• Journal of Technologic Dentistry
• /
• v.46 no.2
• /
• pp.42-48
• /
• 2024

Purpose: The purpose of this study is to investigate the applications and prospects of big data in digital dental healthcare. Methods: The study included 30 participants in the dental field (dentists, technicians, professors, and graduate students). From June 25 to 30, 2023, the contents of the study were thoroughly explained, consent was obtained from the research subjects, and a questionnaire was administered via an internet service. The questionnaires of 28 participants who responded completely were used for analysis. The collected data were statistically processed using IBM SPSS Statistics ver. 22.0 (IBM). Results: The use of big data in digital dental healthcare, digital dental health system, mobile dental health, dental health analysis, and telehealthcare were all heavily surveyed, with an average score of 3.97 or higher on a 5-point Likert scale. The areas where big data can be utilized in digital dental healthcare are as follows. The utilization rate for three-dimensional digital product development via linkage with big data systems and industrial field manufacturing technology was found to be 4.11±0.67, and the analysis of trends by age in the occurrence of various oral diseases was found to be 4.00±0.98. Conclusion: In the future, research into the viability of big data's success in the medical data field, which is directly related to human life, is needed. Additionally, social policies and regulations regarding big data-related information and standards in dental healthcare are necessary.

• Journal of the Korean Institute of Gas
• /
• v.11 no.1 s.34
• /
• pp.23-28
• /
• 2007

This paper presents an experimental investigation on the sealing defects and cracks of O-rings and a valve packing of a gas valve for a LPG cylinder. O-ring in which stops a gas leakage of a liquefied petroleum gas is very important for a LPG valve safety. Valve packing is to open and close a gas flow port for supplying and charging a LPG fuel. The sealing performance of two sealing units ism related to the leak safety and long lift of a gas valve. The investigated results show that most of O-rings was failed due to a circumferential crack in which is caused by partial press bonding failure near the partition zone and an excess compression rate. Some of the O-ring failure was originated by an extrusion of an excessive leak pressure of a LP gas. Thus, this paper strongly recommends a tight quality control and a safety guarantee system of O-rings and valve packing to guarantee a leak safety and to extend a service lift of a gas valve. At the end, a warranty policy of the sealing units should be adopted for increasing a product quality and safety of a gas valve.

• Journal of Distribution Science
• /
• v.5 no.2
• /
• pp.55-78
• /
• 2007

Northeast Asia is one of the regions which have been developing so rapidly. Yellow sea, located between Korea and China, became a very important logistical zone because of its huge volume of cargo and big passenger traffic. These two countries continuously are enlarging their port facilities such as berths, container yards, storage capacity and their information system in this the Pan Yellow sea area. Two countries also introduce many new liner routes and car-ferry shipping services. Therefore there must be a severe competitions and conflicts among the countries and their companies and ports as well. Some experts worry about the over capacity of port and logistics facilities. This paper investigated the current conditions of Korea-China shipping route, container and car-ferry route, and found out the problems and tasks, with the support of many experts. There are so many alternatives and strategies to solve and rationalize the shipping route and the problems of ports of two countries. This paper suggest many strategies connecting with marketing 4Ps. As port service is also a kind of service product, we can categorize the strategies into 4Ps suggested by McCarthy. And this paper classify all these alternatives into 3 dimensions. There are competitive strategies, cooperative strategies and coopetition strategies. This paper propose some directions and ideas for adopting the strategy in the port and logistical topics between Korea and China, suggesting 3 dimensions of strategies. After this paper, many diagnoses and practical investigations should be executed to introduce optimal solutions and minimize the additional cost.

