• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.111-120
• /
• 2005

A mobile ad-hoc network is an autonomous system of mobile nodes which are free to move around randomly and organize themselves arbitrarily, hence a routing protocol that handles the dynamic network topology changes is required for the network. In this paper we present a multi -Path on-demand routing protocol called R-DSR (Robust Dynamic Source Routing), an extension to the existing IETF protocol DSR. The proposed protocol has it that every pair of 2-hop away nodes on the single route is additionally connected via an alternative node. Throughout mathematical analysis we show the proposed protocol reveals higher message delivery rate than that of the Das's multi-path protocol, currently known as one of the most typical approaches related to DSR.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.441-444
• /
• 2006

The deformation behavior of copper during equal channel angular pressing(ECAP) was calculated using a three-dimensional version of a constitutive model based on the dislocation density evolution. Finite element simulations of the variation of the dislocation density and the dislocation cell size with the number of ECAP passes are reported. The calculated stress, strain and cell size are compared with the experimental data for Cu deformed by ECAP in a modified Route C regime. The results of FEM analysis were found to be in good agreement with the experiments. After a rapid initial decrease down to about 200nm in the first ECAP pass, the average cell size was found to change little with further passes. Similarly, the strength increased steeply after the first pass, but tended to saturate with further pressings. The FEM simulations also showed strain non-uniformities and the dependence of the resulting strength on the location within the workpiece.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1159-1166
• /
• 2010

Today, detecting the location of moving object has been traced as various methods in our world. In this paper, we preset the system to improve the estimation accuracy utilizing detail localization using radar sensor based on WSN and situational awareness for a calibration (context aware) database, Rail concept. A variety of existing location tracking method has a problem with receiving of data and accuracy as tracking methodology, and since these located data are the only data to be collected for location tracing, the context aware or monitering as the surrounding environment is limited. So, in this paper, we enhanced the distance aware accuracy using radar sensor utilizing the Doppler effect among the distance measuring method, estimated the location using the Triangulation algorithm. Also, since we composed the environment data(temperature, illuminancem, humidity, noise) to entry of the database, it can be utilized in location-based service according to the later action information inference and positive context decision. In order to verify the validity of the suggested method, we give a few random situation and built test bed of designed node, and over the various test we proved the utilizing the context information through route tracking of moving and data processing.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.5-8
• /
• 2005

MOD Process using metal acetates or trifluoroacetates has been considered to be a strong candidate for a low cost fabrication process for coated conductor with high $J_e$. Recently, an economical MOI) process has been developed for coated conductor with high $J_c$ using low cost starting materials such as YBCO powders. YBCO thin films prepared by single coating on LAO substrate with this modified oxide-precursor solution gives transport $I_c$ of 100A/cm-w and the $J_c$ value of $2.9MA/cm^{2}$ (77K, Self-field). The YBCO coated conductor prepared by single coating with $CeO_2/IBAD-YSZ/SS$ tape gives transport $I_c$ of 50A/cm-w in 2cm. Characterization with XRD, SEM shows that the YBCO layers were epitaxially grown and exhibit well-developed dense micro-structures. This newly developed oxide-precursor based MOD process will provide a low cost route to coated conductor with high $J_c$.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.142-145
• /
• 2005

YBCO coated conductors have been fabricated with a newly developed oxide-precursor-based MOD process. The precursor solution was synthesized with low cost YBCO powders as starting materials and YBCO coated conductors have been deposited on IBAD substrate ($CeO_2$/IBAD-YSZ/SS). YBCO coated conductor prepared by dip coating shows transport $I_c$ of 15A/cm-w at 77 K. Microstructural and crystallographic analyses indicate that YBCO layer was grown in epitaxy with substrate and exhibited well-developed dense microstructure. Also discussed are processing and analysis of YBCO coated conductor by slot-die web coating method. It was shown that this oxide-based MOD process provides a low cost route to coated conductor with high $J_c$.

