• Journal of Chest Surgery
• /
• v.31 no.10
• /
• pp.952-963
• /
• 1998

Background: Cardiopulmonary bypass(CPB)-induced hemostatic defects may result increased possibility of excessive hemorrhage and additional multiple transfusion reactions or reoperation. Particularly, fibrinolytic activation and decreased platelet count and function by CPB were proposed as a predictor of hemorrhage during postoperative periods in several reports. Materials and methods: Present study, which was conducted in 20 adult patients undergoing CPB, was prospectively designed to examine the hematologic changes, including fibrinolytic activation during and after CPB and to clarify the relationships between these changes and the magnitude of the postoperative nonsurgical blood loss. The serial blood samples for measurment of hematologic parameters were taken during operation and postoperative periods. Blood loss was respectively counted via thoracic catheter drainage at postoperative 3, 6, 12, 24, 48 hours and total period. Results: The results were obtained as follows:Platelet count rapidly declined following CPB(p<0.01), which its decreasing rate was an inverse proportion to total bypass time(TBT, r=0.55, p=0.01), And platelet count in postoperative 7th day was barely near to its control value. Fibrinogen degradating product(FDP) and D-dimer level significantly increased during CPB(p<0.0001, p<0.0001, respectively), and both of fibrinogen and plasminogen concentration correlatively decreased during CPB(r=0.57, p<0.01), implying activation of fibrinolytic system. Postoperative bleeding time (BT), postoperative activated partial thromboplastin time(aPTT) and postoperative prothrombin time (PT) were significantly prolonged as compare with each control value (p=0.05, p<0.0001, p<0.0001, respectively). Total blood loss was positively correlated with patient's age, aortic clamping time (ACT) and TBT, while there was negative correlation between platelet count and blood loss at pre-CPB, CPB-off and the 1st postoperative day, and in some periods. Postoperative aPTT and postoperative PTwere positively related to postoperative 6 hr and 48 hr blood loss(r=0.53, p=0.02; r=0.43, p=0.05) but not to total blood loss, whereas there was no relationship between postoperative BT and blood loss at any period. Conclusions: These observations suggest that CPB results various hematologic changes, including fibrinolytic activation and severe reduction in platelet count. Diverse factors such as age, platelet count, ACT, TBT and postoperative aPTT and PT may magnify the postoperative bleeding. This study will be a basic reference in understanding CPB-induced hemostatic injuries and in decreasing the postoperative hemorrhage

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.257-263
• /
• 2006

This experiment was conducted to investigate the optimal media for 'Pechika' ever-bearing strawberry grown in hydroponic culture system in summer highland. Three mixed media (1:1, v/v) of peatmoss with perlite, rice hull, and granular rockwool, and four solution strengths of EC 0.5, 0.75, 1.0 and $1.25 dS{\cdot}m^{-1}$ were tested. Root zone temperature in peatmoss+perlite media was 1 to $3^{\circ}C$ lower than in the other media. The culture medium of mixing to peat moss and perlite was most effective in producing good yield and fruit quality. The culture medium of mixing to peat moss and perlite was the highest about 1,632kg/10a to yield yearly average, but was very undulating 732 kg/10a to yield in 2004 year and 3,013kg/10a in 2003 year. The deformed fruits were increased when the solution strength was increased, especially in EC $1.25dS{\cdot}m^{-1}$. The soluble solids and the acidity content of fruits were increased with higher solution strength regardless of media. The uptake of Ca and Mg was inhibited at higher solution strength, and the uptake of N, P and K was promoted. Therefore, the culture medium of mixing to peat moss and perlite was the most suitable culture medium to product strawberry in summer, because it had the highest yield even though fruit quality among treatments was not significant.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.8-9
• /
• 2017

Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.28-37
• /
• 2017

Mineral trioxide aggregate have been used for many years as a pulp therapy material. The most widely used product, Proroot white $MTA^{(R)}$ has a major drawback that it causes tooth discoloration. This study assessed discoloration of crown when various MTA-based materials were placed in the coronal aspect of the root canal. Seventy-five single-rooted, unrestored premolar teeth were selected. The teeth were randomly assigned to four experimental groups, each of $Biodentine^{(R)}$, Proroot $wMTA^{(R)}$, $Endocem^{(R)}$, $RetroMTA^{(R)}$ and one negative control groups. Color measurements were utilized by the Commission International de I'Eclairage's L*a*b* system with spectrophotometer. The color was assessed eight times : initial, 1 day, 1 week, 2 weeks, 4 weeks, 8 weeks, 12 weeks, and 16 weeks after the placement. Statistical analysis was performed using the 2-way repeated analysis of variance and Bonferroni's method with p < 0.05. Proroot $wMTA^{(R)}$ induced significant decreases in $L^*$ values during experiment period. Tooth samples from the $Endocem^{(R)}$ group presented indistinct grayish color changes. The $Biodentine^{(R)}$ and $RetroMTA^{(R)}$ showed color stability. Consequently, while Proroot $wMTA^{(R)}$ and $Endocem^{(R)}$ that contain bismuth oxide as a radiopacifier showed tooth discoloration, displayed no sign of discoloration $Biodentine^{(R)}$ and $RetroMTA^{(R)}$ that contain zirconium oxide as a radiopacifier.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.47-61
• /
• 2009

The purpose of this study was to understand the laws related to the safety management of children's play facilities(LRSMCPF) including the "Safety Supervision Law of Children's Play Facilities(SSLCPF)" and the "Quality Management and Industrial Products Safety Management Law(QMIPSAL)", in order to analyze the problems by 4 phases-development of products, landscape design, landscape construction and maintenance considering landscape project procedure-and to propose a revision of the laws. The results are as follows: 1. The various LRSMCPF, SSLCPF and QMIPSAL, as basic laws for the safety management of children's play facilities, were insufficient regarding the features of children's play facilities and play spaces, which are both comparatively varied and complex. 2. In development of products, the one-year duration of safety certification based on QMIPSAL was too short and the procedure for safety certification were redundant in both products and plants inspection, and export and import product inspection. 3. The field inspection of construction sites based on SSLCPF was repeated with quality control and a consultation of rules based on "Construction Technology Management Law". 4. There are not enough safety inspection organizations regarding children's play facilities to meet the demand of safety certification, safety inspection, and safety education in the near future. 5. For children's play safety, the establishment of a general safety management system for children's play connected with the phases is needed to ensure safe play equipment, to construct safe playgrounds, and to manage play facilities. The criteria, regulations, and procedure regarding safety certification and safety inspection of play facilities must be revised efficiently and standardized to a global level as well. To improve the system and contents of safety certification and inspection, authorization of safety inspection organizations based on landscape architecture is needed. Further study will be required to concretely analyze in detail the laws, enforcement decrees and rules, and ordinances that consider the practical experience of professional landscape architects, inspectors, and lawyers.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.287-296
• /
• 2008

The purpose of this in vitro study was to compare the remineralization effect of commercially available anticariogenic products, exactly low level fluoride mouthrinse(500 ppm NaF), tooth cream with Casein phosphopeptide-amorphous calcium phosphate(CPP-ACP) and fluoride mouthrinse plus tooth cream on artificial caries lesion. Artificial caries lesion was induced at the buccal surface of permanent third molar and the specimens were then divided(16 specimens/group) into four group. Twice a day during 28 days specimens of each group were treated with a commercially anticariogenic product as follows and applied to the pH cycling system. Group 1: control group (No treatment) Group 2: Tooth $Mousse^{(R)}$ (GC Co. Japan) Group 3: $chikachika^{(R)}$ (Samil Co. Korea) Group 4: $chikachika^{(R)}$+Tooth Mousse$^{(R)}$ The long-term change of mineral loss(${\Delta}Q$) was evaluated by quantitative light-induced fluorescence (QLF) and the following results were obtained: 1. ${\Delta}Q$ of Group 1 was not noticed statistically significant during 28 days comparing that prior to treatment. There was a statistically significant increase in ${\Delta}Q$ of Group 2 and 3 since 14 days. So was in ${\Delta}Q$ of Group 4 since 7 days. 2. ${\Delta}Q$ was increased as follows: Group 1< Group 2, 3< Group 4. 3. Comparing with Group 1, Group 2 was a statistically significant increase since 7 days and Group 3 and 4 were since 3 days. Comparing Group 2 with 3, there was not noticed statistically significant during whole duration. Group 4 was significantly higher than Group 2 and 3 after 28 days. 4. All groups demonstrated a decrease in the rate of remineralization as time goes on.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.312-322
• /
• 2006

