• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.812-819
• /
• 2012

Interference and jamming are becoming increasing concern to a radar system nowdays. AESA(Active Electronically Steered Array) antennas and adaptive beamforming(ABF), in which antenna beam patterns can be modified to reject the interference, offer a potential solution to overcome the problems encountered. In this paper, we've developed a planar active phased array radar system, in which ABF, target detection and tracking algorithm operate in real-time. For the high output power and the low noise figure of the antenna, we've designed the S-band TRMs based on GaN HEMT. For real-time processing, we've used wavelenth division multiplexing technique on fiber optic communication which enables rapid data communication between the antenna and the signal processor. Also, we've implemented the HW and SW architecture of Real-time Signal Processor(RSP) for adaptive beamforming that uses SMI(Sample Matrix Inversion) technique based on MVDR(Minimum Variance Distortionless Response). The performance of this radar system has been verified by near-field and far-field tests.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.7
• /
• pp.28-37
• /
• 1997

In this paper, we designed a motion estimator for MPEG-2 video coder using VHDL. Motion estimation is indispensable for encoding MPEG 2 video. Motion estimation takes over 50% computation power of video encoding 37 frames per second and is suitable for real-time processing. The number of data accesses for computation is fewer than 2 times compared with that of old one. This makes slower memory module available. We minimize input pins to migrate input data through PEs. This processor can compute various motio estimation modes at one calculation that is supported by MPEG-2 video standard. Also independent control architecture makes this processor a single processor or a sub module in amultimedia chip.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1040-1048
• /
• 1987

We propose a hardware architecture called Multiring which is applicable for various geometrical operations on rectilinear objects such as design rule checking in VLSI layout and many image processing operations including noise suppression and coutour extraction. It has both a fast execution speed and extremely high flexibility. The whole architecture is mainly divided into four parts` I/O between host and Multiring, ring memory, linear processor array and instruction decoder. Data transmission between host and Multiring is bit serial thereby reducing the bandwidth requirement for teh channel and the number of external pins, while each row data in the bit map stored in ring memory is processed in the corresponding processor in full parallelism. Each processor is simultaneously configured by the instruction decoder/controller to perform one of the 16 basic instructions such as Boolean (AND, OR, NOT, and Copy), geometrical(Expand and Shrink), and I/O operations each ring cycle, which gives Multiring maximal flexibility in terms of design rule change or the instruction set enhancement. Correct functional behavior of Multiring was confirmed by successfully running a software simulator having one-to-one structural correspondence to the Multiring hardware.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.117-123
• /
• 2012

This paper implements mobile Worldwide Interoperability for Microwave Access (WiMAX) receiver using Software Defined Radio (SDR) technology. SDR system is difficult to implement on the mobile handset because of restrictions that are computing power and under space constraints. The implemented receiver processes mobile WiMAX software modem on Open Multimedia Application Platform (OMAP) System on Chip (SoC) and Field Programmable Gate Array (FPGA). OMAP SoC is composed of ARM processor and Digital Signal Processor (DSP). ARM processor supports Single Instruction Multiple Data (SIMD) instruction which could operate on a vector of data with a single instruction and DSP is powerful image and video accelerators. For this reason, we suggest the possibility of SDR technology in the mobile handset. In order to verify the performance of the mobile WiMAX receiver, we measure the software modem runtime respectively. The experimental results show that the proposed receiver is able to do real-time signal processing.

• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.85-92
• /
• 2011

This paper shows an effective partitioning of static global row/column buses for tightly coupled 2D mesh-connected small processor arrays ("mesh", for short). With additional O(n/m (n/m + log m)) time slowdown, it enables the mesh of size $m{\times}m$ with static row/column buses to simulate the mesh of the larger size $n{\times}n$ with reconfigurable row/column buses ($m{\leq}n$). This means that if a problem can be solved in O(T) time by the mesh of size $n{\times}n$ with reconfigurable buses, then the same problem can be solved in O(Tn/m (n/m + log m)) time on the mesh of a smaller size $m{\times}m$ without a reconfigurable function. This time-cost is optimal when the relation $n{\geq}m$ log m holds (e.g., m = $n^{1-\varepsilon}$ for $\varepsilon$ > 0).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.340-344
• /
• 1986

