• 지질공학
• /
• 제1권1호
• /
• pp.85-108
• /
• 1991

해양 탄성파탐사 자료처리는 자료의 양이 많고, 처리과정이 여러 개의 전문적인 단계로 이루어져 있으며, 각 단계별로 많은 처리변수를 결정해야 하는 특성이 있다. 따라서 전체 자료를 대표할 만한 표본 자료를 대상으로 주요 처리변수를 결정하게 되고, 그 결과를 전체 자료에 적용시키는 것이 일반적이다. 본 연구에서는 국내 대륙붕 지역에 적합한 처리단계 및 단계별 최적 처리변수들을 결정하기 위하여 실제자료를 대상으로 시험처리를 실시하였다. 이 시험처리에서 구한 처리순서 및 처리변수들을 사용하여 양호한 탄성파 구조보정단면도를 작성하였다.

• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.228-234
• /
• 2001

A methodology is developed and used to evaluate the response sensitivity of the thermal systems to variations in their design parameters. Technique for computing the sensitivity of temperature distributions to changes in processing parameters needed to decide the more effective laser input parameters for laser surface hardening treatment is considered. In this study, a state equation governing the heat flow in laser surface treatment is analyzed using a three-dimensional finite element method and sensitivity data of the processing parameter obtained using a direct differentiation method is applied to the sensitivity analysis. The interesting processing parameters are taken as the laser scan velocity and laser beam radius ( $r_{ b}$), and the sensitivities of the temperature T versus v and $r_{b}$ are analyzed. These sensitivity results are obtained with another parameters fixed. To verify the numerical analysis results, hardened layer dimensions (width and depth) of the numerical analysis are compared with the experimental ones.nes.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.260-263
• /
• 2000

A methodology is developed and many used to evaluate the response sensitivity of the thermal systems to variations in their design parameters. Technique for computing the sensitivity of temperature distributions to changes in processing parameters needed for deciding the more effective laser input parameters for laser surface hardening treatment are considered. In this study, a state equation governing the heat flow in laser surface treatment is analyzed using a three-dimensional finite element method and sensitivity data of the processing parameter obtained using a direct differentiation method applied for sensitivity analysis. The interesting processing parameter is taken as the laser scan velocity and characteristic beam radius( $r_{b}$) of the sensitivity of the temperature T versus v and $r_{b}$ is analyzed. And these sensitivity results obtained in another parameters are fixed condition. To verifying the numerical analysis results, hardened layer dimensions (width and depth) of the numerical analysis compared with the results of an experimental data.ata.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.344-353
• /
• 2000

Recent mechatronics technology is the most appropriate high technology in the agricultural application to save repetitious labor. Cow's body parameters were measured by traditional several measurer. Image processing technology was used to measure automatically their parameters to reduce lots of labor and time. The parameters were measured form a small model cow, which is easily measured, instead to a real cow. The image processing system designed and built for this project was composed of a Pentium PC, and TV frame card two cameras which were located on side and top of model cow. 11 parameters of cow's body were measured and the error between real data and the data by image processing was less than 10%. Based on the results of this research the parameters of a real cow could be measured in the future.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.122-129
• /
• 2012

Purpose: Recent mechatronics technology is the most appropriate high technology in agricultural applications to save repetitious labor. Method: Cow's body parameters were measured by several traditional measurers. Image processing technology was used to measure automatically their parameters to reduce labor and time. The parameters were measured form a small model cow which is easily measured, instead to a real cow. The image processing system designed and built for this project was composed of a PC, grabber card, and two cameras, which are located on the side and the top of the model cow. Tests of verification had measured 10 dairy cows. Result: Nine parameters of the model cow's body were measured, and the difference between the real data and the data by image processing was less than 16.7%. Based on the results of the research, the parameters of a real cow had measured of chest depth, withers height, Pelvic arch height, body length, slope body length, chest width, hip width, thurl width, and pin bone width were compared with image processing data. Conclusions: In the Demonstration test, Result had obtained similar data of cow model experiments, and the most of errors were shown less than 5% relatively good result.