• Journal of Korea Foundry Society
• /
• v.25 no.5
• /
• pp.203-208
• /
• 2005

The main emphasis of this study is to optimize the process variables for manufacturing aluminum foam materials by direct foaming of remelted aluminum scraps. Aluminum foams were fabricated from two different raw materials, pure aluminum and used beverage cans. For both cases, $TiH_{2}$ was used as a foaming agent. Calcium was added as a thickener for the foaming of pure aluminum and no thickener was added for that of used beverage Cans because the pre-existing oxides of the used beverage cans are used as a thickener. Calcium and $TiH_{2}$ content varies from 0.5wt.% to 2.0wt.% and from 0.5wt.% to 1.5wt.%, respectively. The processing conditions, such as the effect of calcium on the melt viscosity, foaming temperature, and the optimum amount of the foaming agent with regard to the melt viscosity were discussed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.396-396
• /
• 2009

Chalcopyrite semiconductor $CuInSe_2$ nanoparticles were prepared using a low temperature colloidal route by reacting the starting materials (CuI, $InI_3$ and $Na_2Se$) in solvents. After synthesised $CuInSe_2$ nanoparticles precursors were mixed with organic binder for the viscosity of the precursor slurry to be suitable for the doctor blade method. The mixture of $CuInSe_2$ and binder was deposited onto molybdenum-coated sodalime glass substrates to form thin film. The precursor thin films were preheated on the hot plate to remove remaining solvents and binder material. After subsequent thermal processing of the thin film under a selenium ambient, $CuInSe_2$ absorber layer with grain size significantly lager than that of the nanoparticles was formed.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.5
• /
• pp.1120-1128
• /
• 2005

To investigate the toxic of herbs used in , the author analyzed herbs with toxic recorded in , , after searched toxic herbs literarily. Herbs with toxicity recorded in both and were total 17 species, and recorded in were total 13 species, and recorded in were total 12 species. The major cause that herbs generates a side effect in a human body is implicit use and abuse, inadequate processing the herbs, use of quack medicines of herbs and clinical use which is improper in symptoms and internal use, differences of constitution. The major toxic component in herbs is an alkaloid, essential oil and hydrargyrum (Hg), and the main invasion route of toxic herbs in human body is the liver, kidney, lungs, and gastrointestinal tract.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.157-162
• /
• 2001

An optimum route to fabricate the ferrous alloy dispersed $Al_2O_3$ nanocomposites such as $Al_2O_3$/Fe-Ni and $Al_2O_3$/Fe-Co with sound microstructure and desired properties was investigated. The composites were fabricated by the sintering of powder mixtures of $Al_2O_3$ and nano-sized ferrous alloy, in which the alloy was prepared by solution-chemistry routes using metal nitrates powders and a subsequent hydorgen reduction process. Microstructural observation of reduced powder mixture revealed that the Fe-Ni or Fe-Co alloy particles of about 20 nm in size homogeneously surrounded $Al_2O_3$, forming nanocomposite powder. The sintered $Al_2O_3$/Fe-Ni composite showed the formation of Fe$Al_2O_4$ phase, while the reaction phases were not observed in $Al_2O_3$/Fe-Co composite. Hot-pressed $Al_2O_3$/Fe-Ni composite showed improved mechanical properties and magnetic response. The properties are discussed in terms of microstructural characteristics such as the distribution and size of alloy particles.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.271-279
• /
• 1998

This paper discusses the development of compaction management system using Real Time Kinematic (RTK) GPS technology for the efficient management or compaction. The use or RTK provides the land surveyors with a graphical display of his/her corrected position on the ground at that moment in time. In this work, we intended to improve the efficiency of compaction management showing the route of rollers and the total number of compaction obtained from management software (GPSROLL v.1.0) developed in this study. The RTK GPS system installed on the roller. To improve the efficiency of field management, GPSROLL software provides also data processing module for the field soil test and the field surveying data. GPSROLL system is based on the Korean GUI for user-friendly data input and output.