• 한국제4기학회지
• /
• 제22권2호
• /
• pp.43-44
• /
• 2008

In this brief present are about some advanced results from investigation geomorphology in basin of river Tui and distribution of relief their peculiarities, types morphogenetic, convert to ekzogen process of relief ( fluvial system, permafrost process, wind process, slope process etc) and dynamic process of sedimentation.

• 자원환경지질
• /
• 제37권1호
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.303-318
• /
• 2017

In the shipping industry, it is well known that around 80 % or more of all marine accidents are caused fully or at least in part by human error. In this regard, the International Maritime Organization (IMO) stated that the study of human factors would be important for improving maritime safety. Consequently, the IMO adopted the Casualty Investigation Code, including guidelines to assist investigators in the implementation of the Code, to prevent similar accidents occurring again in the future. In this paper, a process of the human factors investigation is proposed to provide investigators with a guide for determining the occurrence sequence of marine accidents, to identify and classify human error-inducing underlying factors, and to develop safety actions that can manage the risk of marine accidents. Also, an application of these investigation procedures to a collision accident is provided as a case study This is done to verify the applicability of the proposed human factors investigation procedures. The proposed human factors investigation process provides a systematic approach and consists of 3 steps: 'Step 1: collect data & determine occurrence sequence' using the SHEL model and the cognitive process model; 'Step 2: identify and classify underlying human factors' using the Maritime-Human Factor Analysis and Classification System (M-HFACS) model; and 'Step 3: develop safety actions,' using the causal chains. The case study shows that the proposed human factors investigation process is capable of identifying the underlying factors and indeveloping safety actions to prevent similar accidents from occurring.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.113-115
• /
• 2010

We studied the methods to utilize vehicle-based mobile mapping system for field investigation work of digital map generation process. Map layers which should be checked by field investigation were analyzed to find the possibility of being checked with data from vehicle-based mobile mapping system. Also new process for digital map generation were suggested to adopt field investigation by vehicle-based mobile mapping system. We performed field investigation work on the Kangneung area by vehicle-based mobile mapping on a trial bases and compared the results with a results from usual field investigation method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.286-289
• /
• 2009

This paper deals with the experimental investigation of the steel cord straightening during the stranding process. The over-twisting and roller straightening process are essential to improve the product quality during the stranding process. To investigate the effectiveness of two processes, four experimental cases are constructed according to the use of an over-twister and two roller straighteners. Three assessment items, such as the residual torsion, the arc-height and the preforming ratio, are measured in each experimental case for the quantitative evaluation of a steel cord. The steel cord shape is also measured to investigate the variation of the straightness efficiently after passing through each process. Finally, the effectiveness of the over-twisting and the roller straightening process is explained based on the experimental results.

• 한국방재안전학회논문집
• /
• 제5권2호
• /
• pp.1-10
• /
• 2012

우리나라는 매년 태풍, 홍수 등으로 인한 자연재해가 빈번하게 발생하고 있으며, 특히 최근에는 기후변화 등의 영향으로 인하여 그 피해규모가 점차 증가하고 있는 실정이다. 이러한 자연재해가 발생하게 되면 복구를 위한 피해조사를 실시하게 되며, 피해조사내용을 바탕으로 피해규모와 피해금액을 확정하게 된다. 이러한 피해조사는 공공시설의 경우 피해종료 후 7일안에 모두 완료하여야만 한다. 현재 자연재해 피해조사는 현장에서의 조사 업무와 사무실에서의 국가재난관리시스템(NDMS, National Disaster Management System)에 입력하는 업무로 구분할 수 있다. 그러나 현장조사의 업무와 NDMS의 입력 업무가 대부분이 중복되고, 현장조사 자료의 시스템 입력을 위한 부수적인 업무들이 생기게 된다. 이러한 업무의 중복과 부수적인 업무로 인하여 업무의 효율성이 저하될 뿐만 아니라 많은 지자체 피해조사 담당 공무원들이 피해조사의 시간과 인력 부족이라는 문제점을 제시하고 있다. 본 연구에서는 이러한 문제점을 해결하기 위하여 현장에서 스마트폰을 이용하여 피해조사를 함과 동시에 NDMS에 입력할 수 있는 시스템을 개발하기 위한 스마트폰 기반의 피해조사 표준 업무 프로세스를 개발하였으며, 기존 대비 56%의 프로세스가 단축되었다.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.492-498
• /
• 2001

In the previous study, temperature monitoring of case about shrinkage fit process was performed and heat transfer model was developed in detail by feedback and tuning among monitoring result, process investigation, and analysis result. The gap element in contact between case and core was effectively used in analysis model. In present study, following things are performed to solve deformation of case due to shrinkage fit process on the basis of previous result. Above all, mechanical material properties of case are measured by case specimen for deformation analysis considering weldment of case. Deformation of case before and after shrinkage fit process is measured, too. Three dimensional deformation model is developed by the comparison and inspection between these experimental data and analysis results. Deformation analysis is simulated with the result of heat transfer analysis, in other words, non-coupled analysis is used. Finally the countermeasure for deformation is brought up through those.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.346-354
• /
• 2023

Objectives: Chemical accidents cause extensive human and environmental damage. Therefore, it is important to prepare measures to prevent their recurrence and minimize future damage through accident investigation. To this end, it is necessary to identify the accident occurrence process and analyze the extent of damage. In this study, the development process and damage range of actual chemical leakage accidents were analyzed using CFD. Methods: For application to actual chemical leakage accidents using FLACS codes specialized for chemical dispersion simulation among CFD codes, release rate calculation and 3D geometry were created, and scenarios for simulation were derived. Results: The development process of the accident and the dispersion behavior of materials were analyzed considering the influencing factors at the time of the accident. In addition, to confirm the validity of the results, we compared the results of the actual damage impact investigation and the simulation analysis results. As a result, both showed similar damage impact ranges. Conclusions: The FLACS code allows the detailed analysis of the simulated dispersion process and concentration of substances similar to real ones. Therefore, it is judged that the analysis method using CFD simulation can be usefully applied as a chemical accident investigation technique.

• 한국화재조사학회지
• /
• 제2권1호
• /
• pp.101-106
• /
• 2003

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.81-82
• /
• 2000