• 한국지반신소재학회논문집
• /
• 제6권1호
• /
• pp.39-43
• /
• 2007

열융착법을 이용하여 보강과 배수기능을 가진 니들펀치 및 스펀본딩 부직포의 지오컴포지트를 제조하였다. 이 다층 부직포의 물성(인장, 인열 및 파영강도, 투수도 등)은 열융착법을 사용하여 제조될 경우 온도, 압력, 접착시간 등의 공정인자에 좌우된다. 따라서, 열융착법으로 제조된 지오컴포지트의 공정인자와 물성의 최적화는 매우 중요하다. 본 연구에서는 인공신경망(ANN)을 사용하여 지오컴포지트의 제조공정 최적화를 위한 알고리즘이 개발되었다. 지오컴포지트의 공정인자를 변화시켜 부직포 성능변화를 예측하기 위한 신경망 모사가 적용되었으며, 분석결과에 대한 제조방법의 효과를 조사하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.208-211
• /
• 2000

Processing parameters of filament winding were investigated by using design of experiment. To understand 4 main effects(fiber tension, impregnation pressure, processing rate, and temperature) and 3 interactions, $L_{27}(3^{13})$ orthogonal array table was adopted. The used materials were carbon fiber and epoxy resin. Split disk test and short-beam test, which are the general test methods for filament wound composite material, were selected as evaluation methods for a filament would part. The optimal processing parameters for the filament winding were easily found through the analysis of variance of the experimental results.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.457-458
• /
• 2002

The fractal dimension is the characteristics that can quantitatively define the irregularity in natural. It is useful in describing the morphology or various rubbed surface for hydraulic piston motor instead of the stylus profiling method. But fractal parameters had not constructed on the morphological characteristic or rubbed surface because of the insufficient knowledge about a conception of fractal dimension. In this study, for the purpose or applying fractal I parameters practically, we have suggested way to establish the morphological characteristic of rubbed surface with fractal parameters, and we carried out an experiment on the lubricant friction and wear by using Ball-ON-Disk type tester. Materials were the brass and the bronze which are used to slipper-pad in the hydraulic piston motor. We searched for fractal parameters or surface structure with the digital image processing, Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Using the image processing and fractal parameters for rubbed surface in the friction and wear test, morphology of rubbed sur race can be effectively obtained by fractal dimensions.

• Journal of Information Processing Systems
• /
• 제18권3호
• /
• pp.374-388
• /
• 2022

Database systems usually have many parameters that must be configured by database administrators and users. RocksDB achieves fast data writing performance using a log-structured merged tree. This database has many parameters associated with write and space amplifications. Write amplification degrades the database performance, and space amplification leads to an increased storage space owing to the storage of unwanted data. Previously, it was proven that significant performance improvements can be achieved by tuning the database parameters. However, tuning the multiple parameters of a database is a laborious task owing to the large number of potential configuration combinations. To address this problem, we selected the important parameters that affect the performance of RocksDB using random forest. We then analyzed the effects of the selected parameters on write and space amplifications using analysis of variance. We used a genetic algorithm to obtain optimized values of the major parameters. The experimental results indicate an insignificant reduction (-5.64%) in the execution time when using these optimized values; however, write amplification, space amplification, and data processing rates improved considerably by 20.65%, 54.50%, and 89.68%, respectively, as compared to the performance when using the default settings.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.401-404
• /
• 2004

SAR (Synthetic Aperture Radar) signal data need a focusing procedure to make the information available to the user. In recent SAR systems, various sensing modes and mission operations are applied to acquire high-resolution SAR images. Therefore, in order to develop generalized focusing software for multi-satellites, a regularized parameter configuration that sufficiently represents sensor and platform characteristics of the SAR system is required. The objective of this paper is to introduce the consideration of parameter definition for developing a generalized SAR processor and to discuss the flexibility and extensibility of defined parameters. The proposed parameter configuration can be applied to a SAR processor. Experiments based on real data will show the suitability of the suggested processing parameters.