• Korean Journal of Oriental Medicine
• /
• v.15 no.2
• /
• pp.33-37
• /
• 2009

Objectives : The authors performed this study to further understand Saam acupuncture method in an aspect of formation process. Methods : We were finding Saam's idea in a preface of the book. And we analyzed Saam acupuncture patterns to understand their formation. Results & Conclusion : We assume that Saam acupuncture patterns has formed over time. We were able to split their patters into three phases. That is Primitive-phase, Basic-phase and Practical-phase. We think they are traces of Formation Process. In the first, Saam found DongHaeng-acupoints that have in common Five Element between the five viscera and acupoint. And then, he compounded other meridian's DongHeng-acupoints to control self meridian. Finally acupoints of self meridian were added.

• Journal of the Korean Ceramic Society
• /
• v.25 no.3
• /
• pp.300-306
• /
• 1988

The catalytic effect of salts on formation of ${\alpha}$-calcium sulfate hemihydrate under water vapor at atmospheric pressure was studied and the formation of q-calcium sulfate hemilydrate from by-product gypsum of phosphoric acid process was investigated. The order of catalytic effect of salts are as follow: Ammonium chloride>Sodium succinate>Calcium chloride>Sodium tartrate>Magnesium chloride The prismatic crystals was formed when ammonium chloride, calcium chloride and magnesium chloride was added, whereas the needle crystals was formed when sodium tartrate was added. Ammonium chlorideis most successful in catalytic effects in formation of ${\alpha}$-calcium sulfate hermihydrate for the by-product gypsum of phosphoric acid process.

• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.66-72
• /
• 1988

The effect of salts on the formation of ${\alpha}$-hemihydrated gypsum at boiling temperature under atmospheric pressure was studied by the solubility measurement method, and the formation of ${\alpha}$-hemihydrated gypsum from by-product gypsum of phosphoric acid process in the salts solution were investigated. The order of catalytic effect of salt on the formation of ${\alpha}$-hemihydrated gypsum are as follows: NH4Cl>NaCl>NaNO3. In the salts solution of sodium nitrate, sodium chloride, and ammonium chloride, prismatic ${\alpha}$-hemihydrated gypsum was obtained and the crystal form was converted to needle form in complex solution with sulfuric acid. The P2O5 content in gypsum was largely decreased in this atmosphoric solution process.

• Applied Microscopy
• /
• v.28 no.4
• /
• pp.513-525
• /
• 1998

The spermatogenetic process in the edible giant snail is similar to those in the other snails, except for the axoneme formation process. In this study, the axoneme formation process in the giant snail was mainly examined by means of electron microscopy. The tail portion of a spermatozoon is about $160{\mu}m$ long, and extends straight to the rear, surrounded by two large and long mitochondria in spiral forms. A number of glycogen particles $(40\sim70nm)$ are found in the swollen matrix of the mitochodria. The axoneme which composes the tail of a spermatozoon is surrounded by $7\sim10$ lamella-form fibrous sheaths of about $0.2{\mu}m$ in thickness. Most of the mature spermatozoa are found to be clustered into a group of $5\sim7$ ea in syncytial bridges formed by cytoplasmic processes. Sertoli cells contain glycogen particles, endoplasmic reticulum, a lot of mitochondria, and lipids in their cytoplasm. They protrude their filiform pseudopodia and phagocytize abnormal spermatids or spermaozoa.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.74-79
• /
• 2004

The effects of change in injection pressure on spray structure have been investigated in high temperature and pressure field. To analyze the structure of evaporative diesel spray is important in speculation of mixture formation process. Also emissions of diesel engines can be controlled by the analyzed results. Therefore, this study examines the evaporating spray structure by using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 72 MPa to 112 MPa with a high pressure injection system(ECD-U2). The PIV(Particle Image Velocimetry) technique was used to capture flow variation of the evaporative diesel spray. A study on the mixture formation process of diesel spray was executed by the results of flow analysis in this study. Consequentially the large-scale vortex flow could be found in downstream spray and the formed vortex governs the mixture formation process in diesel spray.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.973-976
• /
• 1997

