• Journal of KIISE:Software and Applications
• /
• v.33 no.7
• /
• pp.605-614
• /
• 2006

The success of a software development project can be determined by the use of QCD. And as a software's size and complexity increase, the importance of early quality assurance rises. Therefore, more effort should be given to prevention, as opposed to correction. In order to provide a framework for the prevention of defects, defect detection activities such as peer review and testing, along with analysis of previous defects, is required. This entails a systematization and use of quality data from previous development efforts. FMEA, which is utilized for system safety assurance, can be applied as a means of software defect prevention. SW-FMEA (Software Failure Mode Effect Analysis) attempts to prevent defects by predicting likely defects. Presently, it has been applied to requirement analysis and design. SW-FMEA utilizes measured data from development activities, and can be used for defect prevention on both the development and management sides, for example, in planning, analysis, design, peer reviews, testing, risk management, and so forth. This research discusses about related methodology and proposes defect prevention model based on SW-FMEA. Proposed model is extended SW-FMEA that focuses on system analysis and design. The model not only supports verification and validation effectively, but is useful for reducing defect detection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.35-44
• /
• 2020

The purpose of this study is to elaborate the request for proposal (RFP) for the localization parts development support project of core parts carried out by the Defense Agency for Technology and Quality. The RFP is the most important document throughout the localization parts project, including project announcement and developer selection, design and test of the development product, final evaluation, and standardization of the project. However, if the RFP is not established at the beginning of the project, there is an increased risk of business failure due to frequent changes by various reasons. In this study, we recognized the necessity of elaboration of RFP and applied the AHP method for quantitative elaboration. Eight requirements of the RFP related to the mechanical/electrical performance of localized development products and three elaboration methods for each requirement were designed in a hierarchical structure, and each weight was calculated by applying the 5-point scale AHP method. The AHP survey was conducted with 20 developers participating in the localization parts project, and the consistency ratio of the AHP survey result was less than 0.1. The elaboration method with the highest value among the calculated weights is classified, and the analysis results and future research directions of the elaboration method are presented.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.1
• /
• pp.39-45
• /
• 1998

As a basic research for developing a sludge application technique in forestry, this study was conducted to investigage a reasonable amount and period of sludge to be applied onto forest nursery of Acer palmatum Thunb. The paper mill sludge was used for the study, and ammonium nitrate was treated to some of them to reduce the C/N ratio lower than 40. The maximum amount of applied sludge was 7ton/ha/year, and they were spread on spring and on late summer. The sludge application did not stimulate early growth of the trees during a year. Since there was no significant changes in soil chemical properties, the amount of applied sludge was thought to be too little to result in a significant role for tree growth. However, the soil water showed significant increase of Cu when the activated sludges were applied during late summer. Thus, the time of application need to be determined cautiously with considering the risk of ground water contamination. In conclusion, if we set a goal from the view point of long-term concept such as forest productivity rather than to get a short-term product, the uncomposted sludge in small amount during growing season might be considered to be applied on forest nursery.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.1-8
• /
• 2019

This study was conducted to investigate the possibility of spontaneous ignition in Butadiene popcorn polymer, which is used as raw material and product in a chemical plant. A component analysis, thermogravimetric analysis, thermal stability analysis, spontaneous ignition point measurement and accelerated velocity calorimetric analysis were performed. As a result of analysis, various kinds of flammable components were measured and thermogravimetric analysis showed a weight loss of 95.6% in air and 89.2% in nitrogen. As a result of the thermal stability analysis, heat generation started at $88^{\circ}C$ in the air atmosphere, and the heat generation rate increased sharply in the vicinity of the natural ignition point ($220^{\circ}C$). The heat generation started at about $70^{\circ}C$ in nitrogen atmosphere, and the two exothermic peak values were observed up to $450^{\circ}C$. As a result of accelerated rate calorimetry, there was no exothermic phenomenon, and the lowest ignition temperature was $211.7^{\circ}C$ as a result of analysis of natural ignition point. Based on the results obtained from the thermal stability evaluation, it is considered that the possibility of inducing the thermal deformation of the column by the heat of reaction is sufficient.

• International Area Studies Review
• /
• v.20 no.2
• /
• pp.85-111
• /
• 2016

Global semiconductor companies is investing enormous capital worldwide. And direct investment in China is increasing greatly these days, Especially, global semiconductor companies are setting up a factory in China due to expanding market rather than utilizing low labor cost. Therefore, this study is trying to analyze the background and process of direct investment from global Korean and Taiwanese semiconductor companies in China. Firstly, In 1996, Samsung semiconductor established a back end process factory in Suzhou. And in 2014, Samsung semiconductor set up a front and back end factory in Xian. Secondly, In 2006, SK Hynix built a front and back end factory in Wuxi. and SK Hynix set up a back end factory named Hitech semiconductor with Chinese company in 2009. Later in 2015, SK Hynix established a back end factory in Chongqing. Thirdly, In 2004, TSMC started to operate a factory in Shanghai, and in 2018, TSMC is going to establish a factory in Nanjing. Lastly, UMC bought a stock to produce product in Chinese local company named HJT, and at the end of 2016, UMC is going to finish building a factory in Xiamen. As a result, it was proved that most companies hoped to expand the chinese market by setting up a factory in china. In addition, Samsung expected to avoid a risk by setting up a factory in china, and SK Hynix wanted to avoid a countervailing duty by setting up a factory in china. Based on the result of this study, this study indicates some implications for other semiconductor companies which are very helpful for their future foreign direct investment.

