• Title/Summary/Keyword: Product code

Search Result 481, Processing Time 0.027 seconds

Analysis of Quality Change Based on Storage Conditions to Set the Use-by date of Bakery Breads (베이커리 식빵의 소비기한 설정을 위한 보관 방법에 따른 품질 변화 연구)

  • Sun Hye Hwang;Ji Yeon Choi;Min Joo Kim;Yong Sun Cho
    • Journal of Food Hygiene and Safety
    • /
    • v.38 no.4
    • /
    • pp.236-245
    • /
    • 2023
  • In this study, the quality safety limit period of seven types of bakery bread was analyzed, and their use-by date was calculated. For evaluating product quality, storage conditions were set as 5, 15, 25, and 35℃ for 50 days, and moisture, microorganisms, sensory characteristics, and dominant bacteria were examined. The quality and safety standards followed the Korea Food Code and Korean industrial standards (KS). The results showed that all products stored at 5℃ satisfied the standard for bacterial count for day 50, but the sensory quality was below the standard level. Samples stored at 15℃ showed high variability from 3-39 days. At 25℃, a quality safety limit period of 2-20 days was set, and one sample was found to have the same shelf life. Bread stored at 35 ℃ had the shortest quality safety limit period. Considering a safety factor of 0.87, a use-by date period of 1.7-13.1 days was calculated. Therefore, setting the use-by date according to the product type is necessary, even for the same product category. Among the bread products sold in bakeries, those managed as room temperature products (1-35℃) can be distributed and stored in a temperature range of up to 35℃. Overall, this study demonstrates the importance of setting a quality retention period based on the product characteristics and carefully considering the safety factor.

Practical Connector Patterns for Designing Component Frameworks (컴포넌트 프레임워크 설계를 위한 실용적인 커넥터 패턴)

  • 민현기;김수동
    • Journal of KIISE:Software and Applications
    • /
    • v.31 no.1
    • /
    • pp.43-53
    • /
    • 2004
  • Component-based development(CBD) has acquired a substantial acceptance in both academia and industry as an effective inter-organizational reuse technology. A component framework in product line engineering(PLE) which consists of related components, connectors and their semantics has a greater potential for reusability than components. In frameworks, components are glued with association, dependency and connections. Problems occur like affecting the implementation code of components when they are glued and replaced because the association and dependency relationships between COTS components which are acquired for application development do not match exactly. Especially, a connector may not only connect related components, but also mate partially-matched COTS components fit together. However, little has been studied to date about connectors that can be used practically. In this paper, we present a meta-model for connectors and show how a connector can be designed and implemented in practice. We propose five main patterns of connectors. Proposed major patterns Provide design guidelines for practical and efficient connector configuration based on component framework. And also, applying techniques and applied case studies of the major patterns show greatly increased applicability and reusability of the component without component modification.

A Model-based Performance Study of the EPCglobal Network (모델 기반 EPCglobal 네트워크의 성능 분석)

  • Kang, Yong-Shin;Son, Kyung-Won;Lee, Yong-Han;Rhee, Jong-Tae
    • IE interfaces
    • /
    • v.24 no.2
    • /
    • pp.139-150
    • /
    • 2011
  • The EPCglobal Network is a computer network used to share product data among trading partners. It provides the supply chain with improved visibility and traceability by using Electronic Product Code (EPC), which is stored on an RFID tag. Although this network model is widely accepted as a global standard and the growth of EPCglobal-subscriber base is considerable, the EPC technology adoption process is still in its infancy. This is because some of the critical issues on this model still remain to be verified such as scalability, data management, security, privacy and the economic value of data sharing. In this paper, we focus on scalability issue among the challenges to overcome and we regard performance of the EPCglobal Network only as a track and trace query-processing cost in the network. We developed performance models consisting of three elements of the EPCglobal Network : Discovery Services (DS), EPC Information Services (EPCIS), Object Naming Services (ONS). Then we abstracted out the track and trace query execution model to evaluate performance of the overall EPCglobal Network. Finally using the proposed models, we carried out simulation analysis based on an RFID-based inbound logistics process of automobile parts. This work is an important step towards the EPC technology diffusion and provides guidelines for businesses looking to buy or build the EPCglobal Network-based systems.

A Study on Efficient CNU Algorithm for High Speed LDPC decoding in DVB-S2 (DVB-S2 기반 고속 LDPC 복호를 위한 효율적인 CNU 계산방식에 관한 연구)

  • Lim, Byeong-Su;Kim, Min-Hyuk;Jung, Ji-Won
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.9
    • /
    • pp.1892-1897
    • /
    • 2012
  • In this paper, efficient CNU(Check Node Update) algorithms are analyzed for high speed LDPC decoding in DVB-S2 standard. In aspect to CNU methods, there are some kinds of CNU methods. Among of them, MP (Min Product) method is quite often used in LDPC decoding. However MP needs LUT (Look Up Table) that is critical path in LDPC decoding speed. A new SC-NMS (Self-Corrected Normalized Min-Sum) method is proposed in the paper. NMS needs only normalized scaling factor instead of LUT and compensates the overestimation of MP approximation. In addition, SC method is proposed. It gives a faster convergence toward a decoded codeword. If a message change its sign between two iterations, it is not reliable and to avoid to propagate noisy information, its module is set to 0. The performance of SC-NMS has a little degrade compare to MP by 0.1 dB, however considering computational complexity and decoding speed, SC-NMS algorithm is optimal method for CNU algorithm.

