• The Journal of Art Theory & Practice
• /
• no.5
• /
• pp.25-41
• /
• 2007

Despite continuous efforts to redraw the boundaries between art and culture, the conventional concept of originality has persisted in approaches to the practice of contemporary art. In the discourse of originality, various forms of lesser arts that employ the method of replication have been referred to as kitsch, or "rear-guard," the opposite of avant-garde. This categorization points to the contested issue regarding the oppositional relation between modernism and mass culture. With its easily accessible content and financial affordability, mass culture has become both an irresistible attraction and a most powerful threat to modernism. This threat has instigated a discursive system that has situated mass culture as a cultural other of modernism. Taking the marginalized category of kitsch as the area of contention, this paper examines a discursive repression of kitsch. It analyzes the conceptual framework that defends originality and autonomy in art and, conversely, degrades kitsch as an inferior and dangerous cultural category. Greenberg'S concept of kitsch as a by-product of industrialization evolved into the criticism that advocates the autonomy of art. The Frankfurt School scholars, particularly Theodor Adorno and Max Horkheimer, practiced comparable cultural critiques. Focusing on mass culture such as film, radio, and television, instead of art works, they critically analyzed the system of mass culture and theorized the negative implications of the ubiquitous presence of kitsch. Some critics, on the other hand, perceived the growth of mass culture as opening possibilities in cultural development. Walter Benjamin and Harold Rosenberg asserted the socio-cultural dynamics of mass culture underlining the potential for continual transformation in reality and in the subject. They acknowledged that technological advances changed the condition of creation and enabled unmediated interactions between media. By scrutinizing conflicting views on kitsch, this paper intends to reassess arts that draw "the forces of the outside."

• The Research Journal of the Costume Culture
• /
• v.29 no.3
• /
• pp.307-327
• /
• 2021

This study analyzed the effects of fashion consumers' moral identity and empathy propensity on ethical consumption attitude and donation behavior, and the effect of ethical consumption attitude on donation behavior. The survey was conducted on consumers over the 20s who experienced the donation of fashion products, 384 responses were used for data analysis. The result showed that the internality and symbolism of moral identity had a positive effect on ethical consumption attitudes. The all factors of empathy propensity positively affected eco-friendly oriented consumption, and cognitive empathy and social empathy positively affected boycott oriented consumption. The cognitive empathy, social empathy and relational empathy positively affected community oriented consumption and practice oriented consumption. Furthermore, social empathy and relational empathy positively affected recycling oriented consumption. The eco-friendly, boycott, community, and recycling oriented consumption positively affected temporal donation. The all factors of ethical consumption attitude positively affected emotional donation, and eco-friendly, community, recycling, and practice oriented consumption positively affected material donations. The internality and symbolism of moral identity positively affected temporal and emotional donation, and the symbolism except internality positively affected material donation. The cognitive empathy, social empathy and relational empathy positively affected the temporal donation and material donation. In addition, the all factors of empathy propensity positively affected emotional donation. The results of this study will contribute to the ethical product strategy, marketing, and sustainable development of the fashion industry.

• Journal of Korean Society for Quality Management
• /
• v.31 no.4
• /
• pp.184-193
• /
• 2003

PL has been developed centering around England and America. Recently many countries are introducing PL system changing the world a single economic bloc based on the rapid development of Technology and Economy. This paper is studied with related literatures and theses, organizational consulting cases within the framework of the firm as the central operating bodies of PL system. In the past, Some papers about System Integration which was operated as a same Certificate System and enacted in a single organization, was studied and presented. But most of papers was a theoretical study related model and conception. In this situation Government supports PSMS of a single system at government expense to 100­200 companies for improving organizational confrontation ability of PL this year. This paper proposed a design and effect of Integration system model based on the analysis of ISO 9001：2000, KS, PSMS and ISO 14001. The integrated system has the following three distinctions. Firstly, KS is a national establishment, national leading certification and forcing standard. Secondly, ISO 9001：2000 and ISO 14001 are an international organization's establishment, non­official certification and optional standard. Finally, PSMS isn't a national law and forcing matter. And it isn't the concept of certification but the operational system by itself. Also if a lawsuit by defect is happened, it is very dangerous. This paper, which is integrated by four management systems and has many consulting cases, is the first in this department and is different from others. Also If people has the basic knowledge about management system, they can directly connect it to the organizational system according to this paper's guidance. It is very good result in this study because the law of PL is executed now.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.3
• /
• pp.207-215
• /
• 2008

