• The Korean Journal of Physiology and Pharmacology
• /
• 제1권5호
• /
• pp.505-513
• /
• 1997

To search the correlations between electrical activity and c-Fos expression in the process of vestibular compensation, we examined the changes of those two parameters in the medial vestibular nuclei (MVN) of unilaterally labyrinthectomized (ULX) rats. Spontaneous nystagmus with fast component toward the intact side disappeared gradually within 48 hours. Fourty eight hours after ULX, directional preponderance of the eye movement induced by sinusoidal rotation of the whole body which represents the symmetry of bilateral vestibular functions showed less than 20% by rotation of 0.1, 0.2, and 0.5 Hz, indicating the recovery of symmetry in bilateral vestibular functions. Six hours after ULX, spontaneous electrical activity of type I neurons resulted in asymmetry between bilateral MVN, however, the asymmetry of the electrical activity was decreased 48 hours after ULX. Immunocytochemical staining revealed that ULX produced dramatic induction of c-Fos positive cells in the MVN bilaterally. The number of c-Fos immunoreactive cells in the contralateral MVN was significantly higher than those in the ipsilateral MVN (p＜0.0001) 2 hours after ULX. Thereafter, the number of c-Fos positive cells decreased bilaterally and was slightly, but not significantly higher in the ipsilateral MVN at 48 hours after ULX. The present results suggest that both electrical activity of type I neurons and c-Fos expression in MVN following ULX will reflect underlying mechanisms of recovery process of vestibular compensation.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.59-67
• /
• 2014

PURPOSES : The purpose of this study is to analyse the longitudinal steel strain and stress of continuously reinforced concrete pavement(CRCP) with longitudinal and transverse direction at early age using stress dependent strain analysis method. METHODS : To measure the longitudinal steel strain, 9-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10min. intervals during 30days. In order to properly analyze the steel stress first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into stress dependent strain (elastic strain) and stress independent strain (thermal strain) and then stress dependent strain was applied to stress calculation of longitudinal steels. RESULTS : Steel strains were successfully measured during 30days. To verify the accuracy of temperature compensation process, measured coefficient of thermal expansion(COTE,$11.46{\times}10^{-6}m/m/^{\circ}C$) of longitudinal steel before paving was compared with that of unrestrained steel. Max. steel stress in the transverse direction shows about 266MPa at 23days after placement. CONCLUSIONS : Steel stresses in the longitudinal and transverse direction have been evaluated. In longitudinal direction, steel stress from the crack was rapidly reduced from 183MPa at crack to 18MPa from 600mm apart the crack. From this observation, stress effective length can be identified as within 600mm apart from the crack. In transverse direction, max. stress point was located near the center of pavement width and stress level(266MPa) is about 66% of yield stress of steel.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.146-159
• /
• 2018

This study analyzed what premium features significantly affect customer satisfaction and their recommendation, and what factors significantly affect product attributes. In the process, first, the loyalty program and the customer compensation program were studied to determine the impact of the customer satisfaction and recommendation. The study analyzed that quality and design of product properties had significant effects on all factors, but the brand was not significantly affected. Second, while superiority, differentiation and scarcity of luxury items are significant to customer satisfaction but superiority is only significant in relation to recommendation intention. Third, the preceding study shows that the customer compensation program has a significant impact on sales growth, but the study found that it was not for imported luxury car customers. Fourth, if the royalties program is low in awareness, it has been analyzed that the scarcity and customer satisfaction relationships among luxury goods have been adjusted. On the contrary, if there is a high level of awareness, it is analyzed that there is a control effect customer satisfaction and differentiation among luxury brands. In the conclusion, in order to satisfy customers at the import luxury car market, the differentiation of luxury goods by standard index must be strengthened and the brand must be strengthened among the attributes of the product. In addition, by raising awareness of the royalties program, the relationship between differentiation and customer satisfaction can be enhanced.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.291-297
• /
• 2023

Objectives: An epidemiological investigation was requested for a worker who developed COPD and IPF after long-term molding and firing at a domestic tile manufacturing site. We would like to share the results of the exposure assessment and the estimation of past work. Methods: The content of crystalline silica in four raw materials was analyzed, and the respirable fraction of crystalline silica and dust generated in the air from molding and firing workers and other processes were measured. The measurement and analysis method referred to the NIOSH method. Results: The crystalline silica content of the raw material was 24~47%. The concentration of crystalline silica in the molding and firing process workers and the surrounding area was at the level of the exposure standards set by the Ministry of Employment and Labor and ACGIH, and the respirable and total dust exposure levels were generally low. The crystalline silica concentration of the area samples measured to estimate past work was about twice as high as the exposure standard of the Ministry of Employment and Labor (0.05 mg/m3), and the exposure levels of respirable dust were also quite high at 0.903 and 1.332 mg/m3. Conclusions: It was confirmed that tile molding and firing workers are currently exposed to a fairly high level of crystalline silica, and a high level is also confirmed in area samples to estimate past work. In the past, it is judged that the level of exposure would have been much higher due to differences in production volume, working method, presence/absence of local ventilation facilities, and process layout. When working in such a working environment for a long time, respiratory diseases such as lung cancer, COPD, and IPF can occur.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.216-220
• /
• 2003

Most important for meaningful forging simulation is the determination of correct process parameters. In addition a check and a compensation of the data base after the comparison between experiments and the computation of the developed process is necessary. The existence of a systematic process parameter data bank for special kinds of forming process in combination with forging specific simulation lifts the value of the products. Finite volume method is applied to simulate the hot forging process to investigate the defects for the automobile product. Three typical forging processes have been investigated; Extrusion by hydrolic press, Upsetting by crank press and Inclined upsetting by hammer press. Simulated result has compared with the experiment and provided a direction to improve the process.

