• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.829-835
• /
• 2016

Electro-Mechanical Actuator installed on the aircraft plays a key role in an aircraft's flight control through flight control computer. Reliable prediction of the actuator is important for the aircraft. To estimate the lifetime of a product, it is necessary to test full target life. However, it is very difficult to perform it due to the long life time of actuator but short period of development time with increasing cost. Therefore, accelerated life test has been used to reduce the test time for various reasons such as reducing product's development cycle and cost. In this paper, to predict the lifetime of the actuator, we analyzed the flight profile of aircraft and adapted the method of accelerated life test in order to accelerate failure modes that might occur under user conditions. We also set up an endurance test equipment for validating the demanded lifetime of an actuator and performed accelerated life test.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1109-1133
• /
• 2013

In an effort to discover new technologies and to forecast social changes of technologies, a number of technology life-cycle models have been developed and employed. The hype cycle, a graphical tool developed by a consulting firm, Gartner, is one of the most widely used models for the purpose and it is recognised as a practical one. However, more research is needed on theoretical frames, relations and empirical practices of the model. In this study, hype cycle comparisons in Korean and global search websites were performed by means of web-search traffic which is proposed as an empirical measurement of public expectation, analysed in a specific product or country in previous researches. First, search traffic and market share for new cars were compared in Korea and the U.S. with a view to identifying differences between the hype cycles in the two countries about the same product. The results show the similarity between the two countries with the statistical significance. Next, comparative analysis between search traffic and supply rate for several products in Korea was conducted to check out their patterns. According to the analysis, all the products seem to be at the "Peak of inflated expectations" in the hype cycles and they are similar to one another in the hype cycle. This study is of significance in aspects of expanding the scope of hype cycle analysis with web-search traffic because it introduced domestic web-search traffic analysis from Naver to analyse consumers' expectations in Korea by comparison with that from Google in other countries. In addition, this research can help to explain social phenomina more persuasively with search traffic and to give scientific objectivity to the hype cycle model. Furthermore, it can contribute to developing strategies of companies, such as marketing strategy.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.13-18
• /
• 2018

Plant Engineering is a series of activities going through following life cycle phases: planning, basic design, detailed design, procurement and construction, commissioning, operation and maintenance, to produce a target product. From among these phases of plant engineering life cycle, a detailed design phase is an important phase producing final design deliveries. Luckily, through technical co-operation and experiences of constructing plants, large Korean engineering companies have accumulated know-hows of efficient detailed designs. However, smaller engineering companies have less experience of performing detailed designs so there is always a risk of causing design errors in the detailed design phase. To mitigate the risk of design errors in the detailed design phase, it is necessary to systematize a concrete activity model of a detailed design phase. In this paper, we have developed a prototype of a detailed design activity model through a widely used function modeling methodology called IDEF0.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.373-376
• /
• 2001

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the ability to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed system embodies a virtual manufacturing line on the simulation using various manipulators and work cells as manufacturing components. we develop a virtual simulator system on Window 98/NT environment of Microsoft, operating system using of the greater part of PC user. Window program have a merit making GUI environment that programmer can use without the expert knowledge about hardware. A suer with the simulator can utilize an interface that makes one to manage the separate task process for each manufacturing module, change operator components and work cells, and easily teach tasks of each task module.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.278-285
• /
• 2012

Purpose: Weapon systems have the long life cycle unlike the consumer product. Thus, the reliability of weapon system is improved during the life cycle through the steady technical change. In this paper, we deal with the method of evaluating the reliability of weapon system with the field failure data. Methods: Especially, we present how to gather the field failure data and evaluate the reliability through the case of K-series weapon system. To evaluate reliability, the reliability growth model is used and the result is discussed. Results: It is steadily improved the reliability of K-series weapon system deployed from 2000 to 2004. The frequency of the failures that affect the mission is largely reduced and MTBMF(mean time between mission failure) is also improved. Conclusion: We can guess the trend of the reliability of weapon system with the field data through this study. Furthermore, it can be used to improve the reliability and make maintenance policy.

