• Industrial Engineering and Management Systems
• /
• 제13권2호
• /
• pp.203-209
• /
• 2014

This research designed and implemented a supply chain risk management platform and applied it to a case study of reduced-fat Lanna pork sausage as a new product development project. The proposed framework has three stages: risk identification, risk assessment, and risk mitigation. Seventeen risk agents with 17 risk events were identified based on SWOT analysis and the Porter Five Forces concept through the process of planning, sourcing, making and delivering, partially captured from the supply chain operations reference model in the first stage. In the second stage, an house of risk (HOR) framework was applied to present the impacts of each risk agent. In the third stage, eight risk agents with high impact were selected to design 21 preventive actions. Finally, three preventive actions with the highest effectiveness to difficulty ratio scores-'sales evaluation of familiar products', 'increasing distribution channels and promotions to improve sales', and 'work flow improvement for work safety'-were then recommended for this new product development.

• 한국수산과학회지
• /
• 제55권4호
• /
• pp.425-430
• /
• 2022

This study was designed to verify the shelf-life of a freeze dried-block type of convenience food for rockfish Sebastes schlegeli seaweed soup product stored at different storing temperatures (25, 35, and 45℃) for 5 months. The polyunsaturated:saturated fatty acid ratio of the product stored at 25℃ was higher than that of products stored at 35℃ and 45℃ for 5 months. The colorimetric assessment indicated a noticeable decrease in the brightness of product color after 5months of storage at 35℃ and 45℃. Increased storage temperature and time negatively affected the product color. The products stored at 35℃ and/or 45℃ for more than 3 months tended to be more yellowish-red in color than those stored at 25℃ for shorter periods. No disease-causing microorganisms, including Escherichia coli and Staphylococcus aureus, posing health hazards to the human, were detected on food safety evaluation, regardless of storage conditions. Based on food visual shelf life simulator the shelf life of the rockfish seaweed soup was estimated approximately 22 months, considering the data from yellowness the safety factor of 0.7.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.120-125
• /
• 2016

Usually, a risk can be expressed as a product of likelihood and consequence of a hazard factor. Therefore, conventional risk assessment is carried out by frequency analysis and severity analysis, in turns. However, it is well known that intuitive thinking is another excellent way of thinking of human beings. This study aimed to confirm whether there exist any difference in risk assessment results derived by two different procedures - intuitive and analytical. Thus, the present study showed 10 different illustrations to 30 undergraduate students. Their responses were organized as fuzzy membership functions, and summarized as risk assessments, and compared. The results were also verified with the help of statistical hypothesis testing, which showed no significant difference. On the contrary, however, similarity measure used in fuzzy set theory was not credible as anticipated. Many cases failed to satisfy statistical hypothesis even with similarity measure higher than 0.60 so that only a trend could be accepted. In addition, a subject showed a somewhat consistent logical discrepancy in his response, which implied the necessity of sincere analysis in fuzzy formulations.

• 한국전문물리치료학회지
• /
• 제9권2호
• /
• pp.133-144
• /
• 2002

The purpose of this study was to establish reliability of the Tone Assessment Scale (TAS) translated into Korean in patients with stroke. The TAS consists of resting posture, response to passive movement, and associated reaction to active effort. Fifteen patients (14 males, 1 female) were examined by two raters. Surface electromyography (EMG) data at elbow flexor muscle and joint excursion were collected from 6 patients. To identify the correlation between muscle activity and angular changes of elbow muscle, Pearson product moment correlation was used. The inter-rater and intra-rater reliability of the TAS ranged from very good to good (K/Kw=.61~1.00 for intra-rater and K/Kw=.73~1.00 for intra-rater comparisons) in the sections of resting posture and associated reaction. However, in the section of response to passive movement, the reliability coefficients ranged from very good to fair (Kw=.29~1.00). In the 11th item, correlation between EMG ratio of elbow flexor and angular changes of elbow joint showed statistically strong positive relationship (r=.94, p<.05). These results indicate that the TAS is selectively reliable in the sections of resting posture and associated reaction.

• 대한치과의사협회지
• /
• 제52권8호
• /
• pp.456-463
• /
• 2014

Caries Management by Risk Assessment (CAMBRA), published by California Dental Association in 2003, is a customized caries care system that classifies individuals' caries risk into 4 risk groups based on objective evidences and provides chemical treatments targeted for each caries risk level. However, this system was not only developed but also optimized for situation in the United States, resulting into many limitations to be used in Korea, and thus Korean CAMBRA (K-CAMBRA) that considers the clinical situation in Korea needs to be developed. K-CAMBRA includes various techniques that are newly developed in order to overcome the limitations. First, Q-ray, a new optical technology, is utilized in order to avoid the subjectivity of visual inspection during assessment of disease indicators and risk factors. Moreover, Cariview? that reflects the paradigm shift in cariology as a new form of caries assessment kit is used. In addition, considering the situation in Korea, where it is impossible to use high concentration fluoride product, Oral pack with a customized tray is added to increase the contact time of chemical substance. CAMBRA is believed to be the key clinical tool that overcomes the limitations of the paradigm of the conventional restoration-based surgical model of dentistry. Furthermore, it can be expected that Korean dentists can act as oral physicians who are able to control and care individuals' caries risk rather than operative experts who only care about the outcome of caries.