Drug approval-patent linkage is the practice of linking drug marketing approval to the patent status of the originator's product and not allowing the grant of marketing approval to any third party prior to the expiration of the patent term unless by consent of the patent owner. Article 18.9.5 of Korea-US Free Trade Agreement requires that Korea introduce the linkage system in drug marketing approval. However, Korea is unfamiliar with the linkage system. In addition, there have been lots of arguments over the impacts of this system on Korean pharmaceutical industry and pharmaceutical market in the future. This report investigated the linkage systems of the US and Canada. The US and Canada have implemented drug approval-patent linkage system since 1984 and 1993, respectively. Both countries have patent lists for drug approvalpatent linkage on which originators are required to list patents on substance, product, and use of their drugs. Generic or follow-on drug applicants must contain a certification regarding each patent listed that relates to the referenced drug. If the patent holder files suit for patent infringement within 45 days of notice of application, drug approval is not allowed for several months - 30 months in the US and 24 months in Canada. Both countries have amended their systems after having experienced unexpected results such as listing improper and additional patents, multiple patent litigations and delayed generic entries. After reviewing the US and Canada's experiences, we suggested three principles needed in implementing the system: protecting patent holder's right; promoting generic drug development and marketing; monitoring the process and the effect of the system.

• Journal of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.406-413
• /
• 2001

Up to this day, reinforced spun concrete pipes have been widely used as drain pipes. However, many reinforced spun concrete pipes are exposed to the deteriorated environment such as freezing-thawing damage and chemical attack by the growth of a sulfur-oxidizing bacterium isolated from corroded concrete. The purpose of this study is to evaluate the effects of lining by polymer-modified mortar using polymer dispersions as cement modifier on the development in durability of reinforced spun concrete pipe. The polymer-modified mortars were prepared with various polymer types and polymer-cement ratios, and tested for compressive and flexural strengths, acid, freezing-thawing, and heat resistances. And then, the reinforced spun concrete pipe product lined by polymer-modified mortars was tested for adhesion in tension and surface conditions according to curing temperatures in the field. From the test results, it is apparent that the polymer-modified mortars have good mechanical properties and durability as a lining material. In practice, all polymers can be used as lining the materials for reinforced spun concrete pipe, and types of polymer, and polymer-cement ratio and curing conditions are controlled for a good lining product.

• Smart Structures and Systems
• /
• v.20 no.3
• /
• pp.303-309
• /
• 2017

Structural control through seismic isolation using elastomeric rubber bearing, which is also known as High Damping Rubber Bearing (HDRB), has seen an increase in use to provide protective from earthquake, especially for new buildings in earthquake zones. Besides, HDRB has also been used in structural rehabilitation of older yet significant buildings, such as museums and palaces. However, the present design approach applied in normal practice has often resulted in dissimilar HDRB dimension requirement between structural designers and bearing manufacturers mainly due to ineffective communication. Therefore, in order to ease the design process, most HDRB manufacturers have come up with catalogs that list all necessary and relevant product lines specifically for structural engineers to choose from. In fact, these catalogs contain physical dimension, compression property, shear characteristic, and most importantly, the total rubber thickness. Nonetheless, other complicated issues, such as the relationship between target isolation period and displacement demand (which determines the total rubber thickness), are omitted due to cul-de-sac fixing of these values in the catalogs. As such, this paper presents a formula, which is derived and extended from the present design approach, in order to offer a simple guideline for engineers to estimate the required HDRB size. This improved design formula successfully minimizes the discrepancies stumbled upon among structural designers, builders, and rubber bearing manufacturers in terms of variation order issue at the designing stage because manufacturer of isolator is always the last to be appointed in most projects.