• Journal of the HCI Society of Korea
• /
• v.13 no.2
• /
• pp.31-44
• /
• 2018

In the IoT environment, various things could be connected. Those connected things learn and operate themselves, by acquiring data. As human being, they have self-learning and self-operating systems. In the field of IoT study, therefore, the key issue is to design communication system connecting both of the two different types of subjects, human being(user) and the things. With the advent of the IoT environment, much research has been done in the field of UI design. It can be seen that research has been conducted to take complex factors into account through keywords such as multi-modality and interusability. However, the existing UI design method has limitations in structuring or testing interaction between things and users of IoT environment. Therefore, this paper suggests a new UI prototyping method. In this paper, the major analysis and studies are as follows: (1) defined what is the behavior process of the things (2) analyzed the existing IoT product (3) built a new framework driving personality types (4) extracted three representative personality models (5) applied the three models to the smart home service and tested UI prototyping. It is meaningful with that this study can confirm user experience (UX) about IoT service in a more comprehensive way. Moreover, the concept of the personality of things will be utilized as a tool for establishing the identity of artificial intelligence (AI) services in the future.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.83-90
• /
• 2016

Purpose - This study focuses on new type distribution channel that named as Omnichannel. Omnichannel is developed from Multichannel which is used in many distribution channels to buy or selling goods. Omnichannel basically needs an Information and Communications Technologies(ICT) to use, so researcher conduct a Technology Acceptance Model(TAM) to research model. Customer-brand relationship was used as dependent variable to focus on the role of Omnichannel. Research design, data, and methodology - The subject of this study is customer who purchase goods or service through omnichannel. Based on the literature from the preceding research analysis of TAM and customer-brand relationship, this study was constructed by the reference to previous studies, final research model design for figure out casual relationship among perceived ease of use, perceived usefulness, omnichannel use and customer-brand relationship. From 2016 February 3 to March 17, questionnaire survey targeted customers who use online and offline channels. 273 questionnaire survey had conducted, then, 252 survey data were available for empirical analysis. Researcher provide descriptive statistics for checking generality. Cronbach's alpha value was used to check the reliability of data. Exploratory factor analysis was used for purification of values and eigenvalue checking. After EFA, Confirmatory factor analysis was used to prepare structural equation modeling with executing structural equation modeling for confirming hypothesis which developed by researcher. Results - The main results of this empirical study are as follows. First, omnichannel's perceived ease of use has positive significant effect on perceived usefulness(estimate: 0.579). Moreover, omnichannel's perceived ease of use and perceived usefulness has positive significant effect on omnichannel use(estimate: 0.325,0.648). Second, using omnichannel has positive significant effect on brand-customer relationship(estimate: 0.521). Every hypothesis adopted as researcher designed. This study found out the intermediate relationship between perceived ease of use and omnichannel use by investigating hypothesis. Conclusions - Base on the empirical result, this study confirmed that TAM theory perceived has relation with omnichannel. First, factors of TAM has positive effect on omnichannel use, so it highlights the important role of customer based interface and usefulness. Especially, perceived usefulness has high indirect influence on ease of use and use of omnichannel. It seems that when customers try to decide use or not use omnichannel, customers focus on percept benefits from omnichannel. Thus, a provider should applicate attractive price table, accurate product or service information and high switching cost strategy to emphasize the usefulness of omnichannel. Second, using omnichannel enhances the relationship between customers and brand, because there are more time and frequency to serve customers. It is important because good relationship between customers can increase the future's financial performance through word of mouse, positive brand image and loyalty to brand or company. Finally, despite of empirical result and implications, this study has limitations. First, there are only a few previous studies about omnicahnnel, so literature reviews are restricted. While set up the factors which can affect the use of omnichannel, next study should be considered with broader theories or models(ex: contingency theory). Second, omnichannel has developed from multichannel, so comparative analysis is needed between these methods because there is a possibility about different forte character of each distribution system on customer's consuming patterns.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.25-53
• /
• 2013

This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.

