• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.56-62
• /
• 2012

This paper presents design and implementation of the speed controller for DC motor system using Embeded Target for TI C2000 DSP library in Matlab/Simulink is introduced. Speed controller are easily design and implemented by using the Matlab/Simulink program. Feedback of motor speed is processed through eZdsp F2812 AID converter using encoder and pulse meter as speed sensor. Real-time program of controller is drawn using Simulink and converted program code for speed control of P control, PID control and parameter estimation base adaptive control is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of speed response for implemented controllers. And even if controlled plant becomes alteration studied controller design and implementation easily method.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.114-121
• /
• 2017

In order to overcome the limitations of the mobile speed system for 1 lane, this study is used a multi-laser beam to develop a mobile speed measuring system, using a multi-phase beam. By using multi-laser beam, least squares algorithms and speed error processing algorithms were developed to improve speed accordancy and speed error rates compared to conventional mobile speed meters using a single laser beam. A field test showed that 80.0 percent of 3 lane and 87.0 percent of 4 lane were appropriate for the mobile speed system. With the development of the mobile speed measuring system, it is expected to dramatically reduce the accidents caused by the speed of traffic. It is also expected to effectively operate equipment and manage the cost by improving manpower and providing improved enforcement accuracy, by contributing positively to public institution and public affairs.

• The Journal of the Korea Contents Association
• /
• v.2 no.1
• /
• pp.86-97
• /
• 2002

In this thesis, we propose a high-speed information network management mode based on layering and partitioning concepts of ITU-T G.805 We describe an information mood of the configuration of VP and VC networks and an information mode to manage faults in high-speed information networks. In order to efficient manage faults, us distinguish between an alarm with a fault that has negative effects on services and an alarm with an alert that barely affects services. Thus, we propose two types of computational models to treat all of these alarms, a fault alarm processing system and an alert alarm processing system. We also describe procedures of alarm processing and we describe the scope and processing course of NMS and SubNMS when rerouting a fault VP and VC fault connection. Lastly, we describe the implementation and analysis of the performance of the proposed fault alarm processing system. We compare the alarm processing tire of each priority according to the alarm occurrence ratio.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.231-236
• /
• 2014

In this paper, we propose a processing speed improvement by adding a parallel processing based on device(graphic card) into a road region extraction by host(PC) based serial processing. The OpenCV CUDA supports the many functions of parallel processing method by interworking a conventional OpenCV with CUDA. Also, when interworking the OpenCV and CUDA, OpenCV functions completed a configuration are optimized the User's device(Graphic Card) specifications. Thus, OpenCV CUDA usage provides an algorithm verification and easiness of simulation result deduction. The proposed method is verified that the proposed method has a about 3.09 times faster processing speed than a conventional method by using OpenCV CUDA and graphic card of NVIDIA GeForce GTX 560 Ti model through experimentation.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.685-694
• /
• 2016

This paper presents a reliability assessment model for the power semiconductors used in wind turbine power converters. In this study, the thermal loadings at different timescales of wind speed are considered. First, in order to address the influence of long-term thermal cycling caused by variations in wind speed, the power converter operation state is partitioned into different phases in terms of average wind speed and wind turbulence. Therefore, the contributions can be considered separately. Then, in regards to the reliability assessment caused by short-term thermal cycling, the wind profile is converted to a wind speed distribution, and the contribution of different wind speeds to the final failure rate is accumulated. Finally, the reliability of an actual power converter semiconductor for a 2.5 MW wind turbine is assessed, and the failure rates induced by different timescale thermal behavior patterns are compared. The effects of various parameters such as cut-in, rated, cut-out wind speed on the failure rate of power devices are also analyzed based on the proposed model.

• Journal of Internet of Things and Convergence
• /
• v.8 no.4
• /
• pp.9-15
• /
• 2022

NAND flash memory is used as a medium for various storage devices due to its high data processing speed with low power consumption. However, since the read processing speed of data is about 10 times faster than the write processing speed, various studies are being conducted to improve the speed difference. In particular, flash dedicated buffer management policies have been studied to improve write speed. However, SSD(solid state disks), which has recently been used for various purposes, is more vulnerable to read performance than write performance. In this paper, we find out why read performance is slower than write performance in SSD composed of NAND flash memory and study buffer management policies to improve it. The buffer management policy proposed in this paper proposes a method of improving the speed of a flash-based storage device by analyzing the pattern of read data and applying a policy of pre-reading data to be requested in the future from NAND flash memory. It also proves the effectiveness of the read-ahead policy through simulation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.17-25
• /
• 1994

We analyze risks andd present the requirements of digital multisignature in electronic contract systems where several persons contract a digital document electronically. We also apply a few digital multisignature schemes that have been developed so far, to the electronic contract system and propose a new digital multisignature scheme based on the Fiat-Shamir scheme. We investigate how these schemes satisfy with the requirements and evaluate their efficiency in terms of processing speed. communication complexity, and message length Owing to the high processing speed and the high degree of satisfaction to the requirements, the proposed scheme is suitable for electronic contract systems.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.340-345
• /
• 2001

In this paper, We have studied on the critical vibration limits of spindle unit for the high speed ball pen tip processing machine. The vibration of bearing can be measured by FFT, and the influence of vibration amplitude due to the Unbalance, bearing deflect, bite and timing belts tension are analyzed. So, the critical vibration limits of spindle is determined by the X, Z directional vibration of spindle Unit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.480-483
• /
• 1997

A fossil power plant can be modeled by a lot of algebraic equations and differential equations. When we simulate a large, complicated fossil power plant by a computer such as workstation or PC, it takes much time until overall equations are completely calculated. Therefore, new processing systems which have high computing speed is ultimately needed to develope real-time simulators. Vital points of real-time simulators are accuracy, computing speed, and deadline observing. In this paper, we present a enhanced strategy in which we can provide powerful computing power by parallel processing of DSP processors with communication links. We designed general purpose DSP modules, and a VME interface module. Because the DSP module is designed for general purpose, we can easily expand the parallel system by just connecting new DSP modules to the system. Additionally we propose methods about downloading programs, initial data to each DSP module via VME bus, DPRAM and processing sequences about computing and updating values between DSP modules and CPU30 board when the simulator is working.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.3
• /
• pp.437-445
• /
• 2008

This paper deals with the experimental assessment of the vibration suppression of the smart structures. First. we have presented a new high-speed active control system using the DSP320C6713 microprocessor. A peripheral system developed is composed of a data acquisition system, N/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers for fast data processing. Next, we have tested the processing time of the peripheral devices, and provided the corresponding test results. Since fast data processing is very important in the active vibration control of the structures, we have focused on achieving the fast loop times of the control system. Finally, numerous experiments were carried out on the aluminum plate to validate the superior performance of the vibration control system at different control loop times.