• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1891-1895
• /
• 2003

Switch-mode power supplies (SMPS) have become a major source of conducted electromagnetic interference (EMI) which is the combination between differential mode (DM) noise and common mode (CM) noise. This paper presents the conducted EMI reduction approach in flyback switched mode power supply by rerouting for circuit balance to reduce common mode noise. And differential mode noise can be reduce by adding $c_x$ capacitor across the input power line, and passive element to the gate drive of switching device MOSFET to slow down the switching times. This combination of our approach is the effective way to reduce the conducted EMI and it is also a cost effective for product design

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.689-700
• /
• 1997

There are many difficulties in designing the engine structure properly due to the strong conflicts between NVH characteristics and the high performance, light weight and low product cost. Many feasible noise reduction techniques should be carefully incorporated to meet such stringent noise requirements. It is also required that the engine development be carried out by introducing concurrent engineering, in which the analysis and test database are usefully applied to the detail designs from the 1st stage. This paper reviews the significance of the noise characteristics of the structure elements in relation to the combustion pressure. The mechanisms of the crank shaft rumbling, which is the main source having the bad influence on the sound quality, are also explained. The influences of dynamic behavior of engine structure on its noise are investigated, followed by discussions on experimental results of the features necessary for the design of low noise engine concepts.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.16-23
• /
• 2004

Recently the increased concerns about the cost reduction and environmental protection make the paper industry increase the closure level of papermaking system, which results in the buildup of organic and inorganic materials in the papermaking process water. Increase of the system closure causes deterioration of additive performance and provokes diverse problems in papermaking process and product quality. To investigate the effects of process water quality on the physical properties of fine papers handsheets were prepared with process water containing various amounts of inorganic and organic contaminants including calcium or sodium ions and oxidized or cationic starches. Inorgainc and organic materials did not show any significant effect on the physical properties of handsheets. Recycled GCC showed the same trends as inorganic and organic materials. The performance of cationic starch was deteriorated, however, in the recycled white water, which resulted in the reduction of tensile index of handsheets.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.11 s.242
• /
• pp.1277-1284
• /
• 2005

The combustion characteristics of methane oxygen diffusion flames have been investigated to give basic information for designing industrial oxyfuel combustors. NOx reduction has become one of the most determining factors in the combustor design since the small amount of nitrogen is included from the current low cost oxygen production process. Flame lengths decreased with increasing fuel or oxygen velocity because of the enhancement of mixing effect. Correlation equation between flame length and turbulent kinetic energy was proposed. NOx concentration was reduced with increasing fuel or oxygen velocity because of the enhanced entrainment of the product gas into flame zone as well as the reduction of residence time in combustion zone.

• Archives of Plastic Surgery
• /
• v.40 no.5
• /
• pp.589-596
• /
• 2013

Background The treatment of pressure ulcers is complicated, given the various wound dressing products available. The cost of different treatments varies and the cost-effectiveness of each product has not been thoroughly evaluated. We compare two wound dressing protocols-alginate silver dressing (AlSD) and silver zinc sulfadiazine cream (AgZnSD) with regard to wound healing and cost-effectiveness Methods Patients with grade III or IV sacral or trochanteric pressure ulcers were eligible for this prospective, randomized controlled trial. The patients were randomized to receive one of the two dressings for an eight-week period. The criteria of efficacy were based on the Pressure Ulcer Scale for Healing (PUSH) scoring tool. The cost of treatment was also assessed. Results Twenty patients (12 women and 8 men) were randomly assigned to receive either AlSD (n=10) or AgZnSD cream (n=10). The demographic data and wound characteristics were comparable in the two groups. The two groups showed no significant difference in the reduction of PUSH score, wound size, or volume of exudate. The tissue type score was significantly lower in the AlSD group ($3.15{\pm}0.68-1.85{\pm}0.68$ vs. $2.73{\pm}0.79-2.2{\pm}0.41$; P=0.015). The cost of treatment was significantly lower in the AlSD group (377.17 vs. 467.74 USD, respectively; P<0.0001). Conclusions Alginate silver dressing could be effectively used in the treatment of grade III and IV pressure ulcers. It can improve wound tissue characteristics and is cost-effective.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.1
• /
• pp.17-23
• /
• 2010

The corporate R&D(Research and Development) has a primary role of new product development and its potential is the most crucial factor to estimate corporate future value. However, its systemic inadequacies and inefficiencies, the shorten product life-cycle to satisfy customer needs, the global operations by outsourcing strategy, and the reduction of product cost, are starting to expose to R&D business processes. The three-phased execution strategy for R&D innovation is introduced to establish master plan for new R&D model. From information technology point of view, PLM(Product Life-cycle Management) is one of the business total solutions in product development area. It is not a system, but the strategic business approach that collaboratively manage the product from beginning stage to end of life in all business areas PLM functions and capabilities are usually used as references to re-design new R&D process. BPA(Business Process Assessment) and 5DP(Design Parameters) in PI6sigma developed by Samsung SDS Consulting division are introduced to establish R&D master plan and re-design process respectively. This research provides a case study for R&D process innovation. How process assessment and PMM(Process Maturity Model) can be applied in business processes, and also it explains process re-design by 5DP method.

