• 제목/요약/키워드: Product Design Process

검색결과 2,264건 처리시간 0.03초

정수처리를 위한 정밀여과막 모형플랜트의 장기운전 특성 (Long Term Operation of Microfiltration Membrane Pilot Plant for Drinking Water Treatment)

  • 김충환;이병구;임재림;김성수;이경혁;채선하
    • 상하수도학회지
    • /
    • 제21권4호
    • /
    • pp.493-501
    • /
    • 2007
  • The membrane pilot plant has being operated in the Hyeondo pumping station to find the optimal operation technique of Gong-Ju membrane water treatment plant (WTP) which is constructing in $250m^3/d$ scale. The pilot plant was consisted of two trains which can treat $30,000m^3/d$ per train. First train was operated for one year under the condition of flux $1m^3/m^2{\cdot}d$ while the effects of flux variation and addition of powdered activated carbon(PAC) were evaluated in second train. The turbidity of membrane product water of first train which is operated on Flux $1m^3/m^2{\cdot}d$ was always below 0.05 NTU regardless of raw water turbidity. And also, the trance-membrane pressure(TMP) was maintained at $0.3{\sim}0.5kgf/cm^2$ for about 9 months and increased rapidly to $1.8kgf/cm^2$ which is maximum operating TMP. However, TMP was rapidly increased to $1.8kgf/cm^2$ within 2 months as flux was increased from 1 to $2m^3/m^2{\cdot}d$, especially, within 10 days under high turbidity(30~50NTU). This reault means that if Gongju membrane WTP is operated in flux $1m^3/m^2{\cdot}d$, chemical cleaning period can be maintained over 6 months. Only 10% of dissolved organic carbon (DOC) was removed in membrane process while the removal efficiencies of manganese and iron were 60% and 77% respectively. However, because only solid manganese and iron were removed in membrane process, an additional process for treating soluble manganese is required if souble manganese is high in raw water. 70% of 70ng/L 2-MIB which is causing taste & odor was removed in powdered activated carbon (PAC) tank with 50mg/L PAC which is design concentration of Gongju WTP. In addition, TMP was reduced with addition of 50mg/L PAC regardless of flux. Because TMP was not influenced even if 100mg/L PAC was added, the high taste and odor problem can be controled by additional injection of PAC.

고로슬래그 미분말이 혼입된 자기충전 및 숏크리트용 ECC의 개발을 위한 시멘트풀 레올로지 제어 (Rheology Control of Cement Paste for Applying ECC Produced with Slag Particles to Self-Consolidating and Shotcreting Process)

  • 박승범;김정수;김윤용
    • 콘크리트학회논문집
    • /
    • 제20권1호
    • /
    • pp.67-75
    • /
    • 2008
  • 마이크로역학을 기초로 하여 Slag-ECC (고로슬래그 미분말이 혼입된 ECC)가 개발되었으며, 기존의 연구에서는 Slag-ECC가 높은 연성을 나타내도록 마이크로역학을 도입하여 재료의 배합비가 제시되었다. 이 연구에서는 Slag-ECC의 자기충전과 숏크리트 시공성을 구현하기 위하여, Slag-ECC의 기본 배합에 혼화재료의 투입 순서에 상관없이 혼화재료를 한번에 투입하여 유동 특성을 제어하는 레올로지 개념을 도입하였으며, 이는 현장에서 시공성을 높이기 위하여 모든 재료를 분말의 형태로 사용하는 프리팩키지화를 위한 기초 자료로 사용될 것이다. 그리고 자기충전과 숏크리트의 서로 상반되는 레올로지 특성을 구현하기 위하여, 시멘트풀 레올로지 경시 변화 연구를 통해 대략적인 혼화재료의 첨가량을 선정하였고, 자기충전 및 숏크리트의 시공성 검증을 통해 재료의 배합비를 최적화 하였다. 개발된 Slag-ECC의 자기충전성과 숏크리트 적합성은 실험을 통하여 입증되었으며, 자기충전 및 숏크리트의 시공 방법에 의하여 타설된 재료가 굳은 이후에도 Slag-ECC의 역학적 특성인 고인성 특성을 유지하는 것으로 나타났다. 따라서 시멘트풀의 레올로지 특성을 조절하여 개발된 자기충전용 Slag-ECC와 숏크리트용 Slag-ECC는 재료의 고인성 특성을 유지하면서 다양한 현장 적용이 가능할 것으로 판단된다.