The method of grouping query based on EPCIS to improve the RFID application performance in EPC Network (EPC Network 기반 RFID 응용 시스템의 성능 향상을 위한 EPCIS 주소별 그룹 질의 기법)

  • Park, Sung-Jin;Kim, Dae-Hwan;Son, Min-Young;Yeom, Keun-Hyuk
    • The KIPS Transactions:PartD
    • /
    • v.18D no.2
    • /
    • pp.111-122
    • /
    • 2011
  • These days RFID application has been developed rapidly. It has been applied to many business areas such as logistics and supply chains. The Electronic Product Code (EPC) Network Architecture, an open global standard, is proposed by EPCglobal for developing RFID enabled systems. People who want to obtain the product information which are master information and event information have to apply with EPC Network Architecture. However, EPCIS which has master information and event information has to be accessed base on each EPC. Therefore, there is lots of duplicate accessing to EPCIS because RFID application has to access the same EPCIS over again which makes all performance down in EPC Network. This paper proposes how to reduce access times to EPCIS using EPC grouping based on EPCIS address. We build EPC Network environment to experiment about performance of RFID application system and we prove the improvement of EPC Network. Our result shows the reducing the EPCIS communication time by maximum 99 percentages.

RADIOLOGICAL DOSE ASSESSMENT ACCORDING TO METHODOLOGIES FOR THE EVALUATION OF ACCIDENTAL SOURCE TERMS

  • Jeong, Hae Sun;Jeong, Hyo Joon;Kim, Eun Han;Han, Moon Hee;Hwang, Won Tae
    • Journal of Radiation Protection and Research
    • /
    • v.39 no.4
    • /
    • pp.176-181
    • /
    • 2014
  • The object of this paper is to evaluate the fission product inventories and radiological doses in a non-LOCA event, based on the U.S. NRC's regulatory methodologies recommended by the TID-14844 and the RG 1.195. For choosing a non-LOCA event, one fuel assembly was assumed to be melted by a channel blockage accident. The Hanul nuclear power reactor unit 6 and the CE $16{\times}16$ fuel assembly were selected as the computational models. The burnup cross section library for depletion calculations was produced using the TRITON module in the SCALE6.1 computer code system. Based on the recently licensed values for fuel enrichment and burnup, the source term calculation was performed using the ORIGEN-ARP module. The fission product inventories released into the environment were obtained with the assumptions of the TID-14844 and the RG 1.195. With two kinds of source terms, the radiological doses of public in normal environment reflecting realistic circumstances were evaluated by applying the average condition of meteorology, inhalation rate, and shielding factor. The statistical analysis was first carried out using consecutive three year-meteorological data measured at the Hanul site. The annual-averaged atmospheric dispersion factors were evaluated at the shortest representative distance of 1,000 m, where the residents are actually able to live from the reactor core, according to the methodology recommended by the RG 1.111. The Korean characteristic-inhalation rate and shielding factor of a building were considered for a series of dose calculations.

Structural Integrity Evaluation by System Stress Analysis for Fuel Piping in a Process Plant (공정플랜트 연료배관의 시스템응력 해석에 의한 구조 건전성 평가)

  • Jeong, Seong Yong;Yoon, Kee Bong;Duyet, Pham Van;Yu, Jong Min;Kim, Ji Yoon
    • Journal of the Korean Society of Safety
    • /
    • v.28 no.3
    • /
    • pp.44-50
    • /
    • 2013
  • Process gas piping is one of the most basic components frequently used in the refinery and petrochemical plants. Many kinds of by-product gas have been used as fuel in the process plants. In some plants, natural gas is additionally introduced and mixed with the byproduct gas for upgrading the fuel. In this case, safety or design margin of the changed piping system of the plant should be re-evaluated based on a proper design code such as ASME or API codes since internal pressure, temperature and gas compositions are different from the original plant design conditions. In this study, series of piping stress analysis were conducted for a process piping used for transporting the mixed gas of the by-product gas and the natural gas from a mixing drum to a knock-out drum in a refinery plant. The analysed piping section had been actually installed in a domestic industry and needed safety audit since the design condition was changed. Pipe locations of the maximum system stress and displacement were determined, which can be candidate inspection and safety monitoring points during the upcoming operation period. For studying the effects of outside air temperature to safety the additional stress analysis were conducted for various temperatures in $0{\sim}30^{\circ}C$. Effects of the friction coefficient between the pipe and support were also investigated showing a proper choice if the friction coefficient is important. The maximum system stresses were occurred mainly at elbow, tee and support locations, which shows the thermal load contributes considerably to the system stress rather than the internal pressure or the gravity loads.

