• Korean journal of food and cookery science
• /
• v.22 no.6 s.96
• /
• pp.747-755
• /
• 2006

This study evaluated the microbiological hazard of three Korean rice cake products (Gaepidduk, Injulmi, Julpyon). Microorganisms testing was conducted in various phases of the product flow of Korean rice cakes preparation, food equipment, environment work and cook employees at small scale. The results showed the presence of redbean paste, soybean powder and oil at levels as high as $10^5$ CFU/g on the hazard analysis of rice cakes ingredients. High levels of coliforms were detected in Julpyon products after 24 hr. and on the cooker's aprons. Clinical bacteria were not detected in any of the rice cakes. We concluded that there is a strong requirement for education related to personal hygiene for the production of hygienic rice cake products and for the publics health.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1271-1272
• /
• 2006

The vacuum infiltration method is one of the composite producing methods. There are several parameters in composite production by vacuum infiltration. One of them is particle size of reinforcement in particulate reinforced composites. In this study, MgO powder and Al were used as reinforcement and matrix respectively. MgO powders with different size and amount to give same height were filled in quartz tubes and liquid metal was vacuum infiltrated into the MgO powder under same vacuum condition and for same time. Infiltration height was measured and microstructure and fracture behavior of composite were investigated. It has been found that infiltration height and fracture strength were increased with particulate reinforcement sizes. It has also been determined that molten metal temperature facilitates infiltration.

• Korean Journal of Agricultural Science
• /
• v.44 no.3
• /
• pp.424-439
• /
• 2017

This study was undertaken to examine the profit efficiency and its determining factors, the investment opportunity, and the challenges of shea butter producers in the northern region of Ghana. The methods employed in this research were the Stochastic Profit Frontier (SPF) model, gain-cost and investment return analyses, as well as Kendall's W statistic using primary data collected from 120 purposively-selected respondents. Results from the analysis indicated that profit efficiency was positively influenced by sex, household size, marital status, educational level, transportation cost, store rent, and price of shea nut with a gain in profit efficiency of 58.5%. The investment analysis demonstrated a net gain per person of $8,077 equivalent to GH₵ 28,270 Ghanaian cedi (GH₵) using 2016 exchange rate (GH₵ 3.5 = $1). Among the challenges identified, the poor quality of shea nuts was the most prioritised challenge with 72.8% agreement among the respondents. Based on these findings, it was recommended that proper training and education, as well as improvement in shea nut quality, should be promoted to improve the profit efficiency of shea butter producers.

• YAKHAK HOEJI
• /
• v.51 no.6
• /
• pp.424-429
• /
• 2007

The demand for pharmaco-economic data has increased since the introduction of positive list system for drug insurance. A survey was conducted for pharmaceutical companies, universities and hospitals to find the current states and barriers for pharmaco-economic studies in Korea. The results showed that even those who are in charge of pharmaco-economic studies at companies/universities had a limited technical expertise. Government should pay more attention to the education of the relevant manpower, and the production of national statistics needed for economic evaluation.

• 전자공학회논문지 IE
• /
• v.45 no.4
• /
• pp.42-46
• /
• 2008

LED's production does Die bonding and Wire bonding on L/F board, and do epoxy dispensing to protect LED Chip and improve brightness. In this paper, we propose and realize a x-y-z axis robot mechanism detecting automatically eopxy's amount being filled, control data of pressure and time by the quantity automatic revision, and epoxy of the schedule amount dispensing.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.39-47
• /
• 2007

An industrial injury prevention has a basis on fundamental spirit of human respect rather than only injury prevention in company. The employer should recognize employee as a core part of an industrial management and use as a starting point of safety and health management rather than means of production. There are many reason for unsafety action without safety operation. The reason is no standard safety operation in company or the workers never get a enough education. Standard safety operation is prepared by paper for accurate directions and orders and operators must read the paper to prevent an error of action. Also an essential particular is safety of equipment and machine must be assumed to establish standard safety operation then safety of operations will be possible.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.109-114
• /
• 2005

The founding purpose of Business Incubation System is to induce those businessmen who have technology and promising business ideas but are lacking fund, information, and management skill, and to speed up their business establishment and enhance the level of success by providing them with managerial knowledge, production technology, design, and equipment. While some universities made Business Incubation Center to achieve the above purpose, some other universities, especially the local ones, believed that Business Incubation Center, if managed successfully, could be an accelerator picking up the sluggish local economies. This study studied the motivators that let them move in an Incubating Center, their request for support, their level of expert utilization, and the role of head of a Center. This study found a significant level of correlation among the variables such as industrial-educational cooperation, the development of common items, utilization of professors with matching majors, utilization of research professors, and transfer of technology.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.2
• /
• pp.55-58
• /
• 2008

The objective of the research is to design, manufacture and test a Mass Flow Controller(MFC) capable of measuring compressible fluid flows based on a "bucket and stop-watch"method. The basic principle is the measurement of time, where the time taken to fill and empty a bucket of known volume is measured. This method of flow measurement is a new concept when compared to a commercilized current mass flow controller. For the flow meter to be able to compete with established designs it not only must be comparable in cost and robustness, it must be very accurate and reliable as well. This device should be able to handle fluid flows in the range of 0.1ml/min to 10ml/min within an accuracy of ${\pm}$1%. A possible application for a device such as this is in electronics industry where arsenic gas is used in the production of silicon chips.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.279-284
• /
• 1995

In CAI, it is very important to evaluate the grade of understanding which students reach about the scope of problem which students are studying. In this paper, to find out students' learning achievement, we make students reply to test which the system presents and then lead evaluation result using fuzzy number about answer result. Besides, we define the degree of prior knowledge of studentsd as conditioned fuzzy number and use existing fuzzy accuracy production function begore the stage of using fuzzy number, Next, we apply conditioned fuzzy number to accuracy degree of answer produces by this function. Through this, we come to the conclusion that evaluation result as to the same answer result is changed according to the degree of prior knowledge about the scope which students are studying.

• Journal of Korea Foundry Society
• /
• v.29 no.3
• /
• pp.138-143
• /
• 2009

Vacuum suction is applied to the mold during pouring in the inclined gravity die casting to remove defects such as misrun and gas porosity in the brake master cylinder. Casting defects are observed after solidification and their cause is analyzed by using the calculated results with commercial solidification and flow analysis code(ZCAST). The optimum vacuum suction is -2 cmHg, and when the start time of vacuum suction is 3 seconds after pouring, better filled result is obtained by holding it for 15 seconds. Reproducibility test under the optimum conditions attained from the above pouring tests is performed, and it is confirmed that these pouring conditions can be applied to the mass production immediately.