• Progress in Medical Physics
• /
• v.28 no.4
• /
• pp.181-189
• /
• 2017

The conventional delivery quality assurance (DQA) process for RapidArc (Varian Medical Systems, Palo Alto, USA), has the limitation that it measures and analyzes the dose in a phantom material and cannot analyze the dosimetric changes under the motional organ condition. In this study, a DQA method was designed to overcome the limitations of the conventional DQA process for internal target volume (ITV) based RapidArc. The dynamic DQA measurement device was designed with a moving phantom that can simulate variable target motions. The dose distribution in the real volume of the target and organ-at-risk (OAR)s were reconstructed using 3DVH with the ArcCHECK (SunNuclear, Melbourne, USA) measurement data under the dynamic condition. A total of 10 ITV-based RapidArc plans for liver-cancer patients were analyzed with the designed dynamic DQA process. The average pass rate of gamma evaluation was $81.55{\pm}9.48%$ when the DQA dose was measured in the respiratory moving condition of the patient. Appropriate method was applied to correct the effect of moving phantom structures in the dose calculation, and DVH data of the real volume of target and OARs were created with the recalculated dose by the 3DVH program. We confirmed the valid dose coverage of a real target volume in the ITV-based RapidArc. The variable difference of the DVH of the OARs showed that dose variation can occur differently according to the location, shape, size and motion range of the target. The DQA process devised in this study can effectively evaluate the DVH of the real volume of the target and OARs in a respiratory moving condition in addition to the simple verification of the accuracy of the treatment machine. This can be helpful to predict the prognosis of treatment by the accurate dose analysis in the real target and OARs.

• Structural Monitoring and Maintenance
• /
• v.5 no.1
• /
• pp.79-92
• /
• 2018

The evaluation theory of reliability, availability, maintainability and safety (RAMS) as a mature theory of state evaluation in the railway engineering, can be well used to the evaluation, management, and maintenance of complicated structure like the long-span bridge structures on the high-speed railway. Taking a typical steel-truss arch bridge on the Beijing-Shanghai high-speed railway, the Nanjing Dashengguan Yangtze River Bridge, this paper developed a new method of state evaluation for the existing steel-truss arch high-speed railway bridge. The evaluation framework of serving state for the bridge structure is presented based on the RAMS theory. According to the failure-risk, safety/availability, maintenance of bridge members, the state evaluation method of each monitoring item is presented. The weights of the performance items and the monitoring items in all evaluation levels are obtained using the analytic hierarchy process. Finally, the comprehensive serving state of bridge structure is hierarchical evaluated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.57-65
• /
• 2016

Threat evaluation is a process to estimate the threat score which enemy aerial threat poses to defended assets. The objective of threat evaluation is concerned with making an engagement priority list for optimal weapon allocation. Traditionally, the threat evaluation of massive air threats has been carried out by air defence experts, but the human decision making is less effective in real aerial attack situations with massive enemy fighters. Therefore, automation to enhance the speed and efficiency of the human operation is required. The automatic threat evaluation by air defense experts who will perform multi-variable judgment needs formal models to accurately quantify their linguistic evaluation of threat level. In this paper we propose a threat evaluation model by using a fuzzy rule-based inference method. Fuzzy inference is an appropriate method for quantifying threat level and integrating various threat attribute information. The performance of the model has been tested with a simulation that reflected real air threat situation and it has been verified that the proposed model was better than two conventional threat evaluation models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.23-30
• /
• 2017

In the AEC(Architecture, Engineering and Construction) industry, BIM(Building Information Modeling) technology not only helps design intent efficiently, but also realizes an object-oriented design including building's life cycle information. Thus it can manage all data created in each building stage and the roles of BIM are greatly expanded. Contractors and designers have been trying to adopt BIM to design competitions and validate it for the best result in various aspects. Via the computational simulation which differs from the existing process, effective evaluation can be done. For this process, a modeling guideline for each kind of BIM tool and a validation system for the confidential assessment are required. This paper explains a new process about design evaluation methods and process using BIM technologies which follow the new paradigm in construction industry through complement points by an example of a competition activity of the Korea Power Exchange(KPX) headquarter office. In conclusion, this paper provides a basic data input guideline based on open BIM for automatic assessment and interoperability between different BIM systems and suggests a practical usage of the rule-based Model Checker.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1802-1809
• /
• 2011

A distribution method of limited budget for rail line facility improvement is to use investment priorities of rail line segments based on their deterioration. In this paper we present an evaluation method of rail line segment deterioration which can be used to distribute limited budget. Rail line facilities include rail track, crossing, road bed, bridge, tunnel. These facilities deterioration and line shape can affect line segment deterioration. Deterioration evaluation method we present is a weighted sum of each component deterioration scores. The component weight can be obtained from experts using analytic hierarchy process.