The objectives of this study were to evaluate the effect of surface roughness on the surface color and translucency of the composite resins. Two composite resins (Esthet-X, Dentsply, Milford, USA and Charisma, Kulzer, Domagen, Germany) were used to investigate the surface color. Charisma was used to investigate the translucency. 40 disc samples (diameter: 8 mm, thickness: 5 mm) were made by each product to measure the surface color. Polymerized each sample's one side was treated by Sof-Lex finishing and polishing system (Group C, M, F, SF). 40 disc samples (diameter: 6 mm, thickness: 1 mm) were prepared to measure the opacity. 1 mm samples were ground one side with #600, #1000, #1500 and #2000 sandpapers. CIE $L^{*}a^{*}b^{*}$ values of each 5 mm thickness samples, and XYZ values of 1 mm thickness samples on the white and black background were measured with spectrophotometer (Spectrolino, GretagMacbeth, Regensdorf, Switzerland). Mean surface roughness (Ra) of all samples before and after surface treatment was measured using the Surface Roughness Tester SJ-301 (Mytutoyo, Tokyo, Japan). Regardless of type and shade of the composite resin, $L^{*}$ values measured in group C were higher than others (p < 0.05), and $L^{*}$ value decreased as the Ra value decreased except B3 shade of Esthet-X. But there were no significant difference in $a^{*}$ values among groups. In control group and SF, highest $b^{*}$ values were measured (p < 0.05), except B1 shade of Esthet-X. Contrast ratio decreased as the Ra value decreased (p < 0.05). With the above results, difference of surface roughness has influence on surface color and translucency of dental composite resins.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1545-1554
• /
• 2010

Korean government will set up the nationwide food safety system with strict control of hazardous nutrients like sugar, fatty acids and sodium as well as advanced nutrition education system. In addition, almost one hundred percent of school food service rate forced the government to consider more effective ways to upgrade the nutritional status of school meals. The object of our study was to provide the data on content and consumption of sugar in school meal for the nationwide project. For this purpose, we surveyed the sugar content of 842 school meal menus and their intake level for 154 days in 8 schools in Daejeon and Chungcheong Province. Sugar contents, the sum of the quantity of 5 sugars commonly detected in food, were analysed with HPLC-RID (Refractive Index Detector). Sugar intakes were calculated by multiplying the intake of each menu to the sugar content of that menu. The sugar content was highest in the desserts, which include fruit juices, dairy products and fruits. Sugar content of side dish was high in sauces and braised foods. Sugar intake from one dish is high in beverage and dairy product, and one dish meals contribute greatly to sugar intake because of their large amount of meal intake. The average lunch meal intakes of second grade and fifth grade elementary school students were 244 g/meal and 304 g/meal, respectively. The meal intake of middle school student was 401 g/meal. The average sugar intake from one day school lunch was 4.22 g (4.03 g on elementary and 5.31 g on middle school student), which is less than 10% of daily sugar reference value for Koreans. The result of this study provides exact data of sugar intake pattern based on the content of sugar which is matched directly to the meals consumed by the students.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.83-94
• /
• 2011