• The Korean Society of Law and Medicine
• /
• v.22 no.4
• /
• pp.159-184
• /
• 2021

The significance of the enactment of the 「Act On The Safety Of And Support For Advanced Regenerative Medicine And Advanced Biological Products」 is to break away from the regulation of the Pharmaceutical Affairs Act and expand patient treatment opportunities through a medical technology approach to regenerative medicine, which is essentially a medical practice called 'transplantation'. However, more than a year after the law was enacted, clinical study has not been activated, with not a single high-risk study approved by the Ministry of Food and Drug Safety being approved. The reason is that despite the legal purpose of expanding patient treatment opportunities, the data requirements for clinical study approval are set in connection with drug development despite the insufficient legal basis, making it difficult for many researchers to meet the data requirements. Prior to the enactment of the Act, submitted data for clinical study on cell therapy products within the Pharmaceutical Affairs Act were cosiderably exempted from quality and non-clinical test data, but with the enforcement of the Advanced Regenerative Bio Act, quality and non-clinical test data are required in accordance with pharmaceuticals when applying for approval of a clinical study plan. To rectify this, when considering the identity of clinical study on advanced regenerative medicine to expand treatment opportunities, recognize that there are limitations in connection with drug development. And it is necessary to preserve the identity of clinical study on advanced regenerative medicine, and on the other hand, in the case of drug product approval, clinical study results should be utilized while specifying usage requirements. Therefore, with the power of the market and the voluntary motive of the clinical researcher, it is necessary to prepare the necessary data by themselves rather than the basic requirements for clinical study approval.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.3
• /
• pp.185-190
• /
• 2022

Background: Denosumab (Prolia®) is administered every 6 months for osteoporosis treatment. Co-administration of calcium and vitamin D is required to minimize hypocalcemia risk. We evaluated clinical outcomes based on the administration interval of denosumab and co-prescription with calcium-vitamin D combination products. Methods: A retrospective study was conducted using electronic medical records from 668 patients who started denosumab therapy between January 1 and December 31, 2018, at Seoul National University Bundang Hospital. Clinical outcomes, as measured by changes in T-score, were evaluated by the intervals and concurrent prescriptions with calcium-vitamin D combination products. Results: Of the 668 patients, 333 patients met the eligibility criteria. These patients were divided into two groups based on appropriateness of the administration interval: "Appropriate" (304 patients, 91.3%) and "Inappropriate" (29 patients, 8.3%). T-score changes were significantly higher in the "Appropriate" than in the "Inappropriate" group (0.30±0.44 vs. 0.13±0.37, p=0.048). At the beginning of the treatment, 221 patients (66.4%) were prescribed calcium-vitamin D combination products, but the changes in T-scores were not significantly different by the prescription status of the product (0.29±0.46 vs. 0.28±0.38, p=0.919). Conclusion: T-scores were significantly improved in patients with appropriate administration intervals. No significant changes in T-scores were observed by the prescription status with calcium-vitamin D combination products. For optimal treatment outcomes, prescribers should encourage adherence to the approved prescription information on dosage and administration, and pharmacists should provide medication counseling for patients.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.2
• /
• pp.309-327
• /
• 2022

As ICT convergence is progressing in all industrial fields and creating the global ecosystem of the supply chain is accelerating, supply chain risk related with cyber area are also increasing. In particular. the supply chain of ICT products is very complex in terms of technical and environmental factors to be managed, so it is vert difficult to transparently manage the entire life cycle. Accordingly, the US, UK, and EU, etc. are conducting and establishing cyber supply chainsecurity-related research and policies for ICT product supply chains. Korea also has the plan to establish management system to secure the supply chain of major ICT equipment as a task in the basic plan of the national cybersecurity strategy announced in 2019, but there is no concrete policy yet. So, In this paper, we review the cyber supply chain security management system in the United States and present a supplementary way to the National Information Security Manual in Korea from the perspective of cyber supply chain security. It is expected that this will serve as a reference material for cyber supply chain measures that can be introduced in domestic information security field.

• Journal of Life Science
• /
• v.33 no.8
• /
• pp.639-650
• /
• 2023

The levels of harmful components in aerosols from heated tobacco products (HTPs) have been reported to be significantly lower than in cigarette smoke. However, it remains unclear whether the use of HTPs can mitigate the cardiovascular risks associated with cigarette smoking (CS). The objective of this study was to investigate the effects of a short-term switch from CS to HTP use on cardiac autonomic regulation (CAR). Seven healthy male smokers completed an open-label, randomized, cross-over trial consisting of five days of CS, use of three different HTPs (IQOS use, IQ; lil SOLID use, LS; lil HYBRID use, LH), or non-smoking (NS). Each session was separated by a one-week washout period, and levels of exhaled carbon monoxide (CO) and carboxyhemoglobin (COHb), systolic (SBP) and diastolic blood pressure (DBP), and heart rate variability (HRV) reflecting CAR were assessed before use of the product assigned to each session and at 24, 48, 72, 96, and 120 hr after use. Levels of exhaled CO and COHb were statistically significantly reduced only during NS. There were no statistical changes in SBP and DBP within any session. However, in HRV spectral analysis, log-transformed high frequency (lnHF) increased statistically significantly in IQ, LS, and NS, respectively. Normalized HF (HFnu) was significantly increased in NS and LH, respectively. lnHF and HFnu showed significant interaction effects. The findings of this study suggest that a short-term switch to HTPs instead of CS may lead to different distribution patterns of CAR, primarily driven by enhanced cardiac vagal tone.