• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.41-48
• /
• 1995

In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.164-176
• /
• 2012

In the present study, rapeseed flour (RSF), which is a by-product from the production of edible oil and biodiesel extracted from rapeseed, was used to develop alternative adhesives for the production of plywood panels. To examine the effects of the enzyme on the adhesive properties and formaldehyde emission of the RSF-based adhesive resins, three enzymes, such as cellulase (CEL), pectinase (PEC) and protease (ALC), were used either separately or together. As a crosslinking agent, PF prepolymers, which were prepared with 1.5, 1.8 and 2.1 mole formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), were added into the RSF hydrolyzates. The adhesive resins formulated with CEL- or CEL-PEC-RSF hydrolyzates and 1.8-F/P PF prepolymers exhibited excellent adhesive strengths and formaldehyde emission. The tensile shear strength and formaldehyde emission of the plywood panels bonded with the formulate resins were satisfied with the minimum requirement of the KS standard for ordinary plywood panels (0.6 N/$mm^2$). In addition, formaldehyde emissions of the plywood panels approached to that of E0 specified in the KS standard (0.5 mg/${\ell}$), and even had much better than those of commercial UF glue mixes. Overall, the use of RSF-based adhesive resins for the production of plywood panels might provide durable adhesive properties and an environmentally friendly substitute for petroleum-based adhesive resins. However, further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.

• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.149-160
• /
• 2018

A large number of functional living products are being produced for eco-friendly or health-promoting purposes. In the manufacturing process, such products could be adulterated with raw materials with high radioactivity, such as monazite and tourmaline. Thus, it is essential to manage raw materials and products closely related to the public living. For proper management, an accurate radioactivity data of the processed products are needed. Therefore, it is essential to develop a rapid and validated analytical method. In this study, the concentration of the radioactive $^{238}U$ and $^{232}Th$ in building materials (e.g., tile, cement, paint, wall paper, and gypsum board) and living products (e.g., health products, textiles, and minerals) were determined and compared by ED-XRF and ICP-MS. By comparing the results of both methods, we confirmed the applicability of the rapid screening and precise analysis of ED-XRF and ICP-MS. In addition, $^{238}U$ and $^{232}Th$ levels were relatively lower in building materials than in living products. Particularly, $^{232}Th$ content in 6 of 47 living products exceeded (maximum $8.2Bq{\cdot}g^{-1}$) the standard limit of $^{232}Th$ content in raw material ($1.0Bq{\cdot}g^{-1}$).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1388-1398
• /
• 2015

Quality Function Deployment (QFD) is the most complete and comprehensive method for translating what customers need from a product. This study utilized QFD to develop sauces made from Gochujang and to determine how to fulfill international customers' requirements. A customer survey and expert opinion survey were conducted from May 13 to August 22, 2014 and targeted 220 consumers and 20 experts in the U.S. and China. Finally, a total of 208 (190 consumers and 18 experts) useable data were selected. The top three customer requirements for Gochujang sauces were identified as fresh flavor (4.40), making better flavor (3.99), and cooking availability (3.90). Thirty-three engineering characteristics were developed. The results from the calculation of relative importance of engineering characteristics identified that 'cooking availability', 'free sample and food testing', 'unique concept', and 'development of brand' were the highest. The relative importance of engineering characteristics, correlation, and technical difficulties are ranked, and this result could contribute to the development Korean sauces based on customer needs and engineering characteristics.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.217-237
• /
• 1998

