• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.181-189
• /
• 2017

The conventional delivery quality assurance (DQA) process for RapidArc (Varian Medical Systems, Palo Alto, USA), has the limitation that it measures and analyzes the dose in a phantom material and cannot analyze the dosimetric changes under the motional organ condition. In this study, a DQA method was designed to overcome the limitations of the conventional DQA process for internal target volume (ITV) based RapidArc. The dynamic DQA measurement device was designed with a moving phantom that can simulate variable target motions. The dose distribution in the real volume of the target and organ-at-risk (OAR)s were reconstructed using 3DVH with the ArcCHECK (SunNuclear, Melbourne, USA) measurement data under the dynamic condition. A total of 10 ITV-based RapidArc plans for liver-cancer patients were analyzed with the designed dynamic DQA process. The average pass rate of gamma evaluation was $81.55{\pm}9.48%$ when the DQA dose was measured in the respiratory moving condition of the patient. Appropriate method was applied to correct the effect of moving phantom structures in the dose calculation, and DVH data of the real volume of target and OARs were created with the recalculated dose by the 3DVH program. We confirmed the valid dose coverage of a real target volume in the ITV-based RapidArc. The variable difference of the DVH of the OARs showed that dose variation can occur differently according to the location, shape, size and motion range of the target. The DQA process devised in this study can effectively evaluate the DVH of the real volume of the target and OARs in a respiratory moving condition in addition to the simple verification of the accuracy of the treatment machine. This can be helpful to predict the prognosis of treatment by the accurate dose analysis in the real target and OARs.

• Structural Monitoring and Maintenance
• /
• 제5권1호
• /
• pp.79-92
• /
• 2018

The evaluation theory of reliability, availability, maintainability and safety (RAMS) as a mature theory of state evaluation in the railway engineering, can be well used to the evaluation, management, and maintenance of complicated structure like the long-span bridge structures on the high-speed railway. Taking a typical steel-truss arch bridge on the Beijing-Shanghai high-speed railway, the Nanjing Dashengguan Yangtze River Bridge, this paper developed a new method of state evaluation for the existing steel-truss arch high-speed railway bridge. The evaluation framework of serving state for the bridge structure is presented based on the RAMS theory. According to the failure-risk, safety/availability, maintenance of bridge members, the state evaluation method of each monitoring item is presented. The weights of the performance items and the monitoring items in all evaluation levels are obtained using the analytic hierarchy process. Finally, the comprehensive serving state of bridge structure is hierarchical evaluated.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.57-65
• /
• 2016

Threat evaluation is a process to estimate the threat score which enemy aerial threat poses to defended assets. The objective of threat evaluation is concerned with making an engagement priority list for optimal weapon allocation. Traditionally, the threat evaluation of massive air threats has been carried out by air defence experts, but the human decision making is less effective in real aerial attack situations with massive enemy fighters. Therefore, automation to enhance the speed and efficiency of the human operation is required. The automatic threat evaluation by air defense experts who will perform multi-variable judgment needs formal models to accurately quantify their linguistic evaluation of threat level. In this paper we propose a threat evaluation model by using a fuzzy rule-based inference method. Fuzzy inference is an appropriate method for quantifying threat level and integrating various threat attribute information. The performance of the model has been tested with a simulation that reflected real air threat situation and it has been verified that the proposed model was better than two conventional threat evaluation models.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1802-1809
• /
• 2011

A distribution method of limited budget for rail line facility improvement is to use investment priorities of rail line segments based on their deterioration. In this paper we present an evaluation method of rail line segment deterioration which can be used to distribute limited budget. Rail line facilities include rail track, crossing, road bed, bridge, tunnel. These facilities deterioration and line shape can affect line segment deterioration. Deterioration evaluation method we present is a weighted sum of each component deterioration scores. The component weight can be obtained from experts using analytic hierarchy process.

• 미생물학회지
• /
• 제27권4호
• /
• pp.436-438
• /
• 1989

We propose a method for rapid evaluation and permanent record of sodium dodecyl sulfate polyacrylamide gel electrophoretic runs. This method is based on the photocopy process, rather than on photography and requires no extensive or expensive investment. Comparison of a print obtained through this method and a 35mm photography indicated, on a balanced gel, equal sensitivity.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.23-30
• /
• 2017

건설산업 분야에서 빌딩정보모델링(BIM)은 단지 설계를 보다 쉽게 지원하고, 3차원 모델을 구현하기 위한 도구만은 아니다. 왜냐하면, 설계, 시공, 유지관리 및 철거에 이르는 건설 생애주기 동안의 다양한 데이터를 입력하고 관리가 가능하도록 구조화 되어 있기 때문이다. 이렇게 구조화된 모델을 가지고 다양한 분석 및 해석이 가능해지기 때문에 BIM의 역할은 점점 더 증대되어 가고 있다. 노르웨이 베스트바넨의 국립예술박물관 현상설계 경기를 시작으로 국내외적으로 BIM을 설계 경기 및 평가에 적용하려는 노력이 다각적으로 발생하고 있다. 이때, 기존 방식의 설계경기와는 다르게 BIM기반으로 전사적인 시뮬레이션을 통한 자동적이며, 신뢰성이 높고 효율적인 평가가 가능하게 된다. 이를 위하여 각 BIM 도구를 대상으로 하는 모델링 가이드가 필요하며 이를 검증할 수 있는 평가시스템의 요구가 생기게 되었다. 본 논문은 건설산업 분야에 새로운 패러다임을 이끌고 있는 BIM 기술을 이용한 새로운 방식의 설계평가 및 절차의 방향에 대해, 전력거래소 본사사옥 등의 이전 설계경기 사례를 비교분석하고 이에 대한 개선방안을 설명함으로써 향후 발주될 BIM기반 건축설계경기 평가의 방향을 제시하고자 한다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.39-56
• /
• 2010

