Jun Sang Ahn;Dong Hun Kang;Bo Hye Park;Ki Yong Chung
Journal of Practical Agriculture & Fisheries Research
/
v.25
no.4
/
pp.127-137
/
2024
This study was conducted to investigate effect of corn flake and corn ground on nutrient digestibility and fermentation characteristics of rumen in Hanwoo. The animals used were three Hanwoo cows implanted with ruminal fistula. Corn were categorized in 2 groups based on the corn processing method: Ground and Flake. The rumen digestibility of dry matter, starch, nitrogen free extract and non fiber carbohydrates were increased in flake compared to ground from 3 to 24 hours of incubation(P<0.05). The pH of rumen was lower in the flaked treatment than ground treatment at 3 hours after incubation, but average pH was no significantly difference between treatments. The average acetic acid, propionic acid and butyric acid were significantly increased in the flaked treatments compared to the ground treatment (P<0.05). Thus, flake processing can improve the carbohydrate availability of corn in the rumen and increase feed value.
The physical and processing properties of acorn jelly were investigated to see the effect of polysaccharides in seaweed extract and corn starch. The yield of acorn jelly added starch concentration was slightly increased when the concentration was added more. However, moisture content and color had no significant changes with concentration. In the case of acorn jelly added sea tangle, color of acorn jelly was darker, but color of the jelly with carrageenan was lighter. According to the concentration of seaweed extract, the hardness was increased as concentration was added. The texture of acorn Jelly added agar had the highest binding. In the case of acorn jelly added corn starch, there were no significant changes, but this binding was stronger than the acorn jelly added extract of marine algae. In the physical and sensory properties of acorn jelly with corn starch, the ideal mixture ratio between the acorn jelly and the corn starch was 6:4.
The objective of these studies were to examine the effects of processing methods of corn grains on in vitro dry matter digestability and in sacco degradability in the rumen by three ruminally cannulated dry Holstein cows. The corns for these experiments were untreated; whole corn L(density; 660 g/$\ell$), whole corn H(density; 740 g/$\ell$), and treated by four different types: Ground corn, 3.8 mm, 2.8 mm, and 1.5 mm flaked corns. The results obtained were summarized as follows: The DM degradabilities, after 48 hr incubation by in sacco method, were the highest(94.4, 88.0 and 87.0%, respectively) in 1.5 mm flaked corn, ground corn, and 2.8 mm flaked corn. The 3.8 mm flaked corn was degraded significantly lower than these. Until 12 hr incubation, whole corn L tended to be degraded little more than whole corn H, was not significantly different. However, after 24 hr incubation, the significant differences between whole corn L and whole corn H were shown(P<0.05). The DM digestabilities by in vitro digestion were the highest for 1.5 mm flaked corn and ground corn(92.3 and 91.2%, respectively)(P<0.05), followed by 2.8 mm and 3.8 mm flaked corn(83.9 and 83.4%, respectively), tended to be similar to those by in sacco method. Whole corn L was digested twice more rapidly than whole corn H. Summarizing the experimental data, compared with unprocessed corns, the flaked corns were significantly increased in the degradabilities of dry matter in the rumen. In addition, as increasing the flaking degree of corn, the degradabilities of dry matter were significantly improved. Referring to these kinds of physical characteristics of grain sources in the ruminal degradabilities, it is believed to be possible to optimize the environment of the fermentation in the rumen.
Park, Hoe-Man;Cho, Kwang-Hwan;Hong, Seong-Gi;Lee, Sun-Ho
Journal of Biosystems Engineering
/
v.35
no.3
/
pp.163-168
/
2010
With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.
Journal of the Korean Society of Food Science and Nutrition
/
v.32
no.8
/
pp.1193-1199
/
2003
As a result of resistant starch yield depending on heating temperature, moisture content, storage temperature and heating-cooling cycle with RSM (response surface methodology), high amylose corn starch (46%) was appeared higher than normal corn starch in the yield (22%). At the high amylose corn starch, optimum conditions for resistant starch formation were 6 times of heating-cooling cycle, 108$^{\circ}C$ heating temperature and 67% moisture content at the 2$0^{\circ}C$ storage temperature, which resulted in 25% yield with these experiment conditions. Affecting factor for the resistant starch formation was arranged according to heating -cooling cycle, moisture content, heating temperature and storage temperature. Raw corn starch granule was destructive and appeared a porous reticular structure by the resistant starch formation. Color became dark and increased yellowness by caramelization during heating processing. Heating-cooling processing was the result of decreased hardness, cohesiveness, springiness and gumminess.
