• Asia Marketing Journal
• /
• v.2 no.2
• /
• pp.86-113
• /
• 2000

본 연구는 환경지향제품구매와 재활용행동을 설명하기 위한 것으로 Schwartz 가 제기한 규범이론에 관한 이론고찰과 실증분석을 병행하고 있다. 규범이론의 핵심은 사회규범을 개인의 행동으로 전환시키는 과정을 설명하는 것이다. 규범이론에 따르면 환경지향제품구매와 재활용과 같은 이타적 행동은 사람들이 일종의 추상적이고 객관적인 방식으로 동의하는 도덕적 행동에 관한 사회규범으로 시작된다. 그러나 사회규범은 행동을 지배하기에는 너무 일반적이고 소원하다. 따라서 이러한 사회규범은 개인적 차원에서 우리들 각 개인에게 적응되어 개인규범이 된다. 사회규범은 사회적 구조의 차원에서 존재하는 반면 개인규범은 강력하게 내면화 된 도덕적 태도가 된다. 개인이 규범을 내면화 했지만 이에 따라 행동하지 않을 수도 있는 데 상황에 적절하도록 개인규범이 정의되어야 한다. 규범이론은 주어진 상황에 적절하도록 사회규범을 개인규범으로 정의하도록 유도하기 위해서는 바로 행동결과지각과 책임귀인지각이 개입되어야 한다고 제기하고 있다. 본 연구는 이상의 규범이론에 근거하여 소비자의 환경지향제품구매행동과 재활용행동을 설명하고자 다음 세 가지 연구목적을 설정하였다. 첫째, 사회규범이 개인규범의 형성에 어떠한 영향을 미치는가? 둘째, 사회규범이 내면화 된 개인규범은 환경지향제품구매행동과 재활용행동에 직접적인 영향을 미치는가? 셋째, 규범이론은 조절변수가 개입되는 경우 개인규범이 행동으로 전환되는 것이 더욱 용이해진다고 제기한 바, 조절변수의 하나인 환경지향행동결과의 중요성지각의 영향을 검증하고자 한다. 연구결과, 환경문제가 개입된 상황에서 사회규범은 개인규범의 형성에 강한 영향을 미치며 개인규범은 다시 환경지향제품구매와 재활용행동에 영향을 미치는 것으로 나타났다. 그리고 환경지향행동결과의 중요성지각 역시 개인규범이 환경지향제품구매행동으로 전환되는 과정에서 조절적 역할을 함으로서 양변수간 관계를 더욱 강화하는 변수임을 연구결과는 제시하고 있다. 그러나 개인규범-재활용행동사이에서의 조절적 역할은 없는 것으로 나타났다.

• Fashion & Textile Research Journal
• /
• v.25 no.6
• /
• pp.673-689
• /
• 2023

To realize the traceability of sustainable textile products, this study presents a low-carbon process through energy savings in the textile material manufacturing process. Traceability is becoming an important element of Life Cycle Assessment (LCA), which confirms the eco-friendliness of textile products as well as supply chain information. Textile products with complex manufacturing processes require traceability of each step of the process to calculate carbon emissions and power usage. Additionally, an understanding of the characteristics of the product planning-manufacturing-distribution process and an overall understanding of carbon emissions sources are required. Energy use in the textile material manufacturing stage produces the largest amount of carbon dioxide, and the amount of carbon emitted from processes such as dyeing, weaving and knitting can be calculated. Energy saving methods include efficiency improvement and energy recycling, and carbon dioxide emissions can be reduced through waste heat recovery, sensor-based smart systems, and replacement of old facilities. In the dyeing process, which uses a considerable amount of heat energy, LNG, steam can be saved by using "heat exchangers," "condensate management traps," and "tenter exhaust fan controllers." In weaving and knitting processes, which use a considerable amount of electrical energy, about 10- 20% of energy can be saved by using old compressors and motors.

• Journal of Fashion Business
• /
• v.28 no.3
• /
• pp.1-15
• /
• 2024

Christopher Nemeth is a designer who combines characteristics of a pioneering upcycle design and deconstructionist design with fabrics, waste clothing, and pieces of fabric recycled in the 1980s. By hommaging his work from the Louis Vuitton 2015 F/W collection, Kim Jones is once again becoming a source of design inspiration in an era where upcycling fashion is attracting attention. Accordingly, an upcycling design approach might appeal to the MZ generation. Christopher Nemes' design presented in this study as a representative fashion designer of dismantling upcycling is basically based on dismantling. It can also be interpreted as dismantling upcycling design because it uses used clothing, waste clothing, and discarded fabrics as materials. This study examined main techniques of upcycling fashion design and derived characteristics of Nemes design as "deconstructive techniques using free lines of construction," "recycling upcycling vintage materials and clothing accessories," and "using handcrafted techniques of artistic sensibility." By applying Nemes' dismantling upcycling technique, four designs were developed for men's top and bottom sets for targets in their 20s and 30s to suggest the commercialization possibility. This study is meaningful in that it proposes a methodical alternative to the new deconstructionist upcycling design that can show Nemes' aesthetic characteristics, creative perspective, and personality by modernly reinterpreting the deconstructionist upcycling technique extracted through analysis of fashion designer Christopher Nemes' design. In particular, by actually producing the work and confirming whether the design technique can be implemented, the value as a fashion product that can be sold is realized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.294-301
• /
• 2017