Process behavior in metal cutting results from the chip formation process which is not easily observable and measurable during machining. By means of the finite element method chip formation in orthogonal metal cutting is modeled. The reciprocal interaction between mechanical and thermal loads is taken into consideration by involving the thermo-viscoplastic flow behavior of workpiece material. Local and temporal distributions of stress and temperature in the cutting zone are calculated depending on the cutting parameters. The calculated cutting forces and temperatures are compared with the experimental results obtarned from orthogonal cutting of steel AISl 4140. The model can be applied in process design for selection of appropriate tool-workpiece combination and optimum cutting conditions in term of mechanical and thermal loads.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.2
• /
• pp.71-77
• /
• 2016

There has been unknown polynomial time algorithm for cellular formation problem (CFP) that is one of the NP-hard problem. Therefore metaheuristic method has been applied this problem to obtain approximated solution. This paper shows the existence of polynomial-time heuristic algorithm in CFP. The proposed algorithm performs coarse-grained and fine-grained cell formation process. In coarse-grained cell formation process, the cell can be formed in accordance with machine frequently used that is the number of other products use same machine with special product. As a result, the machine can be assigned to most used cell. In fine-grained process, the product and machine are moved into other cell that has a improved grouping efficiency. For 35 experimental data, this heuristic algorithm performs better grouping efficiency for 12 data than best known of meta-heuristic methods.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.33.1-33.1
• /
• 2019

Protostars grow their mass by the accretion of disk material, which is infalling from the envelope. This accretion process is important to the physical and chemical conditions of the disk and envelope, and thus, the planets yet to be formed from the disk material. Therefore, if we map the physical and chemical properties of disks and envelopes, we can study indirectly the accretion process in star formation. In particular, the chemical distribution in the disk and the inner envelope of a young stellar object is greatly affected by the thermal history, which is mainly determined by the accretion process in the system. In my talk, I will review the episodic accretion model for the low mass star formation and observational efforts to find the evidence of episodic accretion. Finally, I will present our recent ALMA detection of several complex organic molecules associated directly with the planet formation in V883 Ori, which is in the burst accretion phase.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.1
• /
• pp.103-114
• /
• 2015

This research aims to identify the network formation process of wine industry based on patents for technological innovation focused on Shandong region. China government initiated supporting policy upbringing wine cluster in Shandong for regional economic development since 2006. First of all, China government focused on upbringing wine industry on the network formation process. Especially, it is evaluated that Shangdong region develops wine industry by research-oriented. Secondly, for the purpose of this research, the formation of network in Shandong region explained the strategy of Chinese government corresponded with growing wine industry. As a implication from the network formation process, this research confirmed that the wine industry grows industry-university-government linkages strategically according to government strategy with government policy integration integrating regional development.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.73-80
• /
• 2016

This study focuses on the formation of input release lots in a semiconductor wafer fabrication facility. After the order-lot pegging process assigns lots in the fab to orders and calculates the required quantity of wafers for each product type to meet customers' orders, the decisions on the formation of input release lots should be made to minimize the production costs of the release lots. Since the number of lots being processed in the wafer fab directly is related to the productivity of the wafer fab, the input lot formation is crucial process to reduce the production costs as well as to improve the efficiency of the wafer fab. Here, the input lot formation occurs before every shift begins in the semiconductor wafer fab. When input quantities (of wafers) for product types are given from results of the order-lot pegging process, lots to be released into the wafer fab should be formed satisfying the lot size requirements. Here, the production cost of a homogeneous lot of the same type of product is less than that of a heterogeneous lot that will be split into the number of lots according to their product types after passing the branch point during the wafer fabrication process. Also, more production cost occurs if a lot becomes more heterogeneous. We developed a multi-dimensional dynamic programming algorithm for the input lot formation problem and showed how to apply the algorithm to solve the problem optimally with an example problem instance. It is necessary to reduce the number of states at each stage in the DP algorithm for practical use. Also, we can apply the proposed DP algorithm together with lot release rules such as CONWIP and UNIFORM.