• 에너지공학
• /
• 제8권4호
• /
• pp.612-620
• /
• 1999

환경영향평가는 전과정평가(Life Cycle Assessment : LCA)의 인벤토리 분석과정에서 규명된 환경부하의 값으로 표현하고 상대적인 중용도를 측정하는 단계이다. 이러한 가중치를 측정하므로서 개별제품 또는 기술에 대한 환경부하의 영향을 평가하는데 이용될 수 있다. 본 연구에서는 환경영향평가에 대한 분석에서 환경부하의 상대적인 중요도 혹은 가중치를 산출하기 위하여 일반적으로 이용되는 계층적 의사결정모형(Hierarchical decision model)의 한계인 요인들간의 독립성을 극복할 수 있는 즉, 의사결정요인간 상호영향력을 가지는 네트워크 구조(Network decision model)에서도 사용될 수 있는 의사 결정모형( Analytic Network Process : ANP)을 도입한다. ANP로부터 얻어지는 각 의사결정요인의 가중치는 환경부하의 수준을 결정하는데 용이하게 이용할 수 있다.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.16-21
• /
• 2024

The yaw gearbox is a key device in a wind power generator that improves power generation efficiency by rotating hundreds of tons (400 to 600 tons) of nacelle so that the blade reaches 90 degrees in the wind direction. Recently, installation sites have been advancing from land to sea as they have become super-large at (8-12) MW to increase the economic feasibility of wind power generators and utilize excellent wind resources, and the target life of large wind power generators is 25 to 30 years. The yaw gearbox of 6 to 12 sets is installed in a very complex place inside the nacelle on the tower with parallels, and it is important to secure the reliability of the yaw gearbox because if a failure occurs after installation, it costs tens to hundreds of times the price of a new product to restore. In this study, equivalent loads were calculated by analyzing failure mode and field data, accelerated life test conditions were established, and a test device was constructed to perform the accelerated life tests and performance tests to ensure the reliability of the gearbox.

• 환경영향평가
• /
• 제16권4호
• /
• pp.241-250
• /
• 2007

A study was carried out on the level of heavy metals, total coliform and benzo(a)pyrene that may be introduced through by-product fertilizers or air pollution to turfgrass in natural turfgrass playground in elementary schools around the western coast and eastern mountain areas in Jeollabuk-do, Korea. The level of heavy metals found in turfgrass was in the order of Cu > Zn > Pb > Cd. The majority of heavy metals was found in the roots. It is presumed that the absorption of some air pollutants and by-product fertilizers or chemical fertilizers. The level of benzo(a)pyrene showed an average of 0.05ng/g with a range between 0.02 to 0.08ng/g in the leaves. In the meantime, none was detected in the stems, while the average for roots was 0.02ng/g with a range between 0.01 and 0.03ng/g. The level detected is that found background level, however, benzo(a)pyrene can be introduced partly from the unstable combustion of fossil fuel or through vehicle emissions. Total coliform distributed in grass showed an average of 12MPN/100ml with a range between 2 and 36MPN/100ml. The density of total coliform displayed no regional predominance. However, in some urban areas, the density was slightly higher. The feces of pets or by-product fertilizers may have contributed to the input of pathogenic micro-organism. Yet the level was found to be negligible.

• 한국멀티미디어학회논문지
• /
• 제16권12호
• /
• pp.1376-1384
• /
• 2013

본 논문에서는 산업용 CT 볼륨데이터에서 템플릿 매칭을 통하여 제품의 이물질을 자동 검출하는 기법을 제안한다. 제안방법은 다음과 같은 세 단계로 이루어진다. 첫째, 다운 샘플링 데이터에서 잡음제거 후 제품을 배경과 분리하고, 영상의 평균값 및 표준편차를 이용하여 초기 이물질 후보를 추출한 후, K-평균 클러스터링을 이용하여 이물질 후보를 추출한다. 둘째, 템플릿 매칭을 이용하여 제품과 유사도가 다른 이물질을 검출한다. 이 때, 검출하고자 하는 이물질의 크기에 따라 밝기값평균차이(SSD)와 조인트 엔트로피를 이용한 유사도 평가를 통하여 이물질을 검출한다. 셋째, 원 볼륨데이터에서 이물질 검출률을 개선하기 위하여 여과기법으로 제품의 이물질을 최종 검출한다. 본 제안 방법의 결과를 평가하기 위해 산업용 CT 볼륨데이터와 시뮬레이션 데이터를 사용하여 육안평가, 정확성 평가와 수행시간 측정을 수행하였다. 정확성 평가를 위하여 기존 밝기값 기반 검출 기법을 비교방법으로 사용하고, 다이스 계수 유사도를 측정하였다.

• 한국환경보건학회지
• /
• 제45권5호
• /
• pp.405-425
• /
• 2019

Objective: This study aimed to review the methodologies for evaluation of consumer spray products containing engineered nanomaterials (ENM), particularly focusing on inhalation exposure. Method: Literature on the evaluation methods for aerosolized ENM exposure from consumer spray products were collected through academic web searching. Common methodologies used in the literature, including research reports and academic articles, were also introduced. Results: The number of ENM-containing products have shown a considerable increase over recent years, from 54 in 2005 to 1,827 in 2018. Currently there is still discussion over the existing regulations with regard to product safety. Analysis of both ENM suspensions in the products and their aerosols is important for risk assessment. Comparison between the phases suggests how the size and concentration of particles change during the spray process. To analyze the ENM suspensions, dynamic light scattering, electron microscopy techniques, and inductively coupled plasma with mass spectrometry were used. In the aerosol monitoring, direct-reading instruments have been used to monitor the aerosols and conventional active sampling is used together to supplement the lack of real-time monitoring. There are also some models for estimating inhalation exposure. These models may be used to estimate mass exposure to nanomaterials contained in consumer products. Conclusion: Although there is no standardized method to evaluate ENM exposure from consumer products, many concerns about ENM have emerged. Every potential measure to reduce exposure to ENM from spray product use should be implemented through a precautionary recognition.