flavonoids) were isolated and analyzed from Suhyang using UPLC-DAD-QTOF/MS chromatogram. To the best of our knowledge, Quercetin 3-O-(6"-O-malonyl) glucoside and quercetin 3-O-rutinoside (rutin) was detected on the highest content in leaf and fruit, respectively and further research will be devoted to evaluate their biological activity. CONCLUSION: Obtaining information about the concentration of functional materials in mulberry leaves could contribute to the development and promotion of processed, functional products and offer possible industrial use of 'Suhyang', holding promises to enhance the overall profitability of sericulture.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.158-175
• /
• 2001

The purpose of this study was to understand and improve the clothing habits and the apparel industry of North Korea in preparation for the reunification of South and North Korea. For this study, literary data, reports, periodicals, interviews and internet data of the two Koreas were reviewed. North Korean clothing habits used to be monotonous and uniform but nowadays people's clothes have become somewhat brighter in color and more diverse in design than before. In particular, liberal and individual dressing habits appeared among the privileged classes. When taking part in national events, women have to wear the traditional Korean costume, Hanbok, while men wear business suits for formal wear. In general, men don't wear Hanbok. Students have to be in uniforms but blue jeans, T-shirts with English logos were popular among them reflecting their sensitivity and openness towards western cultures. The brides usually wear pink Hanboks and the bridegrooms wear black business suits for their wedding. North Koreans also wear Hanbok on national holidays like South Koreans. Clothing is the most important item in the trade of process commission between North and South Korea. Trading items are mid to low end men's clothing for the most part due to less emphasis on fashion in the North. The processing is indirect trade and composed of sample making and contracting, sending out materials and production, carrying in goods and setting accounts. To activate South-North trade, establishment of infrastructure, stabilization of shipping, reducing high costs of distribution, building direct communication system by setting up office in a neutral zone and simplifying procedures in applying for the South and North Korea Economic Cooperation Fund. On the other hand, clothing and textiles education is carried on at art colleges, light industries colleges and commercial colleges in Pyongyang. Clothing institutes which study Hanbok and Western clothes, are installed in each city and province. Graduates who majored in clothing and textiles are posted in institutes or apparel factories. Their job is designing, patternmaking and sewing for their customers. Most of them are women and in good state of economic conditions. The North Korean clothing industry has been the core national industry that has developed based on overseas demand form the mid 1980s. The standard is that of South Korea in the early 1980s. In 1999, trade of North Korean textile products with trade counterparts such as Japan and China was $1.3 million in exports and $1.27 in imports. Of this amount the export takes up 25.4% of the total exports in North Korea. However, fundamentally even in sectors that are irrelevant to politics such as the fashion clothing industry, trust between the South and North should be a prerequisite. Only through this can exchange between North and South and economic cooperation contribute towards the reunification.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.