• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.399-404
• /
• 2013

This article proposes a digital image correlation (DIC) strain measurement method based on a finite element (FE) algorithm. A two-step digital image correlation is presented. In the first step, the gradient-based subpixels technique is used to search the displacements of a region of interest of the specimen, and then the strain fields are obtained by utilizing the finite element method in the second step. Both simulation and experiment processing, including tensile strain deformation, show that the proposed method can achieve nearly the same accuracy as the cubic spline interpolation method in most cases and higher accuracy in some cases, such as the simulations of uniaxial tension with and without noise. The results show that it also has a good noise-robustness. Finally, this method is used in the uniaxial tensile testing for Dahurian Larch wood specimens with or without a hole, and the obtained strain values are close to the results which were obtained from the strain gauge and the cubic spline interpolation method.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.562-569
• /
• 1998

The limit drawing ratio (LDR) is a major process parameter in the process design of deep drawing. If the actual drawing ratio is greater than the LDR for a particular stage then an intermediate stage has to b added the process sequence to avoid failure during the drawing operation and the optimal process design considering for the first-drawing and redrawing by using finite element method combined with ductile fracture criterion. From the results of finrte element analysis the optimal value of drawing ratio is obtained which contributes to the more uniform distribution of thickess and the smaller values of the ductile fracture infinal cup.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.614-622
• /
• 2004

A new approach for the automatic elimination of free edges in the finite element model for the analysis of sheet metal forming processes is presented. In general, the raw finite element model constructed from an automatic mesh generator is not well suited for the direct use in the downstream forming analysis due to the many free edges which requires tedious time consuming interactive graphic operations of the users. In the present study, a general method for the automatic elimination of free edges is proposed by introducing a CAD/CAE hybrid method. In the method a trimmed parametric surface is generated to fill the holes which are orginated from the free edges by using the one step elastic finite element analysis. In addition, mesh generation algorithm is suggested which can be used in the general trimmed surface. In order to verify the validity of the proposed method, various examples including actual automobile sheet metal parts are given and discussed.

• Transactions of Materials Processing
• /
• v.23 no.5
• /
• pp.311-316
• /
• 2014

In the current study, the R-value behavior of a two-layer clad steel was investigated using finite element analysis. Hill's 1948 anisotropic yield equation was employed to characterize the anisotropic behavior of the steel with different assumed properties: isotropic (R=1) and anisotropic (R=2). Experimental R-values were determined by measuring the width and thickness ratios of tensile specimens. Finite element analysis results demonstrate a difference in strain behavior in the width and the thickness directions of the clad steel. The R-value behavior depends on the fraction of the clad materials and total elongation.

• Transactions of Materials Processing
• /
• v.12 no.7
• /
• pp.668-674
• /
• 2003

Rigid-plastic finite element analyses on the deformation of slabs at various width reductions have been performed. By using commercial finite element code, dog-bone profile, crop profile and the longitudinal width profile after edging and Horizontal rolling have been analysed. The deformation behavior of slab for the heavy edger mill has also been compared with that for the sizing press. From the deformation analyses, it was found that the sizing press-horizontal rolling method is more efficient in width reduction than that of heavy edger mill-horizontal rolling. The results of finite element analyses fer the deformation of slab were well confirmed by the actual operational data. It was found that the amount of width variation after sizing and rolling is about 5∼10mm.

• Transactions of Materials Processing
• /
• v.28 no.4
• /
• pp.197-202
• /
• 2019

This paper proposes a precise mathematical model for the prediction of the variation of the roll force across a strip in cold rolling. It further describes the deformation characteristics of the strip using a 3-D finite element method. The different features of hot rolling and cold rolling through a 3-D finite element method are shown. The predicted roll force profile and tension profile are verified through comparison with the prediction from a 3-D finite element method.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1091-1095
• /
• 2001

Finite element analysis showed that strong magnetic fields were distributed around the arc furnace where the strongest magnetic field was generated around the three phase cables, and followed by the electrodes and the mast arm in decreasing order. Magnetic field decay patterns around the arc furnace could be fitted by introducing exponential formula,$Y=Y_0+Ae^{\frac-{x}{t}}$. These results showed that magnetic field intensities around the arc furnace could be estimated at any 3-dimensional positions using the finite element method (FEM).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.203-211
• /
• 2012

This paper proposes a $16{\times}16$ and $32{\times}32$ inverse transform architecture for HEVC (High Efficiency Video Coding). HEVC large transform of $16{\times}16$ and $32{\times}32$ suffers from huge computational complexity. To resolve this problem, we proposed a new large inverse transform architecture based on hardware reuse. The processing element is optimized by exploiting fully recursive and regular butterfly structure. To achieve low area, the processing element is implemented by shifters and adders without multiplier. Implementation of the proposed 2-D inverse transform architecture in 0.18 ${\mu}m$ technology shows about 300 MHz frequency and 287 Kgates area, which can process 4K ($3840{\times}2160$)@ 30 fps image.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.43-51
• /
• 1997

In this paper, we quantize the image data to simplify the systolic array architecture for block matching algorithm. As the number of bits for pixel data to be processed is reduced by quantization, one can simplify the hardware of systolic array. Especially, if the bit serial input is used, one can even more simplify the structure of processing element. First, we analize the effect of quantization to a block matching. then we show the structure of quantizer and processing element when bit serial input is used. The simulation results applied to standard images have shown that the proposed block matching method has less prediction error than the conventional high speed algorithm.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.421-426
• /
• 2003

Micro-suing that used on micro mechanism should be equal to distance between pitch and correct of shape. Therefore, micro spring must make by super-precision working. But, current step of super-precision processing depends on special quality of work piece and is ineffective the aspect of cost and productivity yet. Also, to use as demandable length shearing process perform but even if make precision spring, in the aspect of quality of coil spring make difficult that produce product of good quality. Therefore, purpose of this study presented proposed process that extract the point of processing factor after perform finite element analysis applying existing sheet shearing process to suing shearing process consider cost and productivity after evaluate.