• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.123-130
• /
• 2024

As technology advances swiftly and the lifespan of products becomes increasingly short, there is a demand to fasten the pace of research outcomes, product development, and market introduction. As a result, the researchers and developers need a computational experiment environment that enables rapid verification of the experiment and application of research findings. Such an environment must efficiently harness all available computational resources, manage simulations across diverse test scenarios, and support the experimental data collection. This research introduces the design and implementation of an experimental frame based on a microservice architecture. The experimental frame leverages scripts to utilize computing resources optimally, making it more straightforward for users to conduct simulations. It features an experimental frame capable of automatically deploying scenarios to the computing components. This setup allows for the automatic configuration of both the computing environment and experiments based on user-provided scenarios and experimental software, facilitating effortless execution of simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1161-1166
• /
• 2017

Recently, with the development of display technology, AMOLED(Active Matrix OLED) panel production and demand are increasing. Unlike LCD, AMOLED panel basically does not need backlight, so it can output clear images with low power consumption. Therefore, the AMOLED market is growing globally. Accordingly, the demand for inspection devices required for production is also expanding. The inspection device of the AMOLED panel aging system operates in conjunction with MES(Manufacturing Execution System) and MIS(Management Information System), and it is efficient to construct network environment. The inspection device used for panel aging is a pattern generator capable of outputting multiple signals. Efficient design is required to operate multiple signal generators. To solve this problem, the proposed system proposed a method for remotely controlling the signal generator remotely and a method for driving the AMOLED panel. And the timing and power setting results are presented.

• Journal of Digital Contents Society
• /
• v.7 no.4
• /
• pp.287-294
• /
• 2006

Mass-customization is fast growing a segment of the apparel market. 2D Virtual wearing system is one of visual support tools that make possible to sell apparel before producing and reduce the time and costs related to product development and manufacturing in the world of apparel mass-customization. This paper is related to fabric color mapping method for 2D image-based virtual wearing system. In proposed method, clothing shape section of interest is segmented from a clothes model image using a region growing method, and then mapping a new fabric color selected by user into it based on its intensity difference map is processed. With the proposed method in 2D virtual wearing system, regardless of color or intensity of model clothes, it is possible to virtually change the fabric color with holding the illumination and shading properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple fabric color combinations for individual styles or entire outfits.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.925-930
• /
• 2002

This paper discusses techniques for embedding data into 3D polygonal models of geometry. Much researches of Watermarking had been gone as element technology of DRM (digital rights management). But, few research had gone to 3D polygonal model. Most research is limited at text document, 2D image, animation, music etc. RP system is suitable a few production in various goods species, and it is used much in industry to possible reason that produce prototype and find error or incongruent factor at early stage on design in product development childhood. This paper is research about method that insert watermark in STL ( stereolithography) file that have 3D shape model. Proposed algorithm inserts watermark in normal vector region and facet's interior region of 3D shape data. For this reason, 3D shape does not produce some flexure and fulfill invisibility of watermark. Experiment results that insert and extract watermark in normal netter region and facet's Interior region of 3D shape data by proposed algorithm do not influence entirely in 3D shape and show that insertion and extraction of watermark are possible.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.235-241
• /
• 2011

A large number of industry and trade circulation enterprises integrate logistics resource. They give links of product transport to some professional logistics enterprises in order to reduce costs. We call these professional logistics enterprises as the Third-party Logistics. As the development of the computer and internet, the suppliers, buyers and the Third-party Enterprises connect each other with internet. And different company use different management software, so heterogeneous data become a big problem of the information system for Third-party Enterprises. We built the logistics ontology with prot$\'{e}$g$\'{e}$, and translate it in OWL. We also built the rules for Logistics Ontology to improve the limitations of the OWL. Then we design the intelligent system for 3PL Enterprises Distribution Center based on Logistics Ontology and Logistics Rules. At final, we give an example to show the workflow visually.