식초 음료의 품질평가지표 개발에 관한 연구 - 델파이 및 AHP 기법을 중심으로 - (The Development of Quality Evaluation Index of Vinegar Beverage - Using Delphi Method and Analytical Hierarchical Process(AHP) -)

  • 김지형;고재윤;유은이
    • 한국조리학회지
    • /
    • 제22권4호
    • /
    • pp.288-301
    • /
    • 2016
  • 본 연구에서는 건강 음료로써 식초 음료 시장의 확대에 기여하고자 전문가들을 대상으로 설문하여 델파이와 AHP를 적용하여 식초 음료의 주된 요소들을 유형화, 계층화하였다. 따라서 문헌 연구와 전문가들의 브레인 스토밍을 통해 상위 개념인 원료, 생산방법, 제품특징, 기능성, 패키지 디자인의 5가지에 대해 개방형 설문으로 1차 델파이를 실시하였는데, 그 결과 하위 개념 50개를 도출하였고, 상위 개념으로 마케팅 1개를 추가하였다. 이렇게 1차 델파이에서 도출된 50개의 개념을 폐쇄형 설문으로 2차, 3차 델파이를 실시하였고, 의견의 일치성을 객관적으로 파악하고자 켄달의 W 검증을 실시한 결과, 2차 델파이에서는 11개 항목이 제거되었고, 3차 델파이에서는 16개 항목이 제거되어 총 23개 문항을 도출하였다. 마지막으로 델파이를 통해 도출된 23개 문항의 상대적 중요도를 파악하고자 쌍대 비교를 실시하여 각 항목 간 우선순위를 도출하여 식초 음료의 품질 평가 시, 중요하게 고려해야할 항목을 구성하였다.

전산모델링을 통한 투과증발-촉진 에스테르화 반응에 대한 연구 (A Parametric Study of Pervaporation-facilitated Esterification)

  • 염충균;최승학;박유인;장성순
    • 멤브레인
    • /
    • 제17권2호
    • /
    • pp.146-160
    • /
    • 2007
  • 본 연구에서는 불과 함께 에스테르화 반응물 및 생성물 일부가 친수성 막을 투과하는 비완전 분리를 고려한 투과증발-촉진 에스테르화 반응모델을 확립하였으며, 이 모사모델에 막 분리 효율 및 물 제거능력을 설명하는 항들을 포함시킴으로써 막 투과분리가 에스테르화 반응에 어떻게 영향을 끼치는가를 공정모사를 통해서 체계적으로 살펴보았다. 모사결과 막을 통한 비완전 분리 즉, 분리막을 통한 반응물의 투과는 역반응을 유발시켜 전체 반응을 지연시키며 그 결과 반응 전 환율은 투과증발 공정을 사용하지 않은 반응보다는 높으나 물에 대한 완전한 투과선택도를 갖는 투과증발 공정을 사용하는 반응시스템보다는 낮음을 알 수가 있었다. 반응 시스템 내에서 장착된 막을 통한 투과로 인한 반응부피의 변화가 반응 속도에 끼치는 영향을 살펴보았는데 반응 초기에는 반응물 농축효과가 지배적이어서 반응을 촉진시키며, 반응이 진행되어 생성물이 형성됨에 따라 생성물 농축효과가 점점 중요해지고 이 효과가 반응의 속도를 감소시킴을 알 수가 있었다. 에스테르화 반응공정 중에 투과증발공정을 적용하는 시점에 따라 반응속도, 반응 전화율이 달라짐을 공정모사를 통해 관찰하였다. 반응 모델 식으로부터 분리막의 성능과 반응 인자들 간의 상관관계는 확립하고 이 상관관계를 주어진 막 분리능력 하에서 반응 인자 조건 설정, 혹은 주어진 반응조건 하에서 막 분리능력을 설계하는 도구로 사용할 수 있다.