• Journal of Distribution Science
• /
• v.10 no.10
• /
• pp.25-33
• /
• 2012

Purpose - The Garak agricultural wholesale market ('Garak Market') plays a central role in the distribution of agricultural products in Korea and is important in connecting consumers with producers. However, problems regarding inefficiencies and the high-cost structure of the wholesale market's distribution/logistical system are being raised in relation to severe competition among retailers. Furthermore, the service needs of retailers and market users are not being fulfilled due to the inconsistency of the wholesale market's functions and facilities, thus reducing the competitiveness of the market. In this regard, innovative changes are being requested of the agricultural wholesale market according to changes in the agricultural product distribution environment. In particular, the lack of unloading facilities and the outdated unloading system of the wholesale market must be improved to enhance system efficiency. Research design, data, and methodology - This study observed the problems of the unloading system of the agricultural wholesale market in order to present relevant measures for improvement. The need for unloading auctions was also researched in this study. The survey of 70 forwarders belonging to the producing district distributor association of the Garak market was conducted by post. Additionally, 20 auction dealers and 59 shippers and transporters were individually interviewed. The survey on the need for unloading auctions used five-point Likert Scales. The statistical analysis was conducted with SPSS WIN 12.0 software. Results - First, the wholesale market must employ members of the unloading labor union to allow these employees to directly manage the unloading process. Second, it is crucial to revise regulations to ensure that the principal agent pays the unloading cost according to the standard unloading cost system. Third, the vehicle auction carried out for certain vegetable products must be converted to the unloaded auction system. According to the related interviews with the wholesale market's distribution agents, whereas shippers and transporters recognized the need for unloaded auctions, auction dealers tend to have a negative view of this system. Furthermore, the stated reasons in favor of unloaded cabbage, radish, and other vegetable auctions were prevention of constraint, creation of transparent trade conditions, and reduction of corrected seller tickets. Many of the respondents answered that the transport cost reduction rate in unloaded auctions must be below 20%. Fourth, the unloading system must be mechanized and a detailed, reasonable plan must be provided to settle the existing conflict with the unloading labor union. Conclusions - The proposals in this study are expected to play an important role in improving the cargo handling system of the wholesale agricultural product market in the future. Improving the system is expected to help shore up the competitiveness of the industry. If all the related bodies closely cooperate with each other and work harder, taking advantage of the synergies created by the facility modernization project, the Garak market will play a pivotal role in the distribution of agricultural products.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.811-823
• /
• 2000

In design and manufacturing airframe structures which are composed of a lot of sub-assemblies and large complex profile shapes it is difficult to reduce so called hardware variations. Accordingly cost increasing factors for manufacturing airframe parts are much more than other machine parts because of the variability of fabricated details and assemlies. To improve cost and quality, accurate assembly methods and DPD techniques are proposed in this paper which are based upon using CAD/CAM techniques, the concept of KC's and the coordinated datum and index throughout the design, tooling, manufacturing and inspection. The proposed methods are applied to produce fuselage frame assemblies and related engineering aspects are described regarding the design of parts and tools in the context of concurrent digital definition. First articles and consequent mass production of frame assemblies shows a great improvement of the process capability ratio from 0.7 by the past processes to 1.0 by the proposed methods in addition to the cost reduction due to the less number of tools, reduced total assembly times and the space compaction needed by massive inventory. The need to achieve better Cpk, however, and future studies to be investigated will be addressed briefly.

• Composites Research
• /
• v.27 no.6
• /
• pp.231-235
• /
• 2014

Autoclave processing has a good quality of product, but manufacturing cost is expansive. After curing of composite, the unwanted deformation and distortion increase the manufacturing cost by redesign of tool parts. Therefore, manufacturing cost down is a big issue in processing level. For the reduction of tool costs, it is important to investigate the effects of tool materials and tool surface conditions. In this paper, we organized user subroutine in ABAQUS to consider the thermal effects of part and tool, and the results are compared with commercial code, COMPRO. And this paper suggests reference point for the selection of tool materials to reduce manufacturing costs.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.111-118
• /
• 2023

The International Commission on Radiological Protection (ICRP) 103 recommends a cost-benefit analysis method as an auxiliary tool for scientific and rational decision-making for the principle of optimization of radiological protection. In order to conduct a cost-benefit analysis, the safety improvement of nuclear power by regulation must be measured and converted into monetary terms. The improvement of nuclear safety can be measured by reducing the radiation exposure dose of the people, and it is necessary to determine the coefficient to convert the radiation exposure dose into money. The monetary coefficient is calculated as the product of the statistical life value (VSL) and the nominal risk coefficient. In order to derive the monetary coefficient, the willingness to pay (WTP) can be estimated using the contingent valuation method (CVM), which quantifies the value of non-market goods by converting them into monetary units. WTP can be estimated based on the random utility model, which is the basic model for bivariate selection type conditional value measurement data. Statistical life value can be calculated using the estimated WTP and reduction in early mortality, and a monetary coefficient can be derived.