In this study, we found the optimal manufacturing conditions of livestock manure sludge RDF with the oil-drying method. We performed oil evaporation, oil drying and pelletizing of the sludge to evaluate the value of the product (sludge RDF), and measured the performance of the product using calorimeter and PXRF equipment. Also, we conducted the calorie comparison test between sludge RDF manufactured in this study and wood RDF generally used in the field. Experimental results showed that 30g of the sludge treated by vegetable oil at $130^{\circ}C$ for 25 minutes were the optimal conditions to make the sludge RDF (considering the aspects of eco-friendly and mass production). The caloric value of the sludge RDF manufactured in this study was 5211kcal/kg which is higher than that of wood RDF used widely in the market. Finally, PXRF results showed sludge RDF contains no heavy metals with the exception of sulfur. Therefore, we recommend more study about the sulfur control process for future development of the industrial manufacturing process.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.115-131
• /
• 2007

By the turn of the century, our society has been gradually more interested in environmental problems than any other time. Ecological change spurred by industrial pollution is occurring beyond the borders of nations, and has emerged as a global issue. Such change is resulting in exhaustion of natural resources and energy, and serious climatic change. In this study, main focus regarding the process of the fashion product design system was placed on the sustainable fashion design of organic cotton as a positive and alternative suggestion. It is expected that the results of this study contribute to the fashion design planning not only for future generation but also for the present time. This study researched on brands that produced their fashion products using organic cotton. The following cases proved to possess sustainability in their product system. The results of this study can be summarized as follows: Firstly, sustainable design in organic cotton products has been a progressive ere-design in 2000s. It is mainly focus concerned with recycling and re-use of materials to protect environment. It is not chemical dependant and takes a particular care in eliminating waste water and energy in the dyeing process. It is an environmentally sustainable design better than all the other design processes. Secondly, it is a design that cares for the common good of society and the global system of fair trading. The fair trading of organic cotton products induced a change in the structure of production system, while defending human rights. It also gave benefits by promoting development in local society and progress in traditional skills. Not to mention that it contributed to building up the concept of transparency in the global economic system. Lastly, the brands emphasize their social responsibility and management ethics to observe environmental policy which is established to protect our nature and people. Their public information reminds customers of the importance of protecting the environment from diverse pollution. Moreover, they hold social events to promote public awareness for environmental Issues. This study dealt only with the organic cotton, a small subset of the subject of sustainable design. It can be extended and applied to various other sustainable fashion design as a solution for global environmental issues.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.927-935
• /
• 1998

The purpose of this study is to investigate the changes of mechanical properties and surface topography of various nickel titanium wires after heat sterilization for recycling with quantitative method. The materials used were four kinds of nickel titanium orthodontic wires including a Korean product. Experimental specimens were treated with two kinds of heat sterilization methods ; dry heat ($180^{\circ}C$, 60min) and autoclave ($121^{\circ}C$, 15-20psi, 30min). Mechanical properties were evaluated by tensile test with Instron 4466 (load cell capacity:.1000 kg, cross head speed:5mm/min, grip distince:40mm in room temperature). Surface topography of various wires was compared with each other qualitatively by using scanning electron microscopy and quantitatively by using profilometer. The findings were analyzed statistically with student t-tests. The results were as follows; 1. Neither method of heat sterilization had any effects on tensile properties of the nickel-titanium wires used in this experiment. 2. Before heat sterilization, the surface smoothness was highest in Optimalloy, followed by Align and Sentalloy, with NiTi showing the lowest smoothness value. 3. In surface topography, Align and Optimalloy were not influenced by heat sterilization. NiTi, on the other hand, had increased roughness after dry heat sterilization and Sentalloy showed the same tendency after each of the two heat sterilization procedures.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.597-601
• /
• 2006