장신구 활용에 적합한 3D프린팅 방법론 비교 연구 (Comparative Study on the 3D Printing Methodology suitable for Jewelry)

  • 장진희;고승근
    • 한국융합학회논문지
    • /
    • 제11권2호
    • /
    • pp.225-230
    • /
    • 2020
  • 3D프린팅의 활용은 매우 혁신적이면서 유용한 기술이다. 하지만 장신구 분야에서는 3D프린팅 기술은 제작방법의 한 분야로서 한정적 으로 사용되는 기술이다. 이러한 3D프린팅의 한계를 극복하기 위해 3D프린팅 출력방식 중 가장 대중적이며 조형활동에 적합한 출력방식을 선정하고 출력시간, 조건을 한정하여 장신구에 적용 가능성을 알아보기 위해 비주조과정과 주조과정 각각의 방법을 통해 시제품까지 완성하고 이를 비교해 보았다. 그 결과, FDM출력 방식은 비용과 시간적인 측명에서 매우 긍정적인 장점이 있지만 표면에 적층구조가 지워지지 않으며 출력과정시 발생되는 필라멘트의 잔여물로 인해 선 조형을 표면시 완성도가 떨어지는 단점이 있었다. DLP출력방식은 표면처리가 고르며 완성도가 높은 반면, 비용과 시간적인 측면에서 효율성이 떨어지는 단점이 있었다. 하지만 두 출력방법 모두 장신구 활용 가능하며 향후 디자인에 맞는 다양한 출력방법연구가 이루어져 장신구에 3D 작품연구가 활발히 수행되기를 바란다.

2단 분류층 가스화기에서 합성가스 생성을 위한 석탄 슬러리 가스화에 대한 수치 해석적 연구 (Numerical simulation of gasification of coal-water slurry for production of synthesis gas in a two stage entrained gasifier)

  • 서동균;이선기;송순호;황정호
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 추계학술대회 논문집
    • /
    • pp.417-423
    • /
    • 2007
  • Oxy-gasification or oxygen-blown gasification, enables a clean and efficient use of coal and opens a promising way to CO2 capture. The coal gasification process of a slurry feed type, entrained-flow coal gasifier was numerically predicted in this paper. The purposes of this study are to develop an evaluation technique for design and performance optimization of coal gasifiers using a numerical simulation technique, and to confirm the validity of the model. By dividing the complicated coal gasification process into several simplified stages such as slurry evaporation, coal devolatilization, mixture fraction model and two-phase reactions coupled with turbulent flow and two-phase heat transfer, a comprehensive numerical model was constructed to simulate the coal gasification process. The influence of turbulence on the gas properties was taken into account by the PDF (Probability Density Function) model. A numerical simulation with the coal gasification model is performed on the Conoco-Philips type gasifier for IGCC plant. Gas temperature distribution and product gas composition are also presented. Numerical computations were performed to assess the effect of variation in oxygen to coal ratio and steam to coal ratio on reactive flow field. The concentration of major products, CO and H2 were calculated with varying oxygen to coal ratio (0.2-1.5) and steam to coal ratio(0.3-0.7). To verify the validity of predictions, predicted values of CO and H2 concentrations at the exit of the gasifier were compared with previous work of the same geometry and operating points. Predictions showed that the CO and H2 concentration increased gradually to its maximum value with increasing oxygen-coal and hydrogen-coal ratio and decreased. When the oxygen-coal ratio was between 0.8 and 1.2, and the steam-coal ratio was between 0.4 and 0.5, high values of CO and H2 were obtained. This study also deals with the comparison of CFD (Computational Flow Dynamics) and STATNJAN results which consider the objective gasifier as chemical equilibrium to know the effect of flow on objective gasifier compared to equilibrium. This study makes objective gasifier divided into a few ranges to study the evolution of the gasification locally. By this method, we can find that there are characteristics in the each scope divided.

  • PDF

부산지역 페인트제조시설의 VOC/HAPs 배출특성 및 흡착능 평가 (VOC/HAPs Emission Characteristics & Adsorption Evaluation for Paint Products in Busan Area)

