• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.187-197
• /
• 2018

To improve Organization's creative product by using external knowledge and information. This study suggests the procedure among Entrepreneurship, absorptive capacity(Potential absorptive capacity, Realized absorptive capacity), Creative product. To the empirical analysis of the theoretical relationship, The research model was set up through literature research. method Empirical analysis was conducted using total 487 questionnaires from worker of electronic industry in Kyung-buk region. the results of this study are as followings; First, Entrepreneurship related positively to Creative product. Second, Creative product was affected through process in order of Entrepreneurship, Potential absorptive capacity, Realized absorptive capacity. This results contribute to the improvement of organization's Creativity and the utilization of external knowledge.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.243-256
• /
• 2018

To use external knowledge for Creative product, This study suggests the model of Technological entrepreneurship, Absorptive capacity - Potential absorptive capacity(PACAP), Realized absorptive capacity (RACAP), Creative product and moderating effect of Motivation. This model was set up though literature research method. Empirical analysis was conducted by using 487 questionnaires from workers of electronic industry in Kyung-buk. Results of study are as followings; 1. Technological entrepreneurship related positively to Creative product. 2. Creative product was affected through process in order of Technological entrepreneurship, PACAP, RACAP. 3. Intrinsic motivation strengthens the relation between Technological entrepreneurship and PACAP. 4. Extrinsic motivation strengthens the relation between PACAP and RACAP. This results will contribute to the improvement of Creativity and the utilization of external knowledge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.285-293
• /
• 2021

This study evaluated the process of software quality assurance about the initial product in a weapon system. The software quality assurance of the initial product was insufficient before this study. Therefore, the process of the software quality assurance about the initial product in a weapon system is suggested. The process has three parts. First, the completeness of computer files, such as source code and execute files, were checked. Second, the suitability of the software technical data was checked. Finally, the connectivity of software technical data and the Korean defense specification were assessed. Overall, there is a need to toughen the software quality assurance in the research and development step and achieve early stabilization of mass production by preventing the problems that prevent the production of a product due to the insufficient software technical data.

• Journal of Information Technology Applications and Management
• /
• v.27 no.1
• /
• pp.173-186
• /
• 2020

This study examines the effect of congruity between product and TV reality show on purchase intention of Chinese consumers. A total of 110 respondents from Chinese consumers were collected using online surveys. The results were analyzed by SPSS 22.0. Multiple Linear Regression and process analysis were used to test the hypotheses. This article found that congruity between product and TV reality show, attitude toward product placement and recall of product affected consumers' purchase intention. In addition, the frequency of consumer watching TV reality show and familiarity of product moderated the attitude toward product placement and recall of product. This study provides useful implications for sponsors to select product placement as one of their marketing promotion tool.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.31-34
• /
• 2016

System In Package (SiP) is getting popular and momentum for the recent wearable, IoT and connectivity application apart from mobile phone. This is driven by market demands of cost competitive, lighter and smaller/thinner and higher performance. As one of many semiconducting assembly products, Leadframe product has been widely used for low cost solution, light/ small and thin form factor. But It has not been applied for SiP although Leadframe product has many advantages in cost, size and reliability performance. SiP is mostly based on laminate substrate and technically difficult on Leadframe substrate because of a limitation in SMT performance. In this paper, Leadframe based SiP product has been evaluated about key technical challenges in SMT performance and electrical shield technology. Mostly Leadframe is considered not available to apply EMI shield because of tie-bar around package edge. In order to overcome two major challenges, connection bars were deployed properly for SMT pad to pad and additional back-side etching was implemented after molding process to achieve electrical isolation from outer shield coating. This product was confirmed assembly workability as well as reliability.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.545-553
• /
• 2005

The purpose of this study is to analyse consumer injury and to find current status of industrial consumer injury in the field of consumer product. Also the subject under analysis is to develop a design guidance for the consumer product safety. we used consulting data of Korea Consumer Protection Board, Korea Product Liability Consulting Center and referred to statistic data of Korea National Statistical Office. Consumer injury data of Korea is insufficient comparing with leading industrialized nations. Therefore, we categorized hazard factors based on current injury data in Korea instead of analysing injury data statistically. And we analyse the hazard factors using the analytic hierarchy process in this study. Through the results, we defined the Consumer Injury Index(CII) to develop a design guidance for the consumer product safety.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.139-151
• /
• 2000

Developing a new commercial product, it is need to connect the end users demand of quality to the industrial technology of company. For this reason, this study is to build up the users demand for the imminent marketing product of a certain company by Analytic Hierarchy Process, analyze quantitatively users subjective thoughts collected by Group Consensus, calculate the added-value of users demands and verify the consistency of users opinions by consistency-exponential-calculation. The added value obtained by this method is substituted into a user-demand item of Quality Function Deployment. And, the technical characteristic data transferred from the extracted essential factor for developing and manufacturing a new product is substituted into a technical characteristic item of QFD. The faculty of quality is firstly finished by this procedure. But, because the relation a technical characterization with users demand do not be known in new product, Wassermans method was introduced for the correlation users demand with technology and for the processing and marketing of a new product. The all assumption on this thesis was based on the reliable real data of a certain company.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.123-130
• /
• 2001

At present, the virtual prototyping technology for complex product is one of the research and application hotspots in current simulation technology. In authors viewpoint, the virtual prototype development for complex product has become a systematic engineering, which can be called the complex product virtual prototyping engineering (CPVPE). In this paper, the architecture, key technologies and its supporting environment of CPVPE are primary discussed firstly. Combined with the research project and primary practice undertaken by the authors, a typical application demonstration of the aerospace complex product virtual prototyping engineering (including mechanism, dynamics, software and control system) is also introduced based on the virtual prototype supporting environment developed by the authors. Finally, some further research works on CPVPE are also presented in this paper.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.45-48
• /
• 1997

The kinematically admissible velocity field is developed for the eccentric extrusion of circular shaped products. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The results of the eccentric extrusion by upper bound analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of workpiece at dies entrance from that of the corss-section at the dies exit end. By the DEFORMTM-3D analysis, the curving of circular shaped product in extrusion is changed by the eccentricity, die land length and the die length. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.49-52
• /
• 1997

The kinematically admissible velocity field is developed for the analysis of the curving of an eccentric extrusion. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The result of the analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of the workpiece at the die entrance from that of the cross-section at the die exit. It also increase with the die land dimension. By the DEFORMTM-3D analysis, the curving of T-shaped product in extrusion is changed by the eccentricity, die land length and the friction constant. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.