Most domestic companies, with the exclusion of major firms, are reluctant to implement a supply chain management (SCM) network into their operations. Most small- and medium-sized enterprises are not even aware of SCM. Due to the inherent total-systems efficiency of SCM, it coordinates domestic manufacturers, subcontractors, distributors, and physical distributors and cuts down on cost of inventory control, as well as demand management. Furthermore, a lack of SCM causes a decrease in competitiveness for domestic companies. The reason lies in the fundamentality of SCM, which is the characteristic of information sharing, process innovation throughout SCM, and the vast range of problems the SCM management tool is able to address. This study suggests the contemplation and reformation of the current SCM situation by analyzing the SCM strategic plan, discourses and logical discussions on the topic, and a successful case for adapting SCM; hence, the study plans to productively "process" SCM. First, it is necessary to contemplate the theoretical background of SCM before discussing how to successfully process SCM. I will describe the concept and background of SCM in Chapter 2, with a definition of SCM, types of SCM promotional activities, fields of SCM, necessity of applying SCM, and the effects of SCM. All of the defects in currently processing SCM will be introduced in Chapter 3. Discussion items include the following: the Bullwhip Effect; the breakdown in supply chain and sales networks due to e-business; the issue that even though the key to a successful SCM is cooperation between the production and distribution company, during the process of SCM, the companies, many times, put their profits first, resulting in a possible defect in demands estimation. Furthermore, the problems of processing SCM in a domestic distribution-production company concern Information Technology; for example, the new system introduced to the company is not compatible with the pre-existing document architecture. Second, for effective management, distribution and production companies should cooperate and enhance their partnership in the aspect of the corporation; however, in reality, this seldom occurs. Third, in the aspect of the work process, introducing SCM could provoke corporations during the integration of the distribution-production process. Fourth, to increase the achievement of the SCM strategy process, they need to set up a cross-functional team; however, many times, business partners lack the cooperation and business-information sharing tools necessary to effect the transition to SCM. Chapter 4 will address an SCM strategic plan and a case study of LG Electronics. The purpose of the strategic plan, strategic plans for types of business, adopting SCM in a distribution company, and the global supply chain process of LG Electronics will be introduced. The conclusion of the study is located in Chapter 5, which addresses the issue of the fierce competition that companies currently face in the global market environment and their increased investment in SCM, in order to better cope with short product life cycle and high customer expectations. The SCM management system has evolved through the adaptation of improved information, communication, and transportation technologies; now, it demands the utilization of various strategic resources. The introduction of SCM provides benefits to the management of a network of interconnected businesses by securing customer loyalty with cost and time savings, derived through the consolidation of many distribution systems; additionally, SCM helps enterprises form a wide range of marketing strategies. Thus, we could conclude that not only the distributors but all types of businesses should adopt the systems approach to supply chain strategies. SCM deals with the basic stream of distribution and increases the value of a company by replacing physical distribution with information. By the company obtaining and sharing ready information, it is able to create customer satisfaction at the end point of delivery to the consumer.

