• 감성과학
• /
• 제7권2호
• /
• pp.149-155
• /
• 2004

패션소재로서의 유용성을 결정하는 속성을 두께, 무게, 밀도, 광택, 색상 등으로 한정한 후 다속성 모델을 구축하였다. 각 속성들의 가중치는 의류 매장의 방문객 대상의 설문 조사에 의해 결정되었으며, 한 소재의 최종가치는 퍼지 추론 시스템에 의해 계산되었다. 구축된 "퍼지-다속성" 모델을 이용하여 패션소재의 총 가치를 i) 품질로부터의 가치, ii) 품질을 기반으로 부가되는 가치, iii) 품질과는 무관하게 형성되는 브랜드 가치의 세 가지 요소를 분해하였다. 시중의 유명 스포츠 의류 브랜드 2종을 선정하여 위의 모델을 적용하였다.모델을 적용하였다.

• 대한환경공학회지
• /
• 제29권4호
• /
• pp.388-394
• /
• 2007

• Computers and Concrete
• /
• 제14권4호
• /
• pp.387-403
• /
• 2014

The aim of this study is to assess the structural performance of deteriorated reinforced concrete bridge piers, and to provide method for developing improved evaluation method. For a deteriorated bridge piers, once the cover spalls off and bond between the reinforcement and concrete has been lost, compressed reinforcements are likely to buckle. By using a sophisticated nonlinear finite element analysis program, the accuracy and objectivity of the assessment process can be enhanced. A computer program, RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), is used to analyze reinforced concrete structures. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. Advanced deteriorated material models are developed to predict behaviors of deteriorated reinforced concrete. The proposed numerical method for the structural performance assessment of deteriorated reinforced concrete bridge piers is verified by comparing it with reliable experimental results. Additionally, the studies and discussions presented in this investigation provide an insight into the key behavioral aspects of deteriorated reinforced concrete bridge piers.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.628-630
• /
• 2003

Synthetic Aperture Radar(SAR) is an active microwave instrument that performs high-resolution observation under almost all weather condition. Research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. In fact, many complicated steps are involved in order to generate a SAR image product. The purpose of this paper is to derive quality assessment procedures and define important test parameters in each procedure inside a SAR processor. Thus those test parameter values indicate the quality of SAR image products and verify the processor's performance. Moreover, required procedures to correct and handle errors which are indicated during the assessment are also presented.

• 한국환경과학회지
• /
• 제23권8호
• /
• pp.1395-1407
• /
• 2014

Coal seam gas (CSG) production involves extracting methane from coal seams with ground water which is so called a primary by-product of this process, and is often rich in salts and other constituents. The predicted large volume and variable quality of this water make water management a topic associated with CSG production. In the past, the amount of this water used to be pumped into the vacant aquifer, or into the river during the life of individual production wells. Australian government make a strategies for management and beneficial use of the water. From this point of view, a detailed assessment has not been undertaken, it is necessary for water resource production to analysis the "Coal Seam Gas Water (CSG Water) Management Policy Study" published in Queensland, Australia.

• 한국한의학연구원논문집
• /
• 제2권1호
• /
• pp.129-145
• /
• 1996

According to the Medical Product Safety Administration Guidelines for safety assessment guinea pigs, mice and rats were used for antigenicity test, rabbits for pyrogenic test and hymolytic test. The results were summarized as follows; 1. The antigenicity test of Red-ginseng radix extract solution for herb-acupuncture did not show any anaphylatic shock but produced IgE in high dose group. 2. The result of the pyrogen test of Red-ginseng radix extract solution for herb-acupuncture was negative. 3. The result of the hemolytic test of Red-ginseng radix extract solution for herb-acupuncture were negative in low and middle dose group but was positive in high dose group.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.191-197
• /
• 2011

Lifting chair is a typical assistive product to aid for standing up and sitting down for persons with disability. It is particularly useful for the elderly persons whose muscular system is weakened by degenerative joint disease. This paper describes biomechanical assessments of lifting chair with hip-up function. In experiments we measured 3D motion and electromyographic(EMG) signal on the femoral muscle when subject performs the standing motion on the predetermined seat height. Based on assessment of the standing motion, we select the hip-up angle as 15 degrees to cover the relative femoral angle when EMG peak value is appeared. Using an implemented prototype lifting chair with hip-up function we perform standing experiments with five subjects. The experimental results show that the lifting and hip-up functions are effective to assist for standing up motion with less muscle force.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.365-379
• /
• 1997

Currently the problem of air pollution caused by the motor vehicle emission is of the most serious problems to be solved. Life Cycle Assessment is a process to evaluate the environmental burdens associated with a product or process by identifying and quantifying energy and materials used and wasters to the environment. This paper establishes a Life Cycle Assessment Systems which satisfies the criteria motor vehicle emission for the automobile producers who are currently producing the automobiles with catalytic convert. This plan also considered the constraint of the effective motor vehicle emission by way of the exhaust gas recirculation, electronic fuel injection, closed loop carburetor. In order to develope the performance of the LCA systems, the recent emissions test data have also been applied. The result of the development LCA systems has proved that the LCA plans presented in this paper satisfies the criteria motor vehicle emission and will be contributed to constrain the motor vehicle emission most effectively.

• 대한치과의사협회지
• /
• 제52권8호
• /
• pp.464-471
• /
• 2014

This article reviewed theological background and historicak development in dental caries management by risk assessment. Dental caries prevention and treatment according to CAMBRA model is patient-centered, risk-based, evidence-based practice. Team approach is necessary and clinician need to integrate science, practice and product. Dental hygienist take a important role in implementing CAMBRA. CAMBRA model could be incorporated into dental and dental hygiene education. Dentist and dental hygienist able to provide scientific and ethical care managing dental caries by risk assessment.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.23-29
• /
• 2018

The objective of this paper is to evaluate the reliability of a volute pump and presents test results through performance and life tests. The performance and life test methods were presented by analyzing the failure modes of the volute pump. Zero failure test time was calculated to evaluate the reliability of the volute pump and then, the test was performed under accelerated conditions. The test was also carried out to check the failure modes of the field conditions. This study can be provided to improve the product reliability through failure analysis of the volute pump. And failure cause of typical failure case has been investigated and improvement design has been presented. The performance test results of before and after the accelerated life test were presented to confirm the improved reliability of the volute pump.