This study was performed to investigate aflatoxin reduction resulting from the pre-treatment and the cooking and processing of corn. Aflatoxin was produced by Aspergillus parasiticus ATCC 15517 on a type of corn imported from the United States. The aflatoxin-produced com (AC) was pre-treated in three ways in order to reduce aflatoxin: exposure to sun light for 7 days (SC); ultraviolet irradiation for 56 hours (UC); and washing with water three times (WC). Four kinds of cooking and processing methods (boiling, steaming, baking, and popping) were used to reduce aflatoxin in the AC control, SC, UC, and WC. These treatments produced com gruel, com cakes, com bread and popcorn. The aflatoxin content in the samples was determined by high performance liquid chromatography. The total aflatoxin level of the AC was significantly decreased by sun light and UV (p<0.05), and decreased by washing. After cooking and processing the AC, SC, UC, and WC, and averaging the total aflatoxin levels in the final products, the greatest reduction was found in the com gruel, then the popcorn, then the corn cakes, and the least reduction in the com bread. These results indicate that sunlight and ultraviolet energy could be effective factors in aflatokin degradation in corn before cooking and processing. This study also indicates that boiling, steaming, baking and popping were helpful in reducing the aflatoxin level in the com and that the most helpful factors were exposure time to heat. More research is needed to reduce the aflatoxin level down to below the maximum tolerable level of aflatoxin in foods.
Eight Holstein steers ($216{\pm}48kg$ body weight) fitted with ruminal and duodenal cannulas were used to evaluate effects of wheat straw processing (ground vs pelleted) at two straw inclusion rates (7% and 14%; dry matter basis) in dry rolled or steam-flaked corn-based finishing diets on characteristics of digestion. The experimental design was a split plot consisting of two simultaneous $4{\times}4$ Latin squares. Increasing straw level reduced ruminal (p<0.01) and total tract (p = 0.03) organic matter (OM) digestion. As expected, increasing wheat straw level from 7% to 14% decreased (p<0.05) ruminal and total tract digestion of OM. Digestion of neutral detergent fiber (NDF) and starch, per se, were not affected (p>0.10) by wheat straw level. Likewise, straw level did not influence ruminal acetate and propionate molar proportions or estimated methane production (p>0.10). Pelleting straw did not affect ($p{\geq}0.48$) ruminal digestion of OM, NDF, and starch, or microbial efficiency. Ruminal feed N digestion was greater (7.4%; p = 0.02) for ground than for pelleted wheat straw diets. Although ruminal starch digestion was not affected by straw processing, post-ruminal (p<0.01), and total-tract starch (p = 0.05) digestion were greater for ground than for pelleted wheat straw diets, resulting in a tendency for increased post-ruminal (p = 0.06) and total tract (p = 0.07) OM digestion. Pelleting wheat straw decreased (p<0.01) ruminal pH, although ruminal volatile fatty acids (VFA) concentration and estimated methane were not affected ($p{\geq}0.27$). Ruminal digestion of OM and starch, and post-ruminal and total tract digestion of OM, starch and N were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal NDF digestion was greater (p = 0.02) for dry rolled than for steam-flaked corn, although total tract NDF digestion was unaffected (p = 0.94). Ruminal microbial efficiency and ruminal degradation of feed N were not affected (p>0.14) by corn processing. However, microbial N flow to the small intestine and ruminal N efficiency (non-ammonia N flow to the small intestine/N intake) were greater (p<0.01) for steam-flaked than for dry rolled corn-based diets. Ruminal pH and total VFA concentration were not affected ($p{\geq}0.16$) by corn processing method. Compared with dry rolled corn, steam-flaked corn-based diets resulted in decreased acetate:propionate molar ratio (p = 0.02). It is concluded that at 7% or 14% straw inclusion rate, changes in physical characteristics of wheat straw brought about by pelleting negatively impact OM digestion of both steam-flaked and dry-rolled corn-based finishing diets. This effect is due to decreased post-ruminal starch digestion. Replacement of ground straw with pelleted straw also may decrease ruminal pH.