  • 송복주;이승민;조갑제;조정구;유평종;김기곤
    • 대한환경공학회지
    • /
    • 제34권5호
    • /
    • pp.316-325
    • /
    • 2012
  • 페인트제조시설에서 다량 발생하는 VOC/HAPs은 물질별 독성, 발암성 등의 특징으로 미량으로도 인체에 유해할 뿐만 아니라, 하절기 오존 생성과 악취 민원의 원인물질로 작용하고 있어 이들 시설에 대한 배출특성과 제어방안에 대한 연구가 시급한 실정이다. 본 연구에서는 부산지역에 소재한 페인트제조시설 4개소를 선정하여 VOC/HAPs 주 배출공정 및 주요 오염물질을 도출하고 적절한 제어방안을 제시 하였으며, 천연소재인 Kapok fiber의 흡착 시험을 통하여 상용 흡착제로서의 적용 가능성을 평가하였다. 연구결과, 발생되는 VOC/HAPs의 60% 이상이 방지시설로 유입되지 않고 공장내부로 자연 휘발되어 외기로 확산되는 것으로 조사되었고 주요 물질로는 Toluene, Ethylbenzene, Xylene이 70% 이상의 분포를 나타내었다. 주요 악취 원인물질은 A, B, C사는 Toluene, D사는 m/p-Xylene으로 나타났으며, 악취방지시설인 활성탄 흡착시설의 평균 제거효율은 66.2%로 평가되었다. 이 결과를 토대로 오염물질의 외부확산을 최소화하기 위한 방안으로 중앙제어식 환기장치의 설치 등 다양한 제어방안과 함께 실제 운영시설의 규모를 고려한 흡착시설의 규격, 흡착제량, 교체주기 등을 산출 제시하여 현장에 적용 가능하도록 하였다. 도출된 원인물질을 표준시료로 활용하여 유통 활성탄과 천연소재인 Kapok fiber의 Toluene 흡착시험을 실시한 결과, 활성탄의 제거율은 대부분 99% 이상 우수한 것으로 나타났으나 Kapok fiber는 Space Velocity의 차이에 따라 91.9%, 66.7%의 제거효율을 나타내어 Kapok fiber의 흡착능은 미흡한 것으로 나타났으나, 저렴한 소재 가격, 친환경성 등을 감안한다면 기초 흡착제로서의 적용은 가능한 것으로 판단되었고 향후 상용화에 필요한 추가연구가 필요할 것으로 사료된다.

3차원 지형모델을 이용한 설계용 프로파일 생성 정확도 평가 (The Accuracy Estimation of Profile Generation for Planning using 3D Topographical Model)

  • 엄대용;이은수;김지혜
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
    • /
    • pp.892-896
    • /
    • 2008
  • 도로, 철도 및 운하 등을 비롯한 각종 건설공사를 위해서는 건설공사의 기본설계과정에서 건설예정지에 대한 지형측량을 실시하고 이를 기초로 종 횡단면도의 제작이 필수적인 요소이다. 본 연구에서는 건설예정지에 대한 프로파일 제작에 있어 NGIS구축사업에 의해 제작된 수치지형도의 지형정보를 이용하여 정밀 3차원지형모델을 구축하고, 이로부터 자동 프로파일을 생성하여 종 횡단면도로 활용할 수 있는 방안을 제안하고자 하였다. 이를 위해 수치지형도로부터 표고 및 주요시설물의 레이어를 각각 추출하고 이를 이용하여 정밀 3차원 지형모델을 구축하는 한편, 3차원 지형모델로부터 자동 프로파일을 생성하여 종횡단면도를 제작하였다. 그리고 생성된 프로파일의 경로에 대하여 지형측량을 실시하여 상호 분석함으로써 자동 생성된 프로파일의 정확도가 현지측량 정확도와 허용정확도를 만족시킬 수 있는지의 여부를 검토하였다. 본 연구의 결과는 건설공사를 위해 실시되는 기본설계과정에서 설계기간의 단축, 설계비용의 감소와 설계업무의 효율화를 꾀할 수 있는 새로운 개념의 프로파일 생성기법으로 제안할 수 있을 것으로 사료된다.

