• 산업기술연구
• /
• 제26권B호
• /
• pp.173-181
• /
• 2006

We analyzed systematically particle growth in the pulsed $SiH_4$ plasmas by a numerical method and investigated the effects of pulse modulations (pulse frequencies, duty ratios) on the particle growth. We considered effects of particle charging on the particle growth by coagulation during plasma-on. During plasma-on ($t_{on}$), the particle size distribution in plasma reactor becomes bimodal (small sized and large sized particles groups). During plasma-off ($t_{off}$), there is a single mode of large sized particles which is widely dispersed in the particle size distribution. During plasma on, the large sized particles grows more quickly by fast coagulation between small and large sized particles than during plasma-off. As the pulse frequency decreases, or as the duty ratio increases, $t_{on}$ increases and the large sized particles grow faster. On the basis of these results, the pulsed plasma process can be a good method to suppress efficiently the generation and growth of particles in $SiH_4$ PCVD process. This systematical analysis can be applied to design a pulsed plasma process for the preparation of high quality thin films.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권4호
• /
• pp.249-254
• /
• 2012

Bilateral coronoid process hyperplasia is a rare condition characterized by an enlarged mandibular coronoid process. The painless progressive reduction of a mouth opening is caused by coronoid process impingement on the posterior aspect of the zygomatic bone. Hyperplasia of the bilateral coronoid process leads to the restriction of a mandibular opening consequent to the impingement of the enlarged coronoid process on the temporal surface of the zygomatic bone or with the medial surface of the zygomatic arch. The process has been diagnosed as developmental hyperplasia. Otherwise, the development of the coronoid process may be associated with growth hormone. This paper describes a case of trismus caused by coronoid hyperplasia in an idiopathic short-stature patient who received growth hormone therapy by somatropin injections.

• 대한한방소아과학회지
• /
• 제13권1호
• /
• pp.17-62
• /
• 1999

Recently lots of books on the process of growing have been published on adolescence and their parents hope to grow tall but yet lacked the correct knowledge. Before helping the growth of body, the best way is to do away with the check factors of the human body. Therefore oriental and occidental medicine study on the inhibition of growth and the result of case study about life therapy, kinesiatrics, including medical therapy are as follows: The habits that help the process of growing are deep sleep, balanced diets, daily physical exercise, good posture. It is essential for people to relieve stress. The physical exercises that promote the process of growing are as follows: to stretch out, daily suitable exercise which stimulates the metabolism of human body to increase levels of growth hormone and excite growth plate, to hasten the process of growing, Oriental medicine causes on the inhibition of growth show many factors: kidney trouble is the inhibited cause, spleen ailment is the acquired ground. The lack of essence of the dual principal of the negative and the positive makes people the inhibition of growth. All these things including fire and dryness have close relations.

• 비교문화연구
• /
• 제39권
• /
• pp.83-95
• /
• 2015

Every country has a dark history in the process of transition to a modern state. Many countries have until the 21st century, especially in East Asia, colonialism, has experienced conflict influenced, racial discrimination, the trauma of such massacre. Such a dark history in many countries are also still in progress. Dark History of China, which maintains the proletarian dictatorship is the 'Cultural Revolution(Wenhua da Geming)'. 'Cultural Revolution' is neither the outer aspect of the ideological struggle, but in fact it was not even class struggle ideology and class struggle. Put an end to the feudal intellectuals in China in the course of the tragedy stood and lead to build a new China suffered the humiliation of being betrayed from state power. Chinese writers after the 'Cultural Revolution' ended, was created in the process of creation reflects the tragedy of the 'Cultural Revolution' in the country(national memory) is suffering from the pain and suffering the same growth process as it saw this novel growth experienced in the personal growth process. "Road leaving at 18 years" of WiHua has ruled out the pain of growing national attention wholly to personal growth and pain. Such "Road leaving at 18 years" in the sense suggests the possibility of a typical growth story in China Contemporary Literature.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.42-46
• /
• 2009

With an aim of comparison, single grain Y-Ba-Cu-O (YBCO) bulk superconductors were fabricated using a liquid infiltration growth (LIG) process and a conventional melt growth (MTG) process with top seeding. The MTG process uses an $YBa_2Cu_3O_{7-x}$(Y123) powder as a precursor, while the LIG process uses $Y_2BaCuO_5(Y211)/Ba_3Cu_5O_8(Y035)$ pre-forms. The growth of a single Y123 domain on the top seed was successful in the both processes. Different feature between the two processes is the interior microstructure regarding the critical current density ($J_c$). The LIG-processed YBCO sample showed a lower porosity, more uniform distribution of Y211 particles and the enhanced Y211 refinement compared to the conventional MTG process. The $J_c$ improvement in the LIG process is attributed to the dispersion of finer Y211 particles as well as lower porosity within the Y123 superconducting matrix.

• 보건교육건강증진학회지
• /
• 제23권5호
• /
• pp.13-27
• /
• 2006

This study was performed to formulate the most recent traits of physical growth of youth, and to identify the need of youth for health promotion planning in modern Korea. Study participants were 171 boys and 400 girls in two senior high schools in Seoul, Korea. Health records were collected from the individual students in May 2005. Longitudinal data on stature and body weight from 6 to 16 years old were analysed. Significance tests on some measures were performed by t-test and ANOVA. Major conclusions were as follows: 1. Girls were taller than boys during the specific time of adolescence. However, this phenomenon was not found in the growth process investigated by peak age and in over-all mean growth process of body weight. 2. Peak age came later in boys than in girls in both stature and body weight. This meant that boys matured later in stature and body weight than girls. However, boys were larger in peak velocity than girls. 3. Peak ages distributed more widely in girls than in boys both for stature and body weight. 4. Even in such short growth process from 6 through 16 years old, growth spurt tended to appear in several times. 5. Growth spurt tended to appear more often in boys than in girls.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.203-206
• /
• 1997

• 대한전자공학회논문지
• /
• 제22권1호
• /
• pp.34-40
• /
• 1985

시스뎀 압력이 1.0 기압[대기압 공정]일 경우와 0.1 기압(감압 공정)일 경우에 대해, SiH2Cl2를 사용했을 때의 에퍼택셜층 및 폴리실리콘의 성장 현상과 HCI을 사용했을 때의 이것들의 에칭 현상을 조사하였다. 실험적으로 구한 성장 속도 및 에칭 속도에 대한 식들로부터 Sih2Cl2와 HCI을 혼합하여 사용할 경우에 대한 선화적 에퍼택시가 가능한 공정 조건이 예측되었다. 그 결과, 선택적 에퍼택셜 성장 영역이 감압 공정에서는 실험 범위내에서 존재하였지만 대기압 공정에서는 존재하지 않는 것으로 나타났다. 이 것은 대기압과 감압에서의 성장 속도 및 에칭 속도가 차이가 나기 때문에 기인하는 것이다.

• 산업기술연구
• /
• 제35권
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권4호
• /
• pp.275-287
• /
• 2000

Fermentation strategies for recombinant protein production in Pichia pastoris have been investigated and are reviewed here. Characteristics of the expression system, such as phenotypes and carbon utilization, are summarized. Recently reported results such as growth model establishment, app58lication of a methanol sensor, optimization of substrate feeding strategy, DOstat controller design, mixed feed technology, and perfusion and continuous culture are discussed in detail.