This paper shows that we can design a vector-coordinate rotation processor and obtain the approximate evaluations of sine and cosine based upon the use of residue number systems. The algorithm results in the considerable improvement of the computation speed when compared to CORDIC algorithm. The results from computer simulation show that the mean error of sine and cosine is 0.0025 and the mean error of coordinate rotation arithmatic is 0.65. Also, the proposed processor has the efficiency for the design and fabrication of integrated circuit, because it consists of the array of idecntially structured look-up tables.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.10
• /
• pp.2043-2052
• /
• 1994

This paper proposes a new parallel ASIC architecture for real-time image processing to reduce inter-processing element (inter-PE) communication overhead, called a Sliding Memory Plane (SliM) Image Processor. The Slim Image Processor consists of $3\times3$ processing elements (PEs) connected by a mesh topology. With easy scalability due to the topology. a set of SliM Image Processors can form a mesh-connected SIMD parallel architecture. called the SliM Array Processor. The idea of sliding means that all pixels are slided into all neighboring PEs without interrupting PEs and without a coprocessor or a DMA controller. Since the inter-PE communication and computation occur simultaneously. the inter-PE communication overhead, significant disadvantage of existing machines greatly diminishes. Two I/O planes provide a buffering capability and reduce the date I/O overhead. In addition, using the by-passing path provides eight-way connectivity even with four links. with these salient features. SliM shows a significant performance improvement. This paper presents architectures of a PE and the SliM Image Processor, and describes the design of an instruction set.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1655-1666
• /
• 2015

This paper proposes a new approach of Field Programmable Gate Array (FPGA) controlled digital implementation of shunt active power filter (SAPF) under steady state and dynamic operations. Typical implementations of SAPF uses microprocessor and digital signal processor (DSP) but it limited for complex algorithm structure, absence of feedback loop delays and their cost can be exceed the benefit they bring. In this paper, the hardware resources of an FPGA are configured and implemented in order to overcome conventional microcontroller or digital signal processor implementations. This proposed FPGA digital implementation scheme has very less execution time and boosts the overall performance of the system. The FPGA controller integrates the entire control algorithm of an SAPF, including synchronous reference frame transformation, phase locked loop, low pass filter and inverter current controller etc. All these required algorithms are implemented with a single all-on chip FPGA module which provides freedom to reconfigure for any other applications. The entire algorithm is coded, processed and simulated using Xilinx 12.1 ISE suite to estimate the advantages of the proposed system. The coded algorithm is also defused on a single all-on-chip Xilinx Spartan 3A DSP-XC3SD1800 laboratory prototype and experimental results thus obtained match with simulated counterparts under the dynamic state and steady state operating conditions.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.475-484
• /
• 2000

Recently, processor arrays to enhance the banRecently, processor arrays to enhance the bandwidth of buses and to reduce the complexity of hardwares, using optical buses instead of electronic buses, have been proposed in manyliteratures. In this paper, we first propose a constant-time algorithm for parentheses matching problemon a linear array with slotted optical buses (LASOB).Then, given an algebraic expression of length n, we also propose a cost optimal parallel algorithmthat constructs computational tree form in the steps of constant time on LASOB with n processorsby using parentheses matching algorithm. A cost optimal parallel algorithm for this problem that runsin constant time has not yet been known on any parallel computation models.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.606-613
• /
• 2002

In this paper we applied a transmit beamforming technique to the underwater acoustic communication system for high rate data transmission. A prototype transmit system was designed and implemented with the general purpose DSP processor and multiple digital-to-analog converters. The performances of the implemented system were evaluated by the experiment in water tank. In order to simplify the procedure the channel coding and equalizer were omitted. And the simplest OOK (On-Off Keying) technique in digital communication methods was applied. The experimental result shows that the transmission data rate is higher about 3 times in the case of 5 hydrophone transmitting may than 1 hydrophone transmitter at bit error rate 10/sup -2/. We verified that the maximum data rate was 400 bps for speech signal transmission in water tank.