• Journal of Digital Convergence
• /
• v.11 no.1
• /
• pp.267-273
• /
• 2013

Recently, coupons are distributed in various ways such as paper, Internet, and mobile phone, with the development of the information and communications technology. Coupon users benefit from the use of these coupons. For example, they can get a discount for the product that they wanted to buy and can be offered additional services. However, paper and Internet coupons have a risk of loss since users have to cut them out and keep them separately. Mobile coupons also don't provide users with user convenience, because coupon users first look for coupon data from their mobile phone and show it to the counterperson. To solve these problems, this study proposes a NFC-based mobile coupon system under which we can use coupon data only with mobile device access.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.478-487
• /
• 2003

In this paper, a type and special feature of Multi-level inverter used in medium-voltage and high-capacity motor driver is introduced. Especially, a power quality and structural advantages of H-Bridge Multi-level inverter is described. It presented the specific structure of power circuit, design method, controller composition and PWM techniques of the cascaded H-Bridge Multi-level inverter which is developed. The feasibility of the developed product based on 3,300V lMVA 7-level H-bridge inverter was studied by experiments and we get conclusion that 1)generate of near-sinusoidal output voltage; 2)is low dv/dt at output voltage; 3)reduce the harmonic injection at input; Experiment demonstrate that it is very economical in productivity because of using the existing production technique and examination equipment, and has the reliability and a good maintenance due to the structure of Power Cell unit combination as well as low cost IGBT.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.147-163
• /
• 2008

This research aims to develop cultural products for professional sales after producing creative products utilizing dinosaur characters, which are the representative exhibited item of dinosaur-centered museum. There are seven museums in Korea whose theme is dinosaur. There are three dinosaur museums among them, Goseong Dinosaur Museum at Kyungnam, Mokpo Natural History Museum, and Seodaemun Museum of Natural History. While inspecting cultural products within the museum shops of these three museums, general products occupy more than 80% of all the products rather than products related to dinosaurs, and has a problem that most products are decorative ones. This resulted from that enterprises supplying these products are not professional ones and are irrelevent to cultural industry; as result, purpose of conveying culture through products is lost. This research develops dinosaur characters utilizing computer 3D techniques in order to imbue unique characteristics to dinosaur museums and informing cultural speciality of our country. In addition, this research presented design method of cultural products by grafting traditional symbols onto these characters, and actually produced 11 items of 5 kinds: toys(dolls), clothes(T-shirts, pajamas, socks), stationery(notebooks, memo), accessaries (bags, umbrellas, handkerchief), and others(cups). On the items above, dinosaur characters are variously utilized in form of printing, embroidery, and stickers by using computer 3D technique. A cultural product is a tangible form which could show variety of cultural characteristics of our nation that could spread the culture through the consumers, and such type of purchasing could increase values of cultural industry by creating economic profits; such points are the significance of this study.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.3
• /
• pp.85-94
• /
• 2008

The process of construction industry basically consists of many complicated phase, such as planning, design, construction, MO&R(Maintenance, Operation, and Repair), and deconstruction. And various participants communicate each other during every phase of process. Since construction components have become more complex and diverse recently, many researches on how to exchange and standardization of building. However, in Korea research on IFC(Industry Foundation Classes) which is a standard for international data exchange have been conducted with only study limited Issues, such as studies on the development of 2D extension model for IFC, researches on 3D or 4D based IFC extension, and etc. This stuff covers tests of the compatibility among commercial 3D CAD programs using IFC file format. Several problems of the current IFC model are retrieved as a result.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.395-408
• /
• 2023

This study presents a novel method for addressing the issue of high-concentration contaminants (ammonium, phosphate, antibiotics) in leachate arising from decomposing livestock carcasses. Antibiotics, developed to eliminate microorganisms, often have low biodegradability and can persist in the ecosystem. This research proposes design elements to prevent contamination spread from carcass burial sites. The adsorbents used were low-grade charcoal (an industrial by-product), Alum-based Adsorbent (ABA), and Zeolite, a natural substance. These effectively removed the main leachate contaminants: low-grade charcoal for antibiotics (initial concentration 1.05 mg/L, removal rate 73.4%), ABA for phosphate (initial concentration 2.53 mg/L, removal rate 99.9%), and zeolite for ammonium (initial concentration 38.92 mg/L, removal rate 100.0%). The optimal mix ratio for purifying leachate is 1:1:10 of low-grade charcoal, ABA, and zeolite. The average adsorbent usage per burial site was 1,800 kg, costing KRW 2,000,000 per ton. The cost for the minimum leachate volume (about 12.4 m³) per site is KRW 2,880,000, and for the maximum volume (about 19.7 m³) is KRW 4,620,000. These findings contribute to resolving issues related to livestock carcass burial sites and suggest post-management strategies by advocating for the effective use of adsorbents in leachate purification.