• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.242-243
• /
• 2009

Friction stir welding and friction stir processing is a new solid state processing technique for ioining and micro..structural modification in metallic materials. It has been applied not only joining for light metals but also modification of the microstructure to enhance mechanical properties. In thin study, we investigated the mechanical properties for applied friction stir welding and processing under various parameters such as probe diameter, probe type, traveling speed and rotating speed for 5456-H116 AI allov. As a result of experiments, optimum condition of friction stir welding is traveling speed of 15mm/min, rotating speed of 500RPM at 6mm diameter probe. Moreover, in the case of friction stir processing, the optimum condition is traveling speed of 15mm/min, rotating speed of 250RPM at full screw probe. As above mentioned, the mechanical characteristics enhanced with the decreasing of traveling speed and the increasing of friction areas because of plastic flow due to high friction heat. These result can be used as reference data for ship repairment.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.537-539
• /
• 2007

Telemetry processing system requires minimum bit transition level in data streams to maintain a bit synchronization while receiving telemetry signal. PN code has a capability of providing the bit transition and is widely used in the packet communication of CCSDS. CCSDS PN code that generator polynomial is $h(x)=x^{8}+x^{7}+x^{5}+x^{3}+1$, and the random bit sequence that is generated from this polynomial is repeated with the cycle of 255 bits. As the resolution of satellite image increases, the size and transmission rate of data increases. To process of huge and bulky size of satellite image, the speed of CCSDS PN Processing is very important. This paper introduces the way of improving the CCSDS PN Processing speed through processing 128 bits at one time using the feature of cyclic structure that repeats after first 255 bytes by grouping the random bit sequence with 1 byte and Intel Streaming SIMD Extensions 2. And this paper includes the comparison data of processing speed between SSE2-applied implementation and not-applied implementation, in addition, the measured value of speed improvement.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.96.6-96
• /
• 2002

In this study an image processing system is designed and developed, which can detect and assort some defects on the surface of an object moving with high speed. For real time surface detection of high speed moving object, the fast processing should be managed and the image information including some surface features should be captured. It is difficult to acquire the noise free image due to various light sources and high speed moving materials under the environment of the general industrial site. In general, because pre-processing methods are employed for getting a noise free feature, the image processing speed has some limitation and the expensive image processing devices are required. This...

• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.195-204
• /
• 2006

This paper deals with a batch processor model in which the batch processing speed depends on the jobs assigned to the batch. Each job is completed by accomplishing its required job processing quantity which is calculated as job speed product processing time. Its speed is given as not the exact value but the range. Thus the batch sets are constructed by the jobs which hold the speed in common. And the batch sets are processed as soon as possible. We developed the model to described the problem situation and adopt the total tardiness as the decision criterion.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.155-161
• /
• 2021

Recently, researches for military purposes such as precision tracking and mission completion using UAVs have been actively conducted. In particular, if the posture information of the leading UAV is estimated and the mission UAV uses this information to follow in stealth and complete its mission, the speed of the posture information estimation of the guide UAV must be processed in real time. Until recently, research has been conducted to accurately estimate the posture information of the leading UAV using image processing and Kalman filters, but there has been a problem in processing speed due to the sequential processing of the processing process. Therefore, in this study we propose a way to improve processing speed by applying methods that the image processing area is limited to the ROI area including the object, not the entire area, and the continuous processing is distributed to OpenMP-based multi-threads and processed in parallel with thread synchronization to estimate attitude information. Based on the experimental results, it was confirmed that real-time processing is possible by improving the processing speed by more than 45% compared to the basic processing, and thus the possibility of completing the mission can be increased by improving the tracking and estimating speed of the mission UAV.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.149-151
• /
• 2002

We had been developing the variety of parallel processing systems in order to improve the processing speed of visual media applications. These systems were using multi-access memory system(MAMS) as a parallel memory system, which provides the capability of the simultaneous accesses of image points in a line-segment with an arbitrary degree, which is required in many low-level image processing operations such as edge or line detection in a particular direction, and so on. But, the performance of these systems did not give a faithful speed because of asynchronous feature between MAMS and processing elements. To improve the processing speed of these systems, we have been investigated a pipelined parallel processing system using MAMS. Although the system is considered as being the single instruction multiple data(SIMD) type like the early developed systems, the performance of the system yielded about 2.5 times faster speed.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.162-167
• /
• 1994

The binary image normalization method in image processing can be used in several fields, Especially, its high speed processing method and its hardware implmentation is more useful, A normalization process of each character in character recognition requires a lot of processing time. Therefore, the research was done as a part of high speed process of OCR (optical character reader) implementation as a pipeline structure with host computer in hardware to give temporal parallism. For normalization process, general purpose CPU,MC68000, was used to implement it. As a result of experiment, the normalization speed of the hardware is sufficient to implement high speed OCR which the recognition speed is over 140 characters per second.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.3
• /
• pp.32-38
• /
• 2004

Recently, the system of high speed milling(HSM) is widely used for reducing the operation time and maximizing efficiency of work. The most research of high speed milling system is still leaves much to be desired. Specially the research of mass pocket high speed processing with high precision is the first and probably the last. So this paper showed mass pocket processing of high precision with a duralumin and then confirmed a cause of inferior goods through the CAD/CAM pattern simulation and experimentation. And this paper showed high speed processing system reduce the rate of inferior from this optimal pattern.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.194-197
• /
• 1998

Image Processing은 Image Data가 대량이고 내재된 정보가 병렬로 연관성을 가진다는 측면에서 실시간 처리가 용이하지 알다. 본 연구에서는 High Speed Real Time Image Processing을 위한 IPU(Image Processing Unit)와 이를 구동하기 위한 High Speed Real Time image Processing Language인 IPASM(Image Processing Assembly)을 제안한다. 우선 IPU의 기본개념을 설명하고 IPU의 구현을 위한 IPLU(Image Processing Logic Unit)를 설계한다. 그 후 Window98환경에서 구동 가능한 IPASM Interpreter를 실제로 제작하여 IPU의 동작방식을 간접적으로 진단한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.13-19
• /
• 2011

In this paper, the active monitoring and control system is developed. This system can monitor the status of high the speed spindle in real time during its processing, and can analyze its influence of dimensional accuracy and processing if any, and can control the machining condition to realize the machining system equipped with active monitoring and self-diagnostic features. Machining experiment was performed on 3 materials Al, Brass and S45C in order to derive the relation between active monitoring and control algorithm by the machining load. In addition, we measured surface roughness of processing specimen along with the data change of spindle rotating speed and conveying speed according to variation of machining load. Based on these experiments, we derived relations for each material that can be applied to the control algorithm to allow self control of the rotating speed and conveying speed according to the machining load.