• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.293-297
• /
• 2007

The purpose of this study was to investigate the meaning of leisure experiences in the lives of unmarried women. To accomplish this purpose, this study focused on the cultural context of leisure activity of unmarried women. A total of 4 participants were selected through the process of purposive sampling. An ethnographic data was collected by the method of 'experiential description' phenomenologically based data on the leisure experience, participant observation, and in-depth interview. All verbal data from experiential description, participation observation, and in-depth interview were tape recorded and later transcribed, and analyzed through constant comparative method based on the phenomenological analysis. The following findings were the result of this study. three definitional components of leisure experience of unmarried women were identified as follows: 1) enjoyment and interest, 2) escape, and 3) freedom.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.302-305
• /
• 1995

ITO(indium tin oxide) that is both conductive in electricity and transparent to the visible ray is called transparent conducting thin film. Nowaday, according to the development of flat panel display such as LCD(Liquid Crystal display, EL(electolumine- scence display), PDP(plasma display panel), ECD(electrocromic display), the higher quality in the low temperature process has been asked to reduce the production cost and to have a good uniformity on a large substrate. In this study, we prepared indium tin oxide(ITO) by a cylindrical DC magnetron sputtering with Indium-tin (9:1) alloy target instead of indium-tin oxide target. To reduce the defact in ITO, the effect on ITO by varing the magnetic field intensity and the applied voltage ares studied. the resistivity of the film deposited in oxygen partial pressure of 5% and substrate temperature of 140$^{\circ}C$. is 1.6${\times}$10$\^$-1/$\Omega$$.$cm with 85% optical transmission in viaible ray.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.194-195
• /
• 2006

개인 휴대 통신 기기의 급속한 발달로 인해 부품의 소형화, 고집적화가 중요한 요소로 대두되고 있으며 이를 위해서는 모듈내부에 3차원적인 수동소자의 내장이 가능한 LTCC (Low Temperature Co-fired Ceramics) 공정이 각광받고 있다. Embedded Capacitor를 제조하기 위해 유전율이 7.6과 6.5인 LTCC 재료를 이종접합 하여 제조하였으며 이종재료의 수축거동 차이에 의한 camber가 발생하였다. 이를 해결하고 또한 고주파 부품용 정밀회로 패턴을 구 현하기 위해 PLAS 방식의 Constrained Sintering 공정을 적용하여 camber 문제를 해결하였으며 capacitance 값이 두 이종재료의 유전율과 1:1로 비례하지 않았는데 이는 유전율 65 tape에 잔존하는 기공 때문으로 판단되며 미세구조로써 확인하였다.

• Journal of the Korean Home Economics Association
• /
• v.42 no.7
• /
• pp.145-164
• /
• 2004

The purpose of this study is to understand how late middle-aged women in our society view and adapt to “aging”. This is a crucial step forward linking two stages, the growing young age and the declining old age, which eventually improves the qualify of life in old a9e. This qualitative study used Personal narratives extracted from tape-recorded interviews of 20 late middle-aged women in their fifties and analyzed key experiences of late middle-aged women in their transition to old age. Participants were observed to perceive not only many limitations but also alternative potentialities. First, the major challenges due to the closing young era were ‘physical declines’, including health problems and wrinkles, and ‘leaving children’. Second, the potentialities to start a new era also could be found. Many participants found themselves to be generous enough to assist others in need. In addition, they looked to adapt to new challenges. It was likely that the many adversities that they had faced made them resilient. These results show that late middle-aged women were actively negotiating with themselves and their surroundings in order to overcome their losses, maintain their potentialities, and, in the process, acknowledge their impending old age for better preparation.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.43-50
• /
• 2016