  • PDF

Lessons from Haitai Distribution Inc's experience in Korea

  • Cho, Young-Sang
    • 유통과학연구
    • /
    • 제9권3호
    • /
    • pp.25-36
    • /
    • 2011
  • Owing to the rapid growth of hypermarket/discount store formats since 1996, Korean retailing has suddenly attracted the significant attention from researchers. Before the emergence of large scale retailers such as E-Mart, Lotte Mart and Tesco Korea, there were the two retail formats who led the Korean retailing in the modern retailing history: department store and supermarket formats. Nevertheless, there has been little literature concerned about the two retail formats as a case study, while some authors have paid their attention to hypermarket/discount store formats. In addition, when mentioning the development process of retailing history, it is less likely that authors have made an effort to illustrate supermarket retailing history. In order to regard supermarket retailing as part of the Korean retailing, it is interesting to look at a representative supermarket retailer, Haitai, who was one of the subsidiaries of Haitai chaebol. Based on supermarket retailing, the company which was established as a joint venture in 1974 led a supermarket retailing in the Korean modernised retailing history. Before analysing whether Haitai failed or not, the definition of failure should be illustrated. With regard to the term, failure, in the academic world, authors have interchangeably used the following terms: failure, divestment, closure, organisational restructuring, and exit. To collect research data as a case study, the author adopted an in-depth interview method. The research is based on research interviews with 13 ex-staff who left after Haitai went bankruptcy, from store management department to merchandise department. By investigating Haitai's experiences through field interviews, the research found that Haitai restructured organisational decision-making process at the early stage when companies started to modernise organisational charts, benchmarking sophisticated retailing knowledge through the strategic alliance with a Japanese retailer. In respect of buying system, the company established firmly buying functions by adopting central buying system, and further, outstandingly allocated considerable marketing resources to the development of retailer brands with the dedicated team of retailer brand development. In the grocery retailing, abandoning a 'no-frill' packaging concept, the introduction of retailer brand packaging equal to, or better than national brand packaging design, encouraged other retailers to change their retailer brand development strategies. In product sourcing ways, Haitai organised for the first time the overseas sourcing team with the aim of improving the profit margins of foreign products and providing exotic products for customers, followed by other retailers. Regarding distribution system, the company introduced the innovative idea which delivered products ordered by stores directly to each store withboth its own vehicles and its own warehouse in which could deal with dry foods, chilly foods, frozen food, and non-foods, and even, process produce. In addition, Haitai developed many promotional methods to attract more customers like 'the guarantee of the lowest price', and expanded its own business to US in 1996, although withdrew, because of bankruptcy in 1997. Together with POS introduction in 1994, Haitai made a significant contribution to the development of the Korean retailing, influencing other retailers in many aspects. As a case study, the study has provided a number of lessons from Haitai's experiences for academicians and practitioners, suggesting that its history should be involved in the Korean modernised retailing.

  • PDF

원료 배합에 따른 칼슘 실리케이트 시멘트 클링커의 성분 및 상 분석 (Component and Phase Analysis of Calcium Silicate Cement Clinker by Raw Materials Mix Design)

  • 이향선;송훈
    • 한국건축시공학회지
    • /
    • 제22권3호
    • /
    • pp.251-258
    • /
    • 2022
  • 시멘트산업에서는 CO2 배출량 감축을 위해 원료대체 및 전환기술, 저탄소 신열원 활용 공정효율 향상기술, 공정발생 CO2 포집 및 재자원화 기술 개발이 진행되고 있다. 공정발생 CO2 포집 및 재자원화는 대규모로 배출되는 배기가스에서 CO2를 분리 및 포집하는 기술로 지중저장과 해양저장, 탄산염 광물화로 크게 세 가지로 나뉜다. 이에 본 연구에서는 CO2를 탄산염광물로 저장할 수 있는 CSC를 개발하고자 기초 실험을 진행하였다. 클링커 원료 배합에서 SiO2/(CaO+SiO2) 몰비가 다른 세 가지의 CSC 클링커를 제작하여 클링커의 성분 및 상 분석을 진행하였다. 제조한 CSC 클링커는 Wollastonite와 Rankinite가 생성되었다. 또한, CSC 페이스트 탄산화 시험편은 탄산화 생성물로 Calcite가 생성되었음을 확인할 수 있었다. CSC 클링커와 CSC 탄산화 시험편은 CSC 클링커 화학조성에서 SiO2/(CaO+SiO2) 몰비가 낮을수록 Wollastonite 생성량이 감소하고 Rankinite의 생성량이 증가하였고, CSC 페이스트 시험편의 탄산화 진행에 따라 Calcite 생성량이 증가하였다. 이는 Rankinite가 Wollastonite보다 CO2를 광물화하는데 반응성이 높은 것으로 판단된다.