The present research is to study the make-up culture of Korea and its neighboring countries such as China and Japan during the period from the prehistoric age to the 19th cen-tury. The research was made by documents analysis. The results are summerised as follows : (1) A man has a basic instinct to beautify himself. There was not a significant difference between the make-up behavior of men and women in its primal stage. It was by the start of farming and the division of labor that made the make-up behavior as a feminine culture. The difference of sexual role caused the con-ceptual difference between manly beauty and womanly beauty. It was very natural for women to regard the make-up as the best way for showing their feminine beauty. In Korea, China and Japan, there were vari-ous kinds of primal actions such as tattooing, body-painting, and tooth make-up which were used in the purpose of body protection, incantation, ornament, and so on. Ass their ornamental purpose was becoming more important, these primal actions became the basis of the feminine make-up culture. Nowadays make-up, having mental and emo-tional function, is helpful to increasing self-satisfaction, promoting good personal relation-ship, and attracting attention from the other sex. It also has other functions of showing social status, wealth, age, sex, courage, power, and so on. (2) The representative make-up product used widely in the three countries was Boon (powder) which decides the overall color of face. The key point in the production of Boon was to increase its power of adsorption. The invention of Yunboon (power mixed with lead) solved this major problem of Boon. Yeonji which decides the color of cheek was the mixture of Boon and the powder of Honghwa (a kind of red-colored flower or tree). Mimook (eyebrow pencil) was developed to match up with the various and changing currencies of penciling eyebrows in each nation and times, Yeonji and Joosa (red sand) were used as Jinji (lip stick). The predominant color of Jinji was red. As miscellaneous methods of partial make-up, there were Kon-ji used in a wedding cer-emony in korea, Aek-hwang, Hwa-jeon, Sa-hong, and Myun-yup in China, and Chi-heuk, a peculial method of partial make-up in japan. (3) There were various factors which decided the characteristics of make-up culture usually reflects international atmosphere, the form of government, economic situation, re-ligious and social ideology, aesthetic sense, symbolizing meanings of colors, and so on. The up and down of an influentian country was one of the major factors which decided the characteristics of the make-up culture of its neighboring countries. When a country took a liberal form of government, it had diverse and splendid tendencies in its make-up culture. The better a nation's economic situation is, the more abandant and various its make-up culture is, and sometimes, the more eccentric and decadents it was. In the field of make-up production, the three countries had their own characteristics. But, as a whole, China was the leading nation who spread the culture and products of make-up to Korea and Japan. Though the Chinese make-up culture and products were usually spread to Japan through Korean, there was some evidence of direct exchanges between China and Japan through its dispatches of Kyun-Tang-Sa(Japanese delegation to the Tang Dynasty). While religion had a positive influence on the development of make-up culture by introducing new methods of make-up, Confucianism exercised strict control over the make-up cul-ture. The currencies in arts and changes of esthetic sense introduced new methods and booms to the make-up culture. Literature made people pay increasing attentions to the countenances of women and changed the standards of esthetic sense. We can find out that the social status of woman was also reflected in the make-up culture. As the social status of women became higher, the feminine make-up culture also developed more then ever. As mentioned above, the make-up cultures of the three countries reflected their social values, esthetic senses, and emotional feelings. Through their cultural exchanges, the three countries could develop various make-up products and methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.4
• /
• pp.593-601
• /
• 2016

This study was carried out to establish an effective marketing strategy based on Importance-Performance Analysis (IPA) of rice-convenience foods. IPA is one of the most efficient and simple methods to evaluate product quality. Data were collected from 652 people (320 males and 332 females) and analyzed by SPSS 19.0. Subjects consumed rice-convenience foods as a snack substitute (19.3%), breakfast (20.7%), lunch (37.4%), dinner (15.2%), and late-night meal (7.4%). The purpose for consumption of rice-convenience foods were as follows: light meal (34.8%), lack of time to prepare meal (42.2%), favorite restaurant is not nearby (2.3%), save money (3.4%), and outdoor activities (9.7%). All attributes about rice-convenience foods were categorized into intrinsic property and extrinsic property. As a result of factor analysis, health, sensibility, and diversity factors were extracted from intrinsic property. In addition, dependence and appearance factors were drawn from extrinsic property. In analyzing the differences between importance and performance, there were significant differences; 16 items in the intrinsic property (P<0.01), and 10 items in the extrinsic property (P<0.001). The IPA matrix is composed of four quadrants, and each represents different strategies; the first, 'keep up the good work', the second, 'possible overkill', the third, 'low priority for management', and the fourth, 'concentrate management'. As a result, factors of rice-convenience foods positioned in the fourth quadrant were 'safety (from food additives, etc.)' and 'price' in the intrinsic property and 'nutrition label' and 'safety of packaging material' in the extrinsic property. They need to be improved immediately. In this study, rice-convenience food factors for continuous maintenance and concentrative improvement were compared by IPA. Based upon the results of this study, it is necessary to develop methods to make efficient use of limited resources and practical marketing strategies.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.655-661
• /
• 2016