There are considerable amount of man power and time spent for analysis and selection of various materials due to the inadequate application system and rapid searching process of material related information in each stage of building production process. Also, due to the insufficiency in recycling system of important information created for each process, they are hoarded at each task stage and project completion. As a result, because of the repetition of the similar/identical tasks on each process, it is the major reason for impeding the efficient employment of manpower of the company and decreasing competition of the company. Moreover, in selecting finish material in the project field, there are many difficulties due to the lack of technical information such as product characteristics and field applications. The construction quality also affects the profit and loss of the product which calls for a need to develop continued information management system that the finish material related examples could be shared in real time. The objective of this study is to propose a building finish material information which the real time research and application is possible to raise the productivity. TO do this, the current material information task status analysis and questionnaire research should be conducted to understand the demand of system development and reflect the result onto the system for easy access and application. Therefore, the building finish material information system for enhancement of productivity of construction task proposed in this study is expected to be utilized in enhancement of construction quality, maximization of company profit, and strengthening of company competition.

• Clean Technology
• /
• v.10 no.2
• /
• pp.61-72
• /
• 2004

In this study, aqueous/semi-aqueous cleaning agents which consist of organic solvent, surfactant, cosurfactant, and water were developed by changing formulation parameters such as organic solvent type and contents, surfactant type and contents, and cosurfactant/surfactant(A/S) ratio, etc.. And physical properties and flux removal of the formulated cleaning agents have been evaluated. Also, the performance of oil-water separation from the rinse water contaminated during the cleaning process was evaluated for its recycling. The formulated cleaning agents in this work expected to have good penetration because of their low viscosity and low surface tension values of 30.2~32.5 dyne/cm. The flux removal with the terpene type cleaning agent was higher than that with hydrocarbon type cleaning agent and two commercial products (CPA(commercial product A), CPB(commercial product B)). And the performance of oil-water separation by gravity settling from the rinse water contaminated with formulated cleaning agent and soils was shown to be very good. The cleaning agents developed in this work were applied to surface mounting technology(SMT) cleaning process for manufacturing electronic parts at L electronic company. As a result, the newly developed cleaning agents showed two times better cleaning speed for removal of solder cream than the conventional ond containing ethanol and IPA(isopropyl alcohol). In addition, malodor and VOC problems generated by the previous organic cleaning agents have been solved in the manufacturing field through introduction of the non-volatile and environmental-friendly cleaning agents to the field.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.981-986
• /
• 2000

In the process of tuna for food, the unprocessed parts of the whole fish range from 30 to 35%, which are mostly used as animal feed stuff, and wasted. Thus, preliminary study on the recycling of the by-product was done to ultimately produce highly valuable products. The study was peformed on skin, skin flesh, tail flesh, dark flesh and abdominal flesh of the tuna. First, crude protein was the most abundant in the skin at 26.31%. About 21% of the crude protein were found in the other samples. Second, crude fat was greatly obtained in the skin at 15.58%. Interestingly, only 0.75% of crude fat was found in the dark flesh. Third, vitamin C and vitamin B group were highly measured in the abdominal flesh and the dark flesh, respectively. Importantly, docosahexaenoic acid (DHA, C22 : 6 $\omega$ -3) and eicosapentaenoic acid (EPA, C22 : 6 $\omega$ -3) which are highly unsaturated fatty acids, were abundant in the skin and skin flesh. To determine the effect of high temperature to the unprocessed parts, the samples were exposed to steam for 30 min. After this processing, 15-methylhexadecanoic acid (i-17 : 0) were in- creased in the skin flesh and the dark flesh. Furthermore, 3-hydroxytetradecanoic acid (3-OH 14 : 0), heptadecanoic acid (17 : 0), 2-hydroxyhexadecanoic acid (2-OH 16 : 0) and nonadecanoic acid (19 : 0) hat were not found before with steam were detected. The DHA and EPA in the dark flesh and the DHA in the skin were stable, respectively, even after the treatment.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.623-646
• /
• 2021

As the demand for electric power increases with acceleration of electrification at home and abroad, the needs for coal-fired electrical power plant are accordingly increased. However, these coal-fired electrical power plants induce also many environmental problems such as increase of air pollutants, increase of possibility of land contamination by reclamation of coal ash, even though these power plants have a good economical efficiency. In case of a by-product of coal-fired electrical power plants, only 70% of them are recycled and the remaining 30% of by-product are fully buried in surrounding ground. Consequently, this study deals with coal ash backfilling mechanism in abandoned mine openings for the purposes of increasing the coal ash recycling rate as well as securing the mine area stability. In order to analyze the backfill and ground reinforcement by interaction between rock mass and backfills, the copying samples of discontinuous surface with different roughnesses were produced for bond strength tests and direct shear tests. And statistical analysis was also conducted to decide the characteristics of bond and shear behavior with joint roughness and their curing day. Numerical simulations were also analyzed for examining the effect of interface behavior on ground stability.