• Korean Journal of Microbiology
• /
• v.27 no.4
• /
• pp.436-438
• /
• 1989

We propose a method for rapid evaluation and permanent record of sodium dodecyl sulfate polyacrylamide gel electrophoretic runs. This method is based on the photocopy process, rather than on photography and requires no extensive or expensive investment. Comparison of a print obtained through this method and a 35mm photography indicated, on a balanced gel, equal sensitivity.

• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.39-56
• /
• 2010

Statistical process control (SPC) is a powerful technique for monitoring, managing, analysing and improving the process performance. However, its has limitations such as lack of engineering, statistical skill and training, and lesser importance of activity. To solve the problems, this study proposes an intelligent SPC system using specified agents which are derived through analysis and evaluation of the SPC activities. The activities investigated by the relevant researches are categorized as collection, process analysis, diagnosis, detection, cause analysis and rule generation. Also, the evaluation criteria are established as feasibility of automation, frequency, level and time. The requirements of the agent functions are derived by the evaluation, and the types of customized agents are as data collection, store, analysis, diagnosis, monitoring, alarm and reporting. A prototype SPC system represents that the functions of the proposed agents are successfully validated.

• International Journal of Quality Innovation
• /
• v.7 no.2
• /
• pp.141-156
• /
• 2006

This study describes a novel algorithm for optimizing the quality yield of silicon wafer slicing. 12 inch wafer slicing is the most difficult in terms of semiconductor manufacturing yield. As silicon wafer slicing directly impacts production costs, semiconductor manufacturers are especially concerned with increasing and maintaining the yield, as well as identifying why yields decline. The criteria for establishing the proposed algorithm are derived from a literature review and interviews with a group of experts in semiconductor manufacturing. The modified Delphi method is then adopted to analyze those results. The proposed algorithm also incorporates the analytic hierarchy process (AHP) to determine the weights of evaluation. Additionally, the proposed algorithm can select the evaluation outcomes to identify the worst machine of precision. Finally, results of the exponential weighted moving average (EWMA) control chart demonstrate the feasibility of the proposed AHP-based algorithm in effectively selecting the evaluation outcomes and evaluating the precision of the worst performing machines. So, through collect data (the quality and quantity) to judge the result by AHP, it is the key to help the engineer can find out the manufacturing process yield quickly effectively.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.4
• /
• pp.119-137
• /
• 2021

This study aimed to develop a teaching-learning process plan for the 'adolescent nutrition and dietary behavior' unit of middle school technology and home economics through blended learning teaching method. "Analysis-Design-Development-Evaluation and Revision" model developed by Korea Institute of Curriculum and Evaluation(KICE) was applied to developing the teaching-learning process plan. The authors analyzed subject contents suitable for blended learning, and then designed a teaching-learning process plan by selecting the topics, developing the teaching strategies, and deciding on the media and evaluation tools for each class. Based on the plan for each week, the final version of the teaching-learning process plan, handouts for activities, and evaluation tools were developed. The teaching-learning process plan was revised and supplemented based on the expert verification results. The developed teaching-learning process plan which applied blended learning method was considered suitable for the current curriculum, and the group presentation activities implimented in the online classes were found to encourage learners' participation and interest. Also, the developed teaching-learning process plan could be used in the online only environment without any issues depending on the intention of the classes, by the appropriate use of distance learning tools such as Paddles or Thinkerbells. The developed teaching-learning course plan is expected to be effectively used in either online or blended learning environment, as a means of helping adolescent students improve their dietary life.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.621-631
• /
• 2017

In this paper, we study the various impacts of connecting distributed generation (DG) to the distribution network. The comprehensive evaluation index system (CEIS) of four hierarchies is established, considering economy, reliability and voltage quality, and the calculation methods of different indexes are presented. This paper puts forward an improved triangular fuzzy number analytic hierarchy process (ITFNAHP) to weight the second level indexes (SLI) and the third level indexes (TLI), and calculates the variation coefficient to weight the fourth level indexes (FLI). We calculate the comprehensive weight coefficients based on the weight coefficients of the SLI, TLI and FLI, and then calculate the comprehensive evaluation of satisfaction (CES) of different access schemes. On the basis of the IEEE 33-bus example system, simulations of the calculation methods and the comprehensive evaluation method are carried out under different DG access schemes according to the same total investment cost and the same permeability, respectively, and the simulation results are analyzed and discussed.