To develop scab-resistant pear (Pyrus spp.) varieties with fruits that are as crisp and juicy as Asian pears, a cross was made between 'Whangkeumbae' and 'Bartlett' varieties (P. pyrifolia ${\times}$ P. communis) at the Pear Research Institute of the National Institute of Horticultural & Herbal Science, Rural Development Administration, in 1994. Among the 285 seedlings, 'Greensis' was first selected in 2006 for its good eating quality and named in 2012 after regional adaptation tests in nine regions and ten experimental plots from 2007 to 2012. The tree showed a vigorous growth habit and semi-spreading characteristics, like 'Whangkeumbae'. The optimum fruit harvest date was also around Sept. 26 and fruit was round in shape and green in skin color at maturity. Average fruit weight was 470g, and the soluble solids content was $12.4^{\circ}Brix$. The flesh was very crisp and juicy, and had good eating quality. Its' leaf size was similar with 'Bartlett' and smaller than 'Whangkeumbae'. The average of full bloom date of 'Greensis' was determined as Apr. 26, which was six days later than 'Whangkeumbae' and similar with 'Bartlett'. S genotypes of 'Greensis' were identified as $S_4S_e$ by S-allele PCR product sequencing analysis. It seems that the $S_4$ allele was inherited from 'Whangkeumbae' and the Se allele from 'Bartlett'. 'Greensis' displayed strong resistance to scab disease caused by Venturia nashicola, similar to European pear cultivars like 'Beurre Hardy' and, 'Conference'. 'Greensis' was also highly resistant to black leaf spot (Alternaria kikuchiana) in the field

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1259-1268
• /
• 2016

In this study, we investigated antimicrobial peptide from the acidified muscle extract of Mytilus coruscus, which mostly inhabits China, Japan, and Korea, to develop a natural product-derived antibiotics substitution in terms of its abuse and restriction. Antimicrobial peptide was purified by $C_{18}$ reversed-phase high-performance liquid chromatography and was detected as having a molecular mass of 6,701 Da by MALDI-TOF/MS. The N-terminal amino acid sequence of the purified peak was obtained from edman degradation, and 20 identified residues shown 100% identity with the N-terminus region of sperm-specific protein and protamine-like PL-II/PL-IV precursor of Mytilus californianus. We also identified 60 open-reading frame (ORF) encoding amino acids with 183 bp of purified peptide based on the obtained amino acid residues. The amino acid sequence of ORF showed 100% and the nucleotide sequence revealed 97.2% identity with the protamine-like PL-II/PL-IV precursor of Mytilus californianus. Synthesized antimicrobial peptide showed antimicrobial activity against gram-positive bacteria, including Bacillus cereus (minimal effective concentration [MEC], $20.8{\mu}g/ml$), Bacillus subtilis (MEC, $0.2{\mu}g/ml$), Streptococcus mutans (MEC, $0.2{\mu}g/ml$), gram-negative bacteria including Pseudomonas aeruginosa (MEC, $5.7{\mu}g/ml$), Escherichia coli (MEC, $2.6{\mu}g/ml$) and fungi, Candida albicans (MEC, $56.3{\mu}g/ml$). In addition, synthesized peptide showed stable activities under heat and salt conditions against gram-positive and gram-negative bacteria, but was inhibited by salt against only C. albicans. With these results, isolated peptide from M. coruscus could be an alternative agent to antibiotics for defending against pathogenic microorganisms, and helpful information to understand the innate immune system of marine invertebrates.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1474-1481
• /
• 2011