• Journal of National Security and Military Science
• /
• s.2
• /
• pp.261-283
• /
• 2004

To build up the military strength based on information oriented armed forces, the Korean ministry of national defense (MND) promotes the defense CALS (Continuous Acquisition and Life cycle Support) initiative for the reductions of acquisition times, improvements of system qualities, and reductions of costs. These defense CALS activities are the major component of the underlying mid and long term defense digitization program and the ultimate goal of program is to bring a quick victory by providing real-time battlefield intelligence and the economical operations of the military. The concept of defense CALS is to automate the acquisition and disposition of defense systems throughout their life cycle. For implementing defense CALS, the technology for exchange and sharing CALS standard data that is created once and used many times should be considered. In order to develop an efficient CALS information exchange and sharing system, it is required to integrate distributed and heterogeneous data sources and provide systematic search tools for those data. In this study, we developed a content based search engine technology which is essential for the construction of integrated data environments. The developed technology provides the environment of sharing the CALS standard data such as SGML(Standard Generalized Markup Language) and STEP(Standard for The Exchange of Product model data). Utilizing this technology, users can find and access distributed and heterogeneous data sources without knowing its actual location.

• Journal of Information Technology Applications and Management
• /
• v.20 no.2
• /
• pp.69-87
• /
• 2013

The expanded spiral model in this paper consists of five processes of architecture design, architectural construction, architectural maintenance, operation, and architectural management. The former four processes are executed alternatively, while the latter architectural management process is executed continuously interacting with the other processes during the whole life cycle of the system. The expanded spiral model provides a conceptual framework to sort discussions of architectural degeneration into those of product-oriented processes and those of management processes, making it possible to incorporate the models and body of knowledge about project and program management especially those of Project Management Institute, into discussions of architectural degeneration. A good architecture decomposes the software-intensive system into components mutually interacting in a well-formed structure. The architecture design process and the architectural construction process together create the object system with well-designed architecture. The architectural maintenance process prevents the implemented architecture deviate from the designed architecture. The architectural management process monitors the changes of requirements including architecturally significant requirements, supports the other processes to be executed reflecting various perspectives of stake-holders, and creates and documents the reasons of architectural decisions, which is considered as a key element of the architecture.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.612-620
• /
• 1999

Environmental impact assessment in the step of the Life Cycle Assessment (LCA) measures relative values of importance or weight of the environmental load characterized in the inventory analysis. The weight measurements are used to evaluate the environmental load or the effect of the industrial product or technology. In this paper the Analytic Network Prpcess (ANP) is introduced to calculate a relative weighting of the environmental impact. The ANP is considered as one of the useful decision making framework and allow for more complex interrelationships, feedback, and inner/outer dependence among the decision level and factors. The weighting from the ANP may applied to obtain the overall evaluation value of environmental load.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.69-75
• /
• 2019

The safety and performance of medical device software is managed through life-cycle processes, which represent the entire process of research and development (R&D). The life-cycle process of medical device software is represented by an international standard called IEC 62304, ISO/IEC 12207. In order to license the product, the manufacturer must have document artifacts that comply with the IEC 62304 standard. However, these standards only describe the content of the activity and do not provide a method or procedure for documentation. Therefore, this paper suggests R&D documentation guidelines that assist medical device software developers to have R&D documents conforming to the standards. For this purpose, this study identifies the requirements related to documentation among the requirements existing in the standard and extracts them in the form of guidelines showing only the core information of the requirements. In addition, through the Web framework implemented based on this research, the developer can evaluate whether the technical documents are written in accordance with the R&D document guidelines. Medical device software manufacturers can efficiently produce high-quality research and development documents through R&D documentation guidelines, and they can have standards-compliantresearch and development documentation required for licensing procedures.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.151-162
• /
• 2019

Purpose: This study is in order to secure high quality of military supplies, it is important to secure design quality in the development phase. I will review how to establish a quality assurance system in the development phase based on the author's seminar presentation contents and application example of Hanwha Systems Co., Ltd. Methods: To guarantee design quality in the development phase, in 2002, quality assurance system that is adequate for SQA(Software Quality Assurance)'s requirements of CMM(Capability Maturity Model) was conduct. In 2009, based on the CMMI(Capability Maturity Model Integration) Level 5, there has been continuous and reenforced quality assurance activities. Results: By suggesting the construction and a case study on application of R&D quality assurance, it would be helpful for companies aiming to construct or enhance quality assurance system. Conclusion: To secure high quality for military supplies, a development QA system should be established to secure quality in the development phase. In addition, Total life cycle QA system for development, mass production and operation phase should be reestablished.