• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.74-79
• /
• 1998

The use of a fiber Fabry-Perot interferometer (FFPI) as an optical current transducer is demonstrated. A conventional inductive pickup coil converts the time-varying current I(t) being measured to a voltage waveform V(t) applied across a piezeolectric strip to which the FFPI is bonded. The strip experiences a longitudinal expansion and contraction, resulting in an optical phase shift ${\phi}(t)$ in the fiber proportional to V(t). This phase shift is measured using a frequency-modulated semiconductor light source, photodiodes to monitor the reflected light from the FFPI and the laser power, and a digital signal processor. Calibration routines compute V(t) and I(t) from the measured phase shift at a l KHz rate. Response to 60 Hz ac over the design range 0-1300A rms is characterized Transient response of the FFPI transducer is also measured.

• 전자공학회논문지B
• /
• 제30B권9호
• /
• pp.122-132
• /
• 1993

In this paper, a self tuning control algorithm is proposed for the high performance drive of DC servo motor, which is adequate to the servo system having frequent load variation. In order to realization of the algorithm, the control system is developed using a fixed point high speed digital signal processor. TMS320C25. Control algorithm is composed of two parts. One is estimation law part using recursive least mean square method, the other is control law part using minimum variance control method. For the purpose of easiness of applying adaptive algorithm, developed control system is based o PC-DSP structure which can develop, debug programs and monitor the dynamic behaviors,etc. Through computer simulation and experimental results, it was verified that proposed control system could estimate system parameters and was robust to the variation of the load and as a result, was adequate to the servo motor drives.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권3호
• /
• pp.124-132
• /
• 2003

The goal of this paper is to propose a virtual instrumentation system based on three dimensional current coordinates for monitoring power quality A developed system with various experimental graphic screens and numerical results is made up 586-PC and DSP(digital signal processor) board, power quality analyzing and evaluating software for windows. Power parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis. results are visualized by 3-D current coordinates, and it Is compared and evaluated with conventional time / frequency domain. To verify the validity of the proposed system, power and harmonic parameters of single phase induction motor drives is analyzed and verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2380-2382
• /
• 2004

In this paper, Web server is built up using PXA255, 32bit RISC processor with porting Embedded Linux and GoAhead, HTTP(Hyper Text Transfer Protocol) web server, and the system with can monitor and control the environment and condition for AICC(Automatic Intelligent Cruise Control) is realized. For sending the operation condition and change of vehicle the desired data is derived by interacting ECU(Electric Control Unit) and Embedded system and the rpm of engine is controlled by step motor connected to throttle value.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1087-1088
• /
• 2008

In this paper, an error prediction system for the distribution feeders is designed and implemented. In order to monitor the signals of voltages, currents, temperatures, and sounds, and then analyze the signals, an ARM9-based processor board is used and numerous programmable gain amplifiers, temperature sensors, filters are implemented based on a low single voltage system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.822-825
• /
• 1988

In this paper, we present a system which enables a real-time measurement of the number and also the body length of the fry (baby fish) using a line image sensor. Here, we consider a situation that fry are transported from a pond to another, pond through a pipe. At one position of the pipe a transparent rectanglar channel is mounted. The images of the fry, which run through this rectanglar channel, are detected by a line image sensor. The image signals are digitized to binary ones and the contour of the fry are detected. After that, a real-time image analysis is executed with a digital signal processor. Labeling program analyses the connection of every pixel. The results are transfered to a personal computer and displayed on the online monitor graphically.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.119-124
• /
• 1999

This paper presents new approach to technology pattern recognition of camera back cover and test of soldering. In real-time implementing of pattern recognition camera back cover and test of soldering, the MVB-03 vision board has been used. Image can be captured from standard CCD monochrome camera in resolutions up to 640$\times$480 pixels. Various options re available for color cameras, a synchronous camera reset, and linescan cameras. Image processing os performed using Texas Instruments TMS320C31 digital signal processors. Image display is via a standard composite video monitor and supports non-destructive color overlay. System processing is possible using c30 machine code. Application software can be written in Borland C++ or Visual C++

• 대한의용생체공학회:의공학회지
• /
• 제8권2호
• /
• pp.117-117
• /
• 1987

The medical image processing system is intended for a diverse set of users in the medical Imaging Parts. This system consists of a 640 Kbyte IBM-PC/AT with 30 Mbyte hard disk, special purpose image processor with video input devices and display monitor. Image may be recorded and processed in real time at sampling rate up to 10 MHz. This system provides a wide range of image enhancement processing facilities via a menu-driven software packages. These facilities include point by point processing, image averaging, convolution filter and subtraction.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.107-113
• /
• 2005

본 연구에서는 임베디드 리눅스와 HTTP(Hypertext Transfer Protocol) 웹 서버인 GoAhead를 포팅한 32비트 RISC프로세서인 PXA255를 이용하여 웹 서버를 구축하고, 웹 서버를 기반으로 자동차의 순항제어나 무인 운전을 위한 일련의 환경과 상황을 모니터링하고 제어할 수 있는 시스템을 구현하였다. 자동차의 동작 상태와 변화를 감지하기 위해서 ECU와 임베디드 시스템을 인터페이스 시켜 필요한 데이터를 추출하고, 스로를 밸브에 스텝모터를 연결하여 자동차의 엔진을 회전시켜 자동차의 무인 이동을 제어한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.2023-2026
• /
• 2002

This paper explains the study of controller design applied to SRM(Switched Reluctance Motor) concept. This controller executes controller algorithms via ${\mu}$-processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal. During initial period, SRM controller was designed to control .respective target RPM (Revolution per minutes) and PR (Proportional Integral Differential) coming from the PC(Personal Computer) monitor program, and receiving clockwise and counter-clockwise rotation signal and target RPM coming from the front panel, and receiving the location of rotational element and RPM generating from the position censor during activation period.