• The Korea Journal of Herbology
• /
• v.27 no.2
• /
• pp.1-16
• /
• 2012

Objective : To investigate the current status of prescription drugs in Oriental medical institutes and to draw up a future plan for the revitalization of Oriental medical health insurance, this survey has been performed. Method : The survey has been made with 321 doctors working at Oriental medical institutes in Daegu and Kyungbuk areas for a period of 3 month from June 1, 2010 until September 1, 2010. Result : 1. When it comes to the current status of the use of herbal drugs in Oriental Health insurance, most of doctors surveyed prescribe insurance drugs, and they prescribe insurance drugs to patients, who are less than 20% of total patients visiting their clinics. 2. The awareness of Herbal Health Care Drugs is investigated. When it comes to the understanding of the difference between insurance drugs(powder type drugs) and granular type drugs, doctors admit that they differ only in one aspect, whether or not their being covered by health insurance. Based on the survey results on the understanding of insurance coverage of granular type drugs, doctors, even though they long for granular type drugs to be accepted as insurance drugs, are worrying whether the number of outpatients might dwindle due to increased insurance co-payments. They also point out that the biggest obstacles in the expansion of the granular type drugs as insurance drugs are the lack of understanding of the government and the objection of the Health Insurance Review and Assesment service (HIRA) for fear of increased insurance claims. 3. Upon investigation on Oriental medicine doctors' understandings of herbal pharmaceutical industry, it is found that doctors' responses on pharmaceutical industry are not all positive ones('new product development and neglect of R&D infrastructure' and 'smallness of industry'). When it is investigated what area needs the greatest improvement in herbal pharmaceutical industry, 'securing sufficient capital, good manufacturing, and strengthening quality control', is the highest. 4. When it is asked what are the most needed in order to improve herbal health insurance medicine, responses such as 'the increase in the accessibility to and the utilization of Oriental medical clinics through the diversification of the means of prescriptions', 'the improvement of insurance benefits(cap adjustments)', 'increase the proportion of high quality medicinal plants', 'the ceiling of co-payments(deductible) at 20,000 won or more', 'expansion of the choices of formulations', 'formulational expansions of tablets and pills', and finally 'admittance and expansion of granular type drug as insurance drug' are the highest. 5. Upon investigating the general characteristics of the current status of the usage of Oriental health care herbal drugs, the followings are observed. First, the frequency of use of health insurance drugs by the doctors who use health insurance with general characteristics shows similar differences in case of total monthly sales amount (p<0.001), average number of daily patients (p<0.05). Secondly, as to the willingness of the expanded usage of insurance drugs, similar differences are observed in case of total monthly sales amount (p<0.05). 6. Upon investigating the general characteristics of the perception of Herbal health care drugs, the followings are observed. First, inspecting general characteristics and insurance claims due to increased co-payments(deductible amount) reveals similar differences in case of working period (p<0.01) and in case of total monthly sales amount (p <0.01). Secondly, inspecting general characteristics and the obstacles that hinder granular type drugs from being accepted as health care insurance drugs shows similar differences in case of working period (p<0.05). 7. Upon investigating the general characteristics of the understanding of Oriental Herbal pharmaceutical companies, the followings are observed. First, opinions on the general characteristics of pharmaceutical companies, when examined with variance analysis, shows similar differences in case of total monthly sales amount (p<0.05). Secondly, when opinions are examined on general characteristics and the problems of herbal pharmaceutical companies, similar differences are found in case of working period (p<0.01) and in case of total monthly sales amount (p<0.001). Lastly, opinions on the general characteristics and reforms of pharmaceutical companies, similar differences are observed in case of working period (p<0.001). 8. Upon investigating the general characteristics of the improvement of insurance Herbal drugs, the followings are observed. First, regarding general characteristics and insurance benefits, similar differences are observed in case of working period (p<0.05), in case of total monthly sales amount (p<0.05), and in case of average number of daily patients (p<0.01). Secondly, opinions on the general characteristics and the needs for the improvement of Herbal insurance drugs are examined in 5 different aspects, which are the approval of granular type drugs as insurance drugs, the expanded practices of the number of prescription insurance drugs, the needs of a variety of formulations, the needs of TFT of which numbers of Oriental medical doctors are members for the revision of the existing system, and the needs of adjusting the current ceiling of the fixed amount and the fixed rate. When processed by the analysis of variance, the results show similar differences in case of average number of daily patients (p<0.01). Conclusion : From the results of this study the first measures to take are, to reform overall insurance benefit system, including insurance co-payment system(fixed rate cap adjustment), to expand the number of the herbal drugs to be prescribed matching with insurance benefit accordingly, and to revitalize herbal medicine insurance system through the change of various formulations. In addition, it is recommended to improve the effectiveness of herbal medicine by making plans to enhance the efficacy of herbal medicine and by enabling small pharmaceutical companies to outgrow themselves.