Objective: The research was conducted to determine the digestible (DE) and metabolizable energy (ME) contents as well as the apparent total tract digestibility (ATTD) of nutrients in corn, waxy corn and steam-flaked corn fed to growing pigs. Methods: Eighteen growing pigs with initial body weight of $15.42{\pm}1.41kg$ were randomly allotted to three diets including a corn diet, a waxy corn diet and a steam-flaked corn diet in a completely randomized design. Each treatment contained six replicates. The experiment lasted for 12 days, which comprised 7-d adaptation to diets followed by a 5-d total collection of feces and urine. The energy contents and the nutrient digestibility in three ingredients were calculated using direct method. Results: Compared to normal corn, both the amylose and dietary fiber contents in waxy corn were numerically lower, but the starch gelatinization degree was numerically greater. Moreover, the DE and ME contents as well as the ATTD of neutral detergent fiber and acid detergent fiber (ADF) in waxy corn were significantly greater (p<0.05) than those in normal corn when fed to growing pigs. Furthermore, the steam-flaked corn had greater (p<0.05) DE and ME contents, and ATTD of ether extract and ADF compared to normal corn. Conclusion: Both variety and processing procedure have influence on chemical compositions, energy contents and nutrient digestibility of corn. The waxy corn and steam-flaked corn had greater degree of starch gelatinization and DE and ME contents compared to normal corn when fed to growing pigs.
The levels of aflatoxin (AFT) and ochratoxin (OCT) were assessed at different seasons in raw materials, different feed manufacture processing stages, and animal feeds in feed mills in Korea implementing the hazard analysis and critical control point (HACCP) system. Two hundred samples were collected in all four seasons from five feed mills implementing the HACCP system and examined for AFT and OCT contents. The AFT and OCT levels were analysed by using HPLC method to provide information on raw material and product stage. The AFT content of raw ingredients in the spring season was highest in corn gluten (3.84 ppb) and lowest in corn (1.82 ppb) The AFT content of corn was highest in the winter season (2.17 ppb). The content of OCT in wheat was highest in the winter season. The amounts of AFT and OCT at processing stages were higher than in the raw materials or feed. In particular, AFT content was higher in the transfer stage (3.88 ppb) than in the mixing (2.86 ppb) or filling stages (3.45 ppb) in the summer season. The means of AFT and OCT level in laying hen feed was 3.41 ppb and 1.14 ppb for broiler feed, respectively. The means of AFT and OCT level in and broiler feeds was 3.44 ppb and 1.17 ppb for broiler feed, respectively.
The study was performed to investigate the degrees of gelatinization at various processing steps during the preparation of Dangmyuns using sweet potato, potato, corn and tapioca starches, and also determined the rehydration of the freeze dried sweet potato Dangmyun. The degrees of gelatinization after extrusion cooking showed higher value than other processing steps. The degrees of gelatinization after extrusion cooking were 63.5% in sweet potato, 80.0% in potato, 82.3% in corn, and 86.5% in tapioca Dangmyuns. The degree of gelatinization in Dangmyuns after extrusion cooking step decreased as the processing steps, such as cold storage, freezing, thawing, and sun drying, progressed. L values of color in Dangmyuns decreased in the order of corn>tapioca>potato>sweet potato Dangmyuns. The cooking loss decreased in the order of tapioca>corn>potato>sweet potato Dangmyuns. The percentage of weight gain was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. The water absorption rate constant was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. In the rehydration of freeze dried Dangmyuns, freeze dried sweet potato Dangmyun showed better than the others. An increase from 60% to 70% of the added amount of water in the mixing step resulted in an increase of the degrees of gelatinization after extrusion cooking from $63.4{\sim}70.7%$ to $73.8{\sim}75.0%$. An increase of the added water in the mixing step and a decrease of diameter in the extrusion cooking step slightly improved the rehydration in the boiled water of freeze dried sweet potato Dangmyun.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.