In order to suggest the optimal manufacturing technology of composite wings of solar-powered unmanned aerial vehicles, this study compared forming technologies to reduce wing weight for long-endurance flight and to improve the manufacturing process for cost-saving and mass production. It compared the manufacturing time and weight of various composite wing molding technologies, including cocuring, secondary bonding, and manufacturing by balsa. As a result, wing weight was reduced through cocuring methods such as band type composite fiber/tape lamination technology, which enabled prolonged flight duration. In addition, the reduced manufacturing time led to a lower cost, which is a good example of weight lightening for not only small solar-powered UAVs, but also composite aircraft.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.276-279
• /
• 2000

When high temperature superconducting tapes is fabricated using the PIT (Powder In Tube) method, the length of HTS tapes is increased more than 500 ${\sim}$ 1,000 times of initial powder packed billet. On mechanical processing, heterogeneous properties between the ceramic superconducting core and Ag/Ag alloy sheath occur the non-uniformity deformation as like sausaging that deteriorate the critical current properties of HTS tapes. In this study, we investigated the workability of Bi-2223/Ag/Ag alloy sheath tapes fabricated by the PIT method involving a number of different mechanical processes, multi drawing and rolling. In order to obtain the high critical current density and high uniformity of Bi-2223/Ag sheath tapes, the influences of powder packing density, drawing die angle and rolling parameters were studied. We found that the roll diameter is an important variable in the rolling process, as critical current of tapes rolled using 250 mm rolls was higher than that using 150 mm rolls.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.159-171
• /
• 2005

It has been increased to use the SAN with increasing the size of storage device. In this paper, we design and implement a backup system to support the tape and disk based backup with devices and media in SAN cluster. Our backup system provides device and media management for efficiently managing a number of devices and media in SAN cluster. It also supports script management to process an additional tasks requested by clients and monitoring to control and manage tasks in execution. In addition, it supports reporting to offer backup and restore information to clients.

• Journal of Korean Academy of Nursing
• /
• v.29 no.3
• /
• pp.494-506
• /
• 1999

The purpose of this study is to understand the structure of mothers of mentally handicapped daughters' lived experience, to apprehend the connectedness of the structure of the experience with concept of Parse's human becoming theory, and to provide a foundation for nursing research and education. Data collection was conducted from October 1995 to April 1996. Research participants were eight mothers of mentally handicapped daughters whose ages ranged from 12 to 18 attending special schools located in either Inchon or Seoul. The researcher had interviews with them over their lived experience conducted tape recorded, and made an analysis according to Parse's “human becoming research methodoloy.” The data were collected using the dialogical engagement process “I and You,” the participant researcher and the participant subject. The data were analyzed using the extraction-synthesis and heuristic interpretation. The structural integration is illustrated in the following : 1) Realizing the mother's role of mentally handicapped daughters and admitting situation. 2) Concealing a part of their relationship with others is interpreted as revealing-concealing. 3) Living a life kept moving between separating and connecting. 4) Their flight back voluntarily to improve the situation is interpreted as powering. The conceptual integration which emerged was the lived experience of mothers is powering through the revealing-concealing and connecting-separating of valuing.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.2
• /
• pp.15-20
• /
• 2016

Background: The purpose of this study was to compared of scapular position between operation side and non-operation side to the rotator cuff surgery. Methods: This study was carried out with a total 34 patients: male (n=14), female (n=20). Shoulder range of motion (ROM), the quadruple visual analogue scale (QVAS), the shoulder pain and disability index (SPADI), and the scapular index (SI) were used to assess shoulder posture and function. SI was the resting position of the scapular was determined by measuring the distance from the mid-point of the sternal notch (SN) to the medial aspect of the coracoid process (CP) and the horizontal distance from the posterolateral angle of the acromion (PLA) to the thoracic spine (TS) with a soft tape measure. The SI was calculated using the equation: [(SN to CP/PLA to TS) ${\times}$ 100]. Results: There were no significant difference in ROM, QVAS to rotator repair patients according to SI (p>.05). There were significant differences in SI between the operation side and the non-operation side (p<.01). Conclusions: Scapular position was operation side more internal rotation, protraction, abduction than non-operation side. Therefore, health professionals managing for rotator cuff tear repair patients should consider scapular position.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.