• The Journal of the Korean dental association
• /
• v.50 no.9
• /
• pp.544-551
• /
• 2012

Dental caries is a biofilm-related oral disease, and continues to afflict the majority of the world's population. Although fluoride, delivered in various modalities, remains the mainstay for the prevention of caries, additional approaches are required to enhance its effectiveness. Natural products have been used as a major source of innovative and effective therapeutic agents throughout human history, and have shown promise as a source of components for the development of new drugs. In addition. studies using natural products to prevent or treat oral diseases such as dental caries have received a great deal of attention. A number of compounds, such as epicatechin, allicin and sanguinarine, isolated from natural products, have also been investigated for their efficacy against oral microbial pathogens. However, the use of natural products as an anti-caries agent in clinical practice was controversial because of inadequate knowledge concerning their mechanisms of action and chemical characterization. This study focuses on the current knowledge of natural products in dental caries prevention and suggests natural products are importance sources for the prevention of dental caries.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.1
• /
• pp.8-17
• /
• 2008

Putting a high value on individual preferences is a modern trend that more and more companies are considering for their product design and development and the apartment design is not an exception. Most apartments today are built using similar design with no room for customization. People in general want their tastes to be reflected in the design of their apartment. However, delivering what customers like to the construction company may not be an easy task in practice. For this reason, an intuitive and effective medium between the company and customers for effective communication is needed to ameliorate such a difficulty and in response to this necessity, we developed a test platform for the virtual model house which provides a user with the customization of the apartment using haptic interactions. In our virtual environment, a user can explore an apartment and change the interior based on their taste and feel through intuitive haptic interactions.

• Journal of Mechanical Science and Technology
• /
• v.16 no.9
• /
• pp.1054-1064
• /
• 2002

Numerical prediction of welding-induced residual stresses using the finite element method has been a common practice in the development or refinement of welded product designs. Various researchers have studied several thermal models associated with the welding process. Among these thermal models, ramp heat input and double-ellipsoid moving source have been investigated. These heat-source models predict the temperature fields and history with or without accuracy. However, these models can predict the thermal characteristics of the welding process that influence the formation of the inherent plastic strains, which ultimately determines the final state of residual stresses in the weldment. The magnitude and distribution of residual stresses are compared. Although the two models predict similar magnitude of the longitudinal stress, the double-ellipsoid moving source model predicts wider tensile stress zones than the other one. And, both the ramp heating and moving source models predict the stress results in reasonable agreement with the experimental data.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.337-364
• /
• 2009

Trade remedy is the system that additional duty or import quantity restriction would be imposed on the import products, in case that unfair imports damage domestic industry or even proper import products damage significantly domestic industry. The system is secured by the act of unfair trade practice investigation & industrial damage remedy, tariff act, WTO agreement. Anti-dumping duty act is the system that duties are assessed with the equal or less amount of the difference between normal transaction price and dumping price, in case that the product imported under dumping price causes or may cause damages in domestic industry, or the development of domestic industry should be delayed practically. Recently, the problems related with anti-dumping duty imposed as the part of the trade remedy occur frequently. It is necessary to discuss whether the anti-dumping duty act is practically trade remedy which does comply with GATT regulations and WTO agreements as the criteria of international law and is in line with the intent of domestic act in the suffered country, or it does return to protective trade or reduce the protection of consumer. On the basis of this discussion, it would be difficult to impose the antidumping duty on industrial products in order to protect domestic industry, when considering the expected free trade agreements of Korea-US, Korea-China and Korea-Japan. In order to survive under the current severe competition of world trade market, companies should raise the competitiveness by themselves without relying on the current trade acts to provide with a certain protection. This thesis should bring those attentions.