This study investigated the physicochemical characteristics of Korean wheat flour substituted for 0%, 15%, 30%, 45%, and 60% durum rimachinata wheat in order to develop a Korean wheat pasta suitable for consumer-preferred soft textures. The particles of Korean wheat that were less than 250 ${\mu}M$ were 87.03% of all particles, while 68.7% of durum rimachinata had particles more than 250 ${\mu}M$ in size. Durum rimachinata had more protein (13.84${\pm}$0.03) and ash (0.70${\pm}$0.02) than Korean wheat. In farinograph characteristics, water absorption, development time, stability, and weakness increased as the amounts of substituted Korean wheat flour increased. Also, the gelatinization characteristics of the amylograph exhibited an increase of gelatinization temperature and decrease in maximum viscosity. However, maximum viscosity was shown to be more than 550 B.U. until 30% of the substitution level of Korean wheat flour to durum rimachinata wheat. Also, it did not affect the texture of the noodle product. We could make pasta with softness and springiness with less than a 15% substitution level of Korean wheat flour due to similar characteristics in cooking properties such as weight, volume, water absorption, turbidity, and cooking loss when compared to the control. L and a values increased, and the b value decreased in color as substitution amounts of Korean wheat flour increased. The hardness and adhesiveness of cooking noodles was shown to be a low value at more than a 30% substitution level of Korean wheat flour, and springiness, gumminess, and chewiness all exhibited high values. In a sensory evaluation, overall acceptability was shown to have the highest score in control. More than 30% of substitution of Korean wheat flour showed high preferences. Therefore, 15% of the substitution level of Korean wheat flour could be adapted in dough and cooking properties for making pasta-substituted Korean wheat. However, a texture analyzer and sensory evaluation of cooked pasta was shown to have a good quality at more than 30% substitution level of Korean wheat flour.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.1
• /
• pp.23-31
• /
• 2011

Domestic dairy industry is now standing at the crossroad for planning next fifty years, mainly because economic and environmental situations surrounding Korean peninsula are fast changing. For the aspects of dairy consumption, fresh milk consumed less, while consumption of the other milk and dairy products is slightly increasing every year. In 2010, it is approximately estimated that 1,939,000 tons of raw milk was used and the supply would be short by about 35,000 tons, based on the amounts in the previous year. Currently, multilateral negotiations against US and EU are underway. When it will be in effect in the future, significant damage would be expected in the dairy and livestock sectors, leading to cut domestic milk supply. Quality of farm-gate milk is graded as 1A on average 90% or more, loaded with very low in microbial and somatic cell counts. Therefore, policy implications have to be placed toward switch currently the UHT processing method to Pasteurization or the LTLT technology, by which natural flavors and nutrients in milk mostly remain after heat treatment. Domestic cheese products comprise only 10% and the rest is occupied by the various kinds of imported natural products. The market size keeps increasing up to 65,423,000 tons last year. When it comes to vitalization of our natural cheese industry, cheese whey, which is a main by-product in cheese manufacture, is a critical issue to be solved and also "On-Farm Processing" would be combined with a growth of big dairy companies when few immediate issues among the relevant regulations will be eased and alleviated in the near future. Fermented milk market is recorded as a single area of gradual increase in the past 10 years, Korea. Fermented yogurts with health claims targeted stomach, liver, and intestine are popular and has grown fast in sales amounts. In this context, researches on beneficial probiotic lactic acid bacteria are one of the important projects for domestic milk and dairy industries. Labelling regulations on efficacy or health-promoting effects of functional dairy products, which is the most important issue facing domestic dairy processors, should be urgently examined toward commercial expression of the functionality by lawful means. Colostrum, a nutrition-rich yellowish fluid, is roaded with immune, growth and tissue repair factors. Bovine colostrum, a raw material for immune milk preparations and infant formula, can be used to treat or prevent infections of the gastrointestinal tract. Nanotechnology can be applied to develop new milk and dairy products such as micro-encapsulated lactase milk for consumers suffering lactose intolerance. Raw milk is suggested to be managed by its usage in the processing line because imbalance of supply and demand is structural problem in every country and thus the usage systems as in the advanced dairy countries is worth of bench-marking to stabilize milk supply and demand. Raw milk produced is desirable to divide into the three parts; domestic, import, and buffering purposes. It is strongly recommended that a domestic dairy control center as an institutional framework should be urgently established as is Dairy Board in New Zealand and Australia. Lastly, government policy should be directed to foster the highly-educated people who are majoring in Dairy Sciences or working in the dairy industry by means of financial support in studying and training abroad as well.