• 방송공학회논문지
• /
• 제24권3호
• /
• pp.463-471
• /
• 2019

본 논문에서는 양방향 화면 간 예측에서 LIC(Local Illuminance Compensation)의 복잡도 감소를 위한 방법을 제안한다. LIC는 화면 간 예측의 정확도를 높이기 위해 현재 블록과 참조블록의 주변 복원샘플을 이용하여 지역 조명 보상을 수행한다. 지역 조명 보상을 위해 필요한 가중치와 오프셋을 주변 복원 샘플을 이용하여 부/복호화기 양측에서 계산하기 때문에 별도의 정보 전송 없이 부호화 효율이 향상되는 장점이 있지만 부호화 예측 단계 및 복호화 단계에서 가중치와 오프셋을 구하기 때문에 부/복호화 복잡도가 높아지는 단점을 가지게 된다. 따라서 본 논문에서는 저 복잡도 LIC를 위해 크게 두 가지 방법을 제안한다. 첫 번째 방법은 양방향 예측 시 가중치 없이 오프셋만으로 조명보상을 적용하는 방법이고, 두 번째는 양방향 예측에서 LIC를 양방향예측을 통해 구해진 참조 블록의 가중 평균 단계 이후 적용하는 방법이다. 제안하는 방법의 성능 평가를 위하여 RA(Random Access) 조건에서 MPEG 표준 실험 영상의 B, C, D 클래스를 이용하여 BMS-2.0.1과 BD-rate 성능을 비교한다. 실험결과로서 본 논문에서 제안하는 방법이 BMS-2.0.1 대비 BD-rate 성능 관점에서 Y, U, V 각각에 대하여 평균 0.29%, 0.23%, 0.04%의 BD-rate 결과를 보이고 부/복호화 시간은 거의 동일하다. BD-rate의 손실이 있었지만, LIC 파라미터 유도과정에서 곱셈 연산이 제거되고 덧셈 연산이 절반으로 감소됨에 따라 LIC의 계산 복잡도가 크게 감소되었다.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.348-355
• /
• 2016

Precision motion stages used in the manufacturing process of flat-panel displays have inevitably low settling performance due to their huge mass and bulky structures. In order to improve the settling performance, several methods of frame vibration compensation have been developed so far. These methods are used to cancel the vibration by imposing a counter force or modifying the resonance mode of the frame of the stage. To compensate the frame vibration, high force actuators are required. In this paper, a mighty voice coil actuator is proposed to generate the counter force against the frame vibration. The proposed voice coil actuator has an axis-symmetric rectangular structure to achieve a large force with simple and low cost fabrication. Also, the voice coil actuator allows radial clearance up to ${\pm}4mm$. Using an optimized design process and a magnetic circuit model, the power consumption is minimized while the required force is obtained. With a power of 322 W, the VCA has been designed to have a maximum force of 574 N with a force constant of 164 N/A. Experimental results verified the force constant of the fabricated voice coil actuator is well matched with the designed value.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.1-8
• /
• 2020

This paper proposes a method for measuring friction forces and creating a friction model for a rotary motion control system as well as an autonomous vehicle testbed. The friction forces versus the velocity were measured, and the viscous friction, Coulomb friction, and stiction were identified. With a nominal PID (proportional-integral-derivative) controller, we observed the adverse effects due to friction, such as excessive steady-state errors, oscillations, and limit-cycles. By adding an adequate friction model as part of the augmented nonlinear dynamics of a plant, we were able to conduct a simulation study of a motion control system that well matched experimental results. We have observed that the implementation of a model-based friction compensator improves the overall performance of both motion control systems, i.e., the rotary motion control system and the Altino testbed for autonomous vehicle development. By utilizing a better simulation tool with an embedded friction model, we expect that the overall development time and cost can be reduced.

• 한국정보통신학회논문지
• /
• 제13권1호
• /
• pp.121-126
• /
• 2009

평면기반 컴퓨터 집적 영상 복원 (CIIR)기술은 3D 물체에 대한 깊이 영상복원이 가능한 기술이다. 그러나 복원되는 깊이에 따라 영상에 잡음이 발생하게 되어 해상도를 저하시키는 문제점이 있다. 본 논문에서는 이 문제점을 극복하기 위해서 CIIR 기술에 대한 신호 모델을 설명하고, 이를 통하여 CIIR 기술에 발생하는 잡음과 이를 보정하는 방법을 소개한다. 컴퓨터적 실험을 통하여 2D Gaussian 영상의 복원 영상에 대한 잡음 특성을 조사하고, 보정 과정을 통하여 고해상도의 영상을 얻을 수 있음을 보였다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.772-779
• /
• 2003

In the real world, business processes are very complex and composed or heterogeneous business activities. As the advent or the Web services enables business processes to be Integrated and to be automated. It makes enterprises integrate heterogeneous business processes from different business partners as well as their internal business processes. To support recent trends in integration of business processes, BPEL, WS-E and WS-T specipications have been established since 2002 WS-C and WS-T describe the reliable business environment including compensation (undo) or completed business processes. The compensation of business processes is a basic requirement for automation or business processes among business partners. Systems implementing these specifications, however, very rarely exist. It's not only because those specifications are developed recently. but also because they are not perfect yet. In this paper, a new business process transaction management, which complements the deficiency of WS-E and WS-T, is suggested. Furthermore, the new approach proposes the business logics for supervisory coordinators which manage serial and parallel business gates The modification or traditional WS-T specification and the simplification or WS-E specification make business processes managed effectively.