• Science of Emotion and Sensibility
• /
• v.15 no.4
• /
• pp.503-516
• /
• 2012

According to the researches of robot and software agent until now, computational emotion model is dependent on system, so it is hard task that emotion models is separated from existing systems and then recycled into new systems. Therefore, I introduce the Engine of computational Emotion model (shall hereafter appear as EE) to integrate with any robots or agents. This is the engine, ie a software for independent form from inputs and outputs, so the EE is Emotion Generation to control only generation and processing of emotions without both phases of Inputs(Perception) and Outputs(Expression). The EE can be interfaced with any inputs and outputs, and produce emotions from not only emotion itself but also personality and emotions of person. In addition, the EE can be existed in any robot or agent by a kind of software library, or be used as a separate system to communicate. In EE, emotions is the Primary Emotions, ie Joy, Surprise, Disgust, Fear, Sadness, and Anger. It is vector that consist of string and coefficient about emotion, and EE receives this vectors from input interface and then sends its to output interface. In EE, each emotions are connected to lists of emotional experiences, and the lists consisted of string and coefficient of each emotional experiences are used to generate and process emotional states. The emotional experiences are consisted of emotion vocabulary understanding various emotional experiences of human. This study EE is available to use to make interaction products to response the appropriate reaction of human emotions. The significance of the study is on development of a system to induce that person feel that product has your sympathy. Therefore, the EE can help give an efficient service of emotional sympathy to products of HRI, HCI area.

• Journal of Environmental Health Sciences
• /
• v.46 no.2
• /
• pp.232-244
• /
• 2020

Objectives: The purpose of this study is to develop a management system for the safe handling of chemicals and related health management based on reporting under the Chemical Control Act (CCA). It is used to search handling information by constructing data linked to the name of companies, chemicals, products, etc. Methods: Due to the differences in submission periods for each reporting regulation of the Chemical Control Act, the data used is as follows: A statistical survey collected 26,222 companies in 2014 and 2016, Pollutant Release Transfer Registers (PRTR) collected 4,234 companies in 2015-2017, performance reports by handlers of hazardous chemical substances collected 14,658 companies in 2016-2018, and declarations for import of toxic chemicals collected 892 companies in 2016-2017. The total information on 36,080 companies is standardized based on company ID, name, business registration number, address, and more. The data were classified into information such as company, chemical, and product name and amounts handled and released, and then extracted according to criteria to establish relationships among classified information. Results: A search service was developed for handling information on chemical substances for reporting data by linking four reporting data: statistical survey, PRTR, performance report by handler of hazardous chemical substances, and declaration for import of toxic chemicals under the CCA. It was composed of five menus to search by regulation type, reporting regulation, companies and chemicals, and system management. Conclusion: It is necessary to use data linked by company, region, and chemical to respond and to prevent chemical accidents. In addition, these items can be utilized to perform handling and safety management of chemicals according to whether regulations under the CCA may be implemented.

• Journal of Science and Technology Studies
• /
• v.18 no.1
• /
• pp.177-217
• /
• 2018

This study examines the case of living lab applied in the R&D initiatives for solving societal problems and challenges. It discusses how to use the living lab in national R&D projects. The analyzed cases are 'Develop portable fundus camera for eye disease screening test to resolve health inequalities' and 'Auto-sensing integrated system development in rural pedestrian crosswalk'. As a result of the analysis, both cases were designed as a user participatory R&D structure by utilizing living lab. In other words, living lab has operated as a system that evolves technology-products-services into an infrastructure. It can realize final demand specification, product, service improvement and demonstration through continuous interaction of end users. As a result of the case analysis, the following policy tasks can be derived. First, living lab is a new concept and it is in the early stage of implementation in Korea. Therefore, it is necessary to monitor and evaluate living lab experiments and build suitable models for Korean society by sharing cases and achievements. Second, the strategic niche management are necessary for the introduction of living lab. Third, living lab can be used as a tool to transform the existing technology acquisition centered innovation policy to the policy for customer needs and problem solving. Fourth, there is a need for flexibility and adaptability in strategy and system to correct errors that appear in the living lab processes.

• Asia pacific journal of information systems
• /
• v.20 no.3
• /
• pp.139-166
• /
• 2010

The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.