Springback Analysis of the Front Side Member with Advanced High Strength Steel (고강도 강판을 적용한 프런트 사이드 멤버의 스프링백 해석)

  • Song J. H.;Kim S. H.;Park S. H.;Huh H.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2005.05a
    • /
    • pp.106-109
    • /
    • 2005
  • Springback is a common phenomenon in sheet metal forming, caused by the elastic recovery of the internal stresses after removal of the tooling. Recently, advanced high strength steels (AHSS) such as TRIP and DP are finding acceptance in the automotive industry because their superior strength to weight ratio can lead to improved fuel efficiency and assessed crashworthiness of vehicles. The major troubles of the automotive structural members stamped with high strength steel sheets are the tendency of the large amount of springback due to the high yield strength and the tensile strength. The amount of springback is mainly influenced by the type of the yield function and anisotropic model induced by rolling. The discrepancy of the deep drawn product comparing the data of from the product design induced by springback must be compensated at the tool design stage in order to guarantee its function and assembly with other parts. The methodology of compensation of the low shape accuracy induced by large amount of springback is developed by the expert engineer in the industry. Recently, the numerical analysis is introduced in order to predict the amount of springback and to improve the shape accuracy prior to tryout stage of press working. In this paper, the tendency of springback is evaluated with respect to the blank material. The stamping process is analyzed fur the front side member formed with AHSS sheets such as TRIP60 and DP60. The analysis procedure fully covers the binderwrap, stamping, trimming and springback process with the commercial elasto-plastic finite element code LS-DYNA3D.

  • PDF

A Study on the Comparison of Similarity between Master Manuals of Appraisal Program (감정대상 프로그램의 마스터 매뉴얼 유사성 비교에 관한 연구)

  • Chun, Byung-Tae;Lee, Chang-Hoon
    • Journal of Software Assessment and Valuation
    • /
    • v.15 no.2
    • /
    • pp.1-7
    • /
    • 2019
  • Program similarity analysis consists of substantial similarity and access. Substantial similarity is a judgment of how similarly the program source code is quantitatively. Access determines the degree of similarity by analyzing comments in the program or other contextual evidence. In the case of manuals, it may be the subject of legitimacy analysis. Manuals can be divided into three types as follows. First, a master manual is a document created during the development stage of a product. It is a user manual that contains all the functionality of the product and its derivatives. Second, the customer manual is a manual that is open only to the primary customer and orderer. Third, the user manual is a document that is applied to the final OEM production stage and is open to the end purchaser. In this paper, we compare the master manual seized from the suspect and the master manual provided by the suspect on the Internet. It then determines how similar this master manual is and includes the victim company's original and property values.

Ensuring Consumer Safety: Molecular Authentication of Eurycoma longifolia Derivative Products in the Wood Science and Technology Industry

  • Arida SUSILOWATI;Henti Hendalastuti RACHMAT;Kusumadewi Sri YULITA;Asep HIDAYAT;Susila SUSILA;Nawwall ARROFAHA;Irsyad KAMAL;Fifi Gus DWIYANTI
    • Journal of the Korean Wood Science and Technology
    • /
    • v.52 no.4
    • /
    • pp.343-362
    • /
    • 2024
  • Eurycoma longifolia (pasak bumi) is a popular medicinal plant in Indonesia and is widely used in various products. Its high economic value has caused illegal harvesting and product falsification. Using molecular techniques, the authentication and traceability of E. longifolia derivatives can be controlled to ensure consumer safety. Therefore, this study aimed to authenticate the products and derivatives of E. longifolia (pasak bumi) produced, marketed, and consumed in Indonesia using molecular identification techniques. Genomic DNA from 37 leaf samples collected from the Sumatran mainland and the Riau Islands and six E. longifolia products were amplified and sequenced using trnL-trnF and internal transcribed spacer (ITS) regions. The results revealed that all leaf samples were indeed E. longifolia based on the markers used, with the six products, only the herbal tea product (sample code TCPB) was most likely derived from E. longifolia based on the two regions, suggesting that not all products labelled as E. longifolia in the market are authentic. The results also indicated that several other plants species are used as substitutes or adulterants, including Simaba spp., Simarouba spp., Homalolepis spp., Vernonia gigantea, Elephantopus scaber, Gymnanthemum amygdalinum, Cyanthillium spp., Potentilla lineata, Ailanthus altissima, Geijera paniculata, Hannoa chlorantha, and Dalbergia spp. Klebsiella pneumoniae bacteria were also identified in this study on the outer wooden cup of E. longifolia products. Therefore, this molecular approach is effective in identifying the authenticity of E. longifolia products, with trnL-trnF and ITS as the recommended DNA markers.