Statistical process control (SPC) is a powerful technique for monitoring, managing, analysing and improving the process performance. However, its has limitations such as lack of engineering, statistical skill and training, and lesser importance of activity. To solve the problems, this study proposes an intelligent SPC system using specified agents which are derived through analysis and evaluation of the SPC activities. The activities investigated by the relevant researches are categorized as collection, process analysis, diagnosis, detection, cause analysis and rule generation. Also, the evaluation criteria are established as feasibility of automation, frequency, level and time. The requirements of the agent functions are derived by the evaluation, and the types of customized agents are as data collection, store, analysis, diagnosis, monitoring, alarm and reporting. A prototype SPC system represents that the functions of the proposed agents are successfully validated.

• International Journal of Quality Innovation
• /
• 제7권2호
• /
• pp.141-156
• /
• 2006

This study describes a novel algorithm for optimizing the quality yield of silicon wafer slicing. 12 inch wafer slicing is the most difficult in terms of semiconductor manufacturing yield. As silicon wafer slicing directly impacts production costs, semiconductor manufacturers are especially concerned with increasing and maintaining the yield, as well as identifying why yields decline. The criteria for establishing the proposed algorithm are derived from a literature review and interviews with a group of experts in semiconductor manufacturing. The modified Delphi method is then adopted to analyze those results. The proposed algorithm also incorporates the analytic hierarchy process (AHP) to determine the weights of evaluation. Additionally, the proposed algorithm can select the evaluation outcomes to identify the worst machine of precision. Finally, results of the exponential weighted moving average (EWMA) control chart demonstrate the feasibility of the proposed AHP-based algorithm in effectively selecting the evaluation outcomes and evaluating the precision of the worst performing machines. So, through collect data (the quality and quantity) to judge the result by AHP, it is the key to help the engineer can find out the manufacturing process yield quickly effectively.

• 한국가정과교육학회지
• /
• 제33권4호
• /
• pp.119-137
• /
• 2021

본 연구는 청소년의 바람직한 식생활 형성을 위해 온·오프라인을 연계할 수 있는 '블렌디드 러닝'의 수업 방식을 활용하여 중학교 기술·가정① '청소년기 영양과 식행동' 단원으로 교수·학습과정안을 개발하는데 목적이 있다. 본 연구에서 개발된 교수·학습과정안은 한국교육과정평가원의 '분석-설계-개발-평가 및 수정'모형을 적용하였다. 블렌디드 러닝에 적합한 교과서 내용을 분석하고, 차시별 주제, 교수전략, 매체 및 평가도구를 선정하여 교수·학습과정안을 설계하였으며 이를 활용하여 교수·학습과정안, 활동지, 평가도구를 개발하였다. 또한, 개발된 교수·학습과정안은 전문가 검증을 받아 수정·보완하였다. 본 연구의 결과를 살펴보면, 블렌디드 러닝을 적용한 '청소년기 영양과 식행동' 단원의 교수·학습과정안은 현시점에 부합성이 있는 것으로 나타났으며 블렌디드 러닝을 적용한 온라인 수업에서는 학생들이 모둠 및 발표 활동을 제시하여 학습자들의 참여도 및 흥미가 저하되지 않도록 구성되었다. 그리고 개발된 교수·학습과정안은 수업 의도에 맞게 패들렛, 띵커벨과 같은 원격수업 도구를 사용하여 온라인 환경에서도 원활하게 수업이 진행되도록 개발되었음을 확인하였다. 본 연구에서 개발된 블렌디드 러닝을 활용한 교수·학습과정안이 온라인 수업에서 청소년기인 학생들의 올바른 식생활을 실천할 수 있는 수업으로 활용될 수 있고, 더불어 다양한 수업환경을 띠는 블렌디드 러닝 수업에서도 효과적으로 활용될 수 있기를 기대한다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.621-631
• /
• 2017

In this paper, we study the various impacts of connecting distributed generation (DG) to the distribution network. The comprehensive evaluation index system (CEIS) of four hierarchies is established, considering economy, reliability and voltage quality, and the calculation methods of different indexes are presented. This paper puts forward an improved triangular fuzzy number analytic hierarchy process (ITFNAHP) to weight the second level indexes (SLI) and the third level indexes (TLI), and calculates the variation coefficient to weight the fourth level indexes (FLI). We calculate the comprehensive weight coefficients based on the weight coefficients of the SLI, TLI and FLI, and then calculate the comprehensive evaluation of satisfaction (CES) of different access schemes. On the basis of the IEEE 33-bus example system, simulations of the calculation methods and the comprehensive evaluation method are carried out under different DG access schemes according to the same total investment cost and the same permeability, respectively, and the simulation results are analyzed and discussed.