• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.269-273
• /
• 2001

Semiconductor wafer fabrication is a business of high capital investment and fast changing nature. To be competitive, the production in a fab needs to be effectively planned and scheduled starting from the ramping up phase, so that the business goals such as on-time delivery, high output volume and effective use of capital intensive equipment can be achieved. In this paper, we propose Stand Alone layout and In-Line layout are analyzed and compared while varying number of device variable changes. The comparison is performed through simulation using ProSys; a window 98 based discrete system simulation software, as a tool for comparing performance of two proposed layouts. The comparison demonstrates that when the number of device variable change is small, In-Line layout is more efficient in terms of production quantity. However, as the number of device variable change is more than 14 titles, Stand Alone layout prevails over In-Line layout.

• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.225-230
• /
• 2015

Productivity is the essential comparative advantage in high tech industry company in 21 century. These company endless endeavor for low cost production. Low cost production can be led by low facility operation cost and low labor cost. But reducing facility operation cost arise much investment. Thus many high tech company drive reduction of labor cost. These article suggest model for reducing labor cost and prove a effect by example of some company.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.111-118
• /
• 1999

This article describes the basic engineering concepts to be considered in the application of an induction heating furnace in the hot-dip galvanizing line. Experience in the Dongkuk project in Pohang, has shown that this arrangement has many advantages over the conventional method of using a combustion-gas heated furnace. Investment and operating costs are lower, the line length is much shorter, line operation is more convenient, air pollution is reduced, and the coated strip at of top-quality. As these benefits become well known, it is anticipated that the concept of induction heating will be more widely used in both new and revamped process lines. Induction heating is suitable for the production of Commercial Quality hot galvanized coils. More research is required to extend the present concept to the production of higher forming grades such as Drawing, Deep Drawing and Extra Deep Drawing Quality steels. A combination of induction heating and combustion-gas heating may lead to the way to the processing of these qualities of strip.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.59-60
• /
• 2006

It is bringing out the importance of automated LCD testing equipment that satisfy a definite quality, confidence and testing speed, as LCD enterprises are recently expanding the production and facility investment in proportion to the sudden increase of LCD demand. So far, LCD inspection is however conducted by manual, or the confidence of existing testing equipment falls short of LCD enterprises's standard. It is therefore important to develop the testing equipment that determines the quality of product for production of an excellent LCD.

• 한국초지조사료학회지
• /
• 제15권3호
• /
• pp.192-197
• /
• 1995

This experiment was conducted to evaluate the grazing performance of dairy cattle for winter rye, sorghum-sudangrass hybrid and oat including of rape in Hwa seong-gun, Kyeonggido, from 1993 to 1994. Each crops were utilized from the stage of 8-leaves to late blooming for sorghum-sudangrass, and from final leaves to soft dough for winter rye and oat plant. Under three different cropping system of winter rye-sorghum x sudangrass, spring oat-sorghum X sudangrass-autumn oat, and silage corn-autumn oat, a succeshl hehage production was available for grazing performance from April 26 to December 15, continuously. Annual dry matter yields for grazing allowance were 26.1 tontha in average of all cropping system. Autumn oat rnixtured with rape showed the highest herbage utilization with 91.6% grazing intensity and the lowest in sorghum-sudangrass with a value of 60.6- 69.1 %. Labor investment for herbage production were 805 hour in the cutting management and 339 hour per hectar in the grazing utilization.

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2004년도 제58회 춘계유가공심포지움 - 세계 우유의 날 기념 국제 심포지움
• /
• pp.1-7
• /
• 2004

Dairy development in India has emerged as one of the modern India's most successful development programmes. India's White Revolution, which has quietly swept the country during the past few decades, deserves attention equal to that given to the better known Green Revolution. India has become the largest milk producer in the world. From being a major importer of dairy products in the 1950s, India has now become an exporter. The strength of lndian dairy sector lies in the fact that despite of limited investment, it has shown consistent and sustainable growth. Presently India ranks first in the World milk production with 88.02 million tones (2002 03) with an annual growth rate of 4.2 per cent. Planning Commission estimates that by the end of Xth Plan, milk production may touch 100 million tones.

• 한국항해항만학회지
• /
• 제30권4호
• /
• pp.303-308
• /
• 2006

This study is designed to analyze the production, employment, value added and income impacts tha, in the event of designation and development of Haeundae as 'Convention, Movie, Marine Leisure Special Zone', its marine sector would have on the local economy. The realization of marine leisure special zone of Haeundae in Busan is expected to lead to a direct and indirect investment of approx. \13.6 billion, resulting in \68.0 billion in production impact, 850 jobs in employment impact, \28.0 billion in value added impact and \14.5 billion in income impact. This is expected to give a boost to a stagnant local economy, offering opportunities for the revival of Busan's tourist industry.

• 산업공학
• /
• 제13권2호
• /
• pp.217-224
• /
• 2000

This paper analyzes the effects of setup cost reduction in a dynamic lot-sizing model for a single-facility multi-product problem. In the model, demands for each product are known, no backlogging is allowed, and a single resource is employed. Also, setup cost is defined as a function of capital expenditure to invest in setup cost reduction. Furthermore, in each production period the facility (or plant) produces many products, each representing a fixed part of the involved production activity (or input resource quantity). In this paper, the structure of the optimal solution is characterized and an efficient algorithm is proposed for simultaneously determining the optimal lot size with reduced setup cost and the optimal investment in setup cost reduction. Also, the proposed algorithm is illustrated by a numerical example with a linear and an exponential setup reduction functions.

• 농촌지도와개발
• /
• 제25권4호
• /
• pp.175-184
• /
• 2018

There are two main types of agricultural extension projects in Korea, the impacts and routes of each type on farm income are different. This paper empirically studies the impact of agricultural extension to farms' income, using Multi-level production function considering time lag. It is found that direct type of extension has positive effect to farms' income. Also indirect type on income is significant only when the level of education is high. Due to the characteristics of Korean agricultural structure, the technical level of farm is greatly influenced by the government's R&D investment and technology guidance. The result implies that indirect type of extension that take into account the educational level of farms should be emphasized for long-term technological advances.

• 산업융합연구
• /
• 제13권1호
• /
• pp.1-9
• /
• 2015

The purpose of this Study is to analyze the economic effect of the project for the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area aimed at activation of R&D of companies within the Kumoh Technology Valley. As the result of the analysis, the investment of 56.837 Billion Won in the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area had the effect on production inducement valued at 133.582 Billion Won, effect on added value inducement valued at 41.764 Billion Won, effect on import inducement valued at 16.794 Billion Won and the effect on employment inducement numbered at 4,992 persons.try.