• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.85-108
• /
• 1991

Marine seismic processing is characterized by a great amount of data, several professional processing steps, and various parameters to be decided in each step. In general, adequate processing sequence and optimum parameters are obtained through test processing with sample set of data representing the whole group. The sequence and parameters are then applied in processing the whole data. In this paper, optimum processing sequence and parameters for the data acquired in Korean continental shelf are examined through test processing with real data. Finally, a good-quality migration section is produced using those sequence and parameters decided on the basis of the test results.

• Journal of Welding and Joining
• /
• v.19 no.2
• /
• pp.228-234
• /
• 2001

A methodology is developed and used to evaluate the response sensitivity of the thermal systems to variations in their design parameters. Technique for computing the sensitivity of temperature distributions to changes in processing parameters needed to decide the more effective laser input parameters for laser surface hardening treatment is considered. In this study, a state equation governing the heat flow in laser surface treatment is analyzed using a three-dimensional finite element method and sensitivity data of the processing parameter obtained using a direct differentiation method is applied to the sensitivity analysis. The interesting processing parameters are taken as the laser scan velocity and laser beam radius ( $r_{ b}$), and the sensitivities of the temperature T versus v and $r_{b}$ are analyzed. These sensitivity results are obtained with another parameters fixed. To verify the numerical analysis results, hardened layer dimensions (width and depth) of the numerical analysis are compared with the experimental ones.nes.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.260-263
• /
• 2000

A methodology is developed and many used to evaluate the response sensitivity of the thermal systems to variations in their design parameters. Technique for computing the sensitivity of temperature distributions to changes in processing parameters needed for deciding the more effective laser input parameters for laser surface hardening treatment are considered. In this study, a state equation governing the heat flow in laser surface treatment is analyzed using a three-dimensional finite element method and sensitivity data of the processing parameter obtained using a direct differentiation method applied for sensitivity analysis. The interesting processing parameter is taken as the laser scan velocity and characteristic beam radius( $r_{b}$) of the sensitivity of the temperature T versus v and $r_{b}$ is analyzed. And these sensitivity results obtained in another parameters are fixed condition. To verifying the numerical analysis results, hardened layer dimensions (width and depth) of the numerical analysis compared with the results of an experimental data.ata.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.344-353
• /
• 2000

Recent mechatronics technology is the most appropriate high technology in the agricultural application to save repetitious labor. Cow's body parameters were measured by traditional several measurer. Image processing technology was used to measure automatically their parameters to reduce lots of labor and time. The parameters were measured form a small model cow, which is easily measured, instead to a real cow. The image processing system designed and built for this project was composed of a Pentium PC, and TV frame card two cameras which were located on side and top of model cow. 11 parameters of cow's body were measured and the error between real data and the data by image processing was less than 10%. Based on the results of this research the parameters of a real cow could be measured in the future.

• Journal of Biosystems Engineering
• /
• v.37 no.2
• /
• pp.122-129
• /
• 2012

Purpose: Recent mechatronics technology is the most appropriate high technology in agricultural applications to save repetitious labor. Method: Cow's body parameters were measured by several traditional measurers. Image processing technology was used to measure automatically their parameters to reduce labor and time. The parameters were measured form a small model cow which is easily measured, instead to a real cow. The image processing system designed and built for this project was composed of a PC, grabber card, and two cameras, which are located on the side and the top of the model cow. Tests of verification had measured 10 dairy cows. Result: Nine parameters of the model cow's body were measured, and the difference between the real data and the data by image processing was less than 16.7%. Based on the results of the research, the parameters of a real cow had measured of chest depth, withers height, Pelvic arch height, body length, slope body length, chest width, hip width, thurl width, and pin bone width were compared with image processing data. Conclusions: In the Demonstration test, Result had obtained similar data of cow model experiments, and the most of errors were shown less than 5% relatively good result.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.1
• /
• pp.39-43
• /
• 2007

Geocomposites of needle punched and spunbonded nonwovens having the reinforcement and drainage functions were manufactured by use of thermal bonding method. The physical properties (e.g. tensile, tear and bursting strength, permittivity) of these multi-layered nonwovens were dependent on the processing parameters of temperatures, pressures, bonding periods etc. - in manufacturing by use of thermal bonding method. Therefore, it is very meaningful to optimize the processing parameters and physical properties of the geocomposites by thermal bonding method. In this study, an algorithm has been developed to optimize the process of the geocomposites using an artificial neural network (ANN). Geocomposites were employed to examine the effects of manufacturing methods on the analysis results and the neural network simulations have been applied to predict the changes of the nonwovens performances by varying the processing parameters.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.208-211
• /
• 2000

Processing parameters of filament winding were investigated by using design of experiment. To understand 4 main effects(fiber tension, impregnation pressure, processing rate, and temperature) and 3 interactions, $L_{27}(3^{13})$ orthogonal array table was adopted. The used materials were carbon fiber and epoxy resin. Split disk test and short-beam test, which are the general test methods for filament wound composite material, were selected as evaluation methods for a filament would part. The optimal processing parameters for the filament winding were easily found through the analysis of variance of the experimental results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.457-458
• /
• 2002

The fractal dimension is the characteristics that can quantitatively define the irregularity in natural. It is useful in describing the morphology or various rubbed surface for hydraulic piston motor instead of the stylus profiling method. But fractal parameters had not constructed on the morphological characteristic or rubbed surface because of the insufficient knowledge about a conception of fractal dimension. In this study, for the purpose or applying fractal I parameters practically, we have suggested way to establish the morphological characteristic of rubbed surface with fractal parameters, and we carried out an experiment on the lubricant friction and wear by using Ball-ON-Disk type tester. Materials were the brass and the bronze which are used to slipper-pad in the hydraulic piston motor. We searched for fractal parameters or surface structure with the digital image processing, Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Using the image processing and fractal parameters for rubbed surface in the friction and wear test, morphology of rubbed sur race can be effectively obtained by fractal dimensions.

• Journal of Information Processing Systems
• /
• v.18 no.3
• /
• pp.374-388
• /
• 2022

Database systems usually have many parameters that must be configured by database administrators and users. RocksDB achieves fast data writing performance using a log-structured merged tree. This database has many parameters associated with write and space amplifications. Write amplification degrades the database performance, and space amplification leads to an increased storage space owing to the storage of unwanted data. Previously, it was proven that significant performance improvements can be achieved by tuning the database parameters. However, tuning the multiple parameters of a database is a laborious task owing to the large number of potential configuration combinations. To address this problem, we selected the important parameters that affect the performance of RocksDB using random forest. We then analyzed the effects of the selected parameters on write and space amplifications using analysis of variance. We used a genetic algorithm to obtain optimized values of the major parameters. The experimental results indicate an insignificant reduction (-5.64%) in the execution time when using these optimized values; however, write amplification, space amplification, and data processing rates improved considerably by 20.65%, 54.50%, and 89.68%, respectively, as compared to the performance when using the default settings.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.401-404
• /
• 2004

SAR (Synthetic Aperture Radar) signal data need a focusing procedure to make the information available to the user. In recent SAR systems, various sensing modes and mission operations are applied to acquire high-resolution SAR images. Therefore, in order to develop generalized focusing software for multi-satellites, a regularized parameter configuration that sufficiently represents sensor and platform characteristics of the SAR system is required. The objective of this paper is to introduce the consideration of parameter definition for developing a generalized SAR processor and to discuss the flexibility and extensibility of defined parameters. The proposed parameter configuration can be applied to a SAR processor. Experiments based on